Now that a header exists with macros for the media interface bus-type
values, replace hardcoding numerical constants with the corresponding
macros in the DT sources.
Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/omap3-n900.dts | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index d40c3d2c4914..9cad9d6a83e2 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -9,6 +9,7 @@
#include "omap34xx.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
+#include <dt-bindings/media/video-interfaces.h>
/*
* Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall
@@ -194,7 +195,7 @@ port@1 {
csi_isp: endpoint {
remote-endpoint = <&csi_cam1>;
- bus-type = <3>; /* CCP2 */
+ bus-type = <MEDIA_BUS_TYPE_CCP2>;
clock-lanes = <1>;
data-lanes = <0>;
lane-polarity = <0 0>;
@@ -835,7 +836,7 @@ cam1: camera@3e {
port {
csi_cam1: endpoint {
- bus-type = <3>; /* CCP2 */
+ bus-type = <MEDIA_BUS_TYPE_CCP2>;
strobe = <1>;
clock-inv = <0>;
crc = <1>;
--
Regards,
Laurent Pinchart
