On Wed, Jul 28, 2010 at 10:41:27AM -0400, Jon Smirl wrote: > On Wed, Jul 28, 2010 at 10:24 AM, Maxim Levitsky ... > > You are right that my remote has JVC protocol. (at least I am sure now > > it hasn't NEC, because repeat looks differently). > > > > My remote now actually partially works with JVC decoder, it decodes > > every other keypress. > > > > Still, no repeat is supported. > > It probably isn't implemented yet. Jarod has been focusing more on > getting the basic decoders to work. More specifically, getting the basic decoders to work with very specific hardware -- i.e., the mceusb transceivers, and primarily focused only on RC-6(A) decode w/the mceusb bundled remotes. That, and getting the lirc bridge driver working for both rx and tx. Basically, my plan of attack has been to get enough bits in place that we have a "reference implementation", if you will, of a driver that supports all in-kernel decoders and the lirc interface, complete with the ability to do tx[*], and from there, then we can really dig into the in-kernel decoders and/or work on porting additional drivers to ir-core. I'm more focused on porting additional drivers to ir-core at the moment than I am on testing all of the protocol decoders right now. [*] we still don't have an ir-core "native" tx method, but tx on the mceusb works quite well using the lirc bridge plugin -- Jarod Wilson jarod@xxxxxxxxxx -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
