Quoting Laurent Pinchart (2022-06-08 18:43:48) > The uvcvideo driver historically uses the > > /* Comment > * style > */ > > for multi-line block comments, which is frowned upon. Patches for the > driver are required to use the more standard > > /* > * Comment > * style > */ > > style. This result in inconsistencies. Fix it by converting all > remaining instances of the old style. > > Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > --- > drivers/media/usb/uvc/uvc_ctrl.c | 33 ++++++---- > drivers/media/usb/uvc/uvc_driver.c | 54 +++++++++++------ > drivers/media/usb/uvc/uvc_isight.c | 13 ++-- > drivers/media/usb/uvc/uvc_queue.c | 6 +- > drivers/media/usb/uvc/uvc_status.c | 6 +- > drivers/media/usb/uvc/uvc_v4l2.c | 15 +++-- > drivers/media/usb/uvc/uvc_video.c | 96 ++++++++++++++++++++---------- > drivers/media/usb/uvc/uvcvideo.h | 15 ++--- > 8 files changed, 156 insertions(+), 82 deletions(-) > > diff --git a/drivers/media/usb/uvc/uvc_ctrl.c b/drivers/media/usb/uvc/uvc_ctrl.c > index 0e78233fc8a0..e1d57602bc37 100644 > --- a/drivers/media/usb/uvc/uvc_ctrl.c > +++ b/drivers/media/usb/uvc/uvc_ctrl.c > @@ -749,7 +749,8 @@ static inline void uvc_clear_bit(u8 *data, int bit) > data[bit >> 3] &= ~(1 << (bit & 7)); > } > > -/* Extract the bit string specified by mapping->offset and mapping->size > +/* > + * Extract the bit string specified by mapping->offset and mapping->size > * from the little-endian data stored at 'data' and return the result as > * a signed 32bit integer. Sign extension will be performed if the mapping > * references a signed data type. > @@ -785,7 +786,8 @@ static s32 uvc_get_le_value(struct uvc_control_mapping *mapping, > return value; > } > > -/* Set the bit string specified by mapping->offset and mapping->size > +/* > + * Set the bit string specified by mapping->offset and mapping->size > * in the little-endian data stored at 'data' to the value 'value'. > */ > static void uvc_set_le_value(struct uvc_control_mapping *mapping, > @@ -795,7 +797,8 @@ static void uvc_set_le_value(struct uvc_control_mapping *mapping, > int offset = mapping->offset; > u8 mask; > > - /* According to the v4l2 spec, writing any value to a button control > + /* > + * According to the v4l2 spec, writing any value to a button control > * should result in the action belonging to the button control being > * triggered. UVC devices however want to see a 1 written -> override > * value. > @@ -927,7 +930,8 @@ static int uvc_ctrl_populate_cache(struct uvc_video_chain *chain, > UVC_VC_EXTENSION_UNIT) > return ret; > > - /* GET_RES is mandatory for XU controls, but some > + /* > + * GET_RES is mandatory for XU controls, but some > * cameras still choke on it. Ignore errors and set the > * resolution value to zero. > */ > @@ -1522,8 +1526,10 @@ static int uvc_ctrl_add_event(struct v4l2_subscribed_event *sev, unsigned elems) > > uvc_ctrl_fill_event(handle->chain, &ev, ctrl, mapping, val, > changes); > - /* Mark the queue as active, allowing this initial > - event to be accepted. */ > + /* > + * Mark the queue as active, allowing this initial event to be > + * accepted. > + */ > sev->elems = elems; > v4l2_event_queue_fh(sev->fh, &ev); > } > @@ -1596,7 +1602,8 @@ static int uvc_ctrl_commit_entity(struct uvc_device *dev, > if (!ctrl->initialized) > continue; > > - /* Reset the loaded flag for auto-update controls that were > + /* > + * Reset the loaded flag for auto-update controls that were > * marked as loaded in uvc_ctrl_get/uvc_ctrl_set to prevent > * uvc_ctrl_get from using the cached value, and for write-only > * controls to prevent uvc_ctrl_set from setting bits not > @@ -1755,7 +1762,8 @@ int uvc_ctrl_set(struct uvc_fh *handle, > return -ERANGE; > value = mapping->menu_info[xctrl->value].value; > > - /* Valid menu indices are reported by the GET_RES request for > + /* > + * Valid menu indices are reported by the GET_RES request for > * UVC controls that support it. > */ > if (mapping->data_type == UVC_CTRL_DATA_TYPE_BITMASK && > @@ -1779,7 +1787,8 @@ int uvc_ctrl_set(struct uvc_fh *handle, > break; > } > > - /* If the mapping doesn't span the whole UVC control, the current value > + /* > + * If the mapping doesn't span the whole UVC control, the current value > * needs to be loaded from the device to perform the read-modify-write > * operation. > */ > @@ -2180,7 +2189,8 @@ static int __uvc_ctrl_add_mapping(struct uvc_video_chain *chain, > unsigned int size; > unsigned int i; > > - /* Most mappings come from static kernel data and need to be duplicated. > + /* > + * Most mappings come from static kernel data and need to be duplicated. > * Mappings that come from userspace will be unnecessarily duplicated, > * this could be optimized. > */ > @@ -2389,7 +2399,8 @@ static void uvc_ctrl_init_ctrl(struct uvc_video_chain *chain, > const struct uvc_control_mapping *mend = > mapping + ARRAY_SIZE(uvc_ctrl_mappings); > > - /* XU controls initialization requires querying the device for control > + /* > + * XU controls initialization requires querying the device for control > * information. As some buggy UVC devices will crash when queried > * repeatedly in a tight loop, delay XU controls initialization until > * first use. > diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c > index 6c86faecbea2..77ac5716f99d 100644 > --- a/drivers/media/usb/uvc/uvc_driver.c > +++ b/drivers/media/usb/uvc/uvc_driver.c > @@ -329,7 +329,8 @@ static enum v4l2_ycbcr_encoding uvc_ycbcr_enc(const u8 matrix_coefficients) > return V4L2_YCBCR_ENC_DEFAULT; /* Reserved */ > } > > -/* Simplify a fraction using a simple continued fraction decomposition. The > +/* > + * Simplify a fraction using a simple continued fraction decomposition. The > * idea here is to convert fractions such as 333333/10000000 to 1/30 using > * 32 bit arithmetic only. The algorithm is not perfect and relies upon two > * arbitrary parameters to remove non-significative terms from the simple > @@ -347,7 +348,8 @@ void uvc_simplify_fraction(u32 *numerator, u32 *denominator, > if (an == NULL) > return; > > - /* Convert the fraction to a simple continued fraction. See > + /* > + * Convert the fraction to a simple continued fraction. See > * https://mathforum.org/dr.math/faq/faq.fractions.html Not necessarily required for this patch, but this URL doesn't work any more. It redirects to https://www.nctm.org/classroomresources/ But for this patch, Reviewed-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx> > * Stop if the current term is bigger than or equal to the given > * threshold. > @@ -383,7 +385,8 @@ void uvc_simplify_fraction(u32 *numerator, u32 *denominator, > kfree(an); > } > > -/* Convert a fraction to a frame interval in 100ns multiples. The idea here is > +/* > + * Convert a fraction to a frame interval in 100ns multiples. The idea here is > * to compute numerator / denominator * 10000000 using 32 bit fixed point > * arithmetic only. > */ > @@ -396,7 +399,8 @@ u32 uvc_fraction_to_interval(u32 numerator, u32 denominator) > numerator/denominator >= ((u32)-1)/10000000) > return (u32)-1; > > - /* Divide both the denominator and the multiplier by two until > + /* > + * Divide both the denominator and the multiplier by two until > * numerator * multiplier doesn't overflow. If anyone knows a better > * algorithm please let me know. > */ > @@ -548,7 +552,8 @@ static int uvc_parse_format(struct uvc_device *dev, > > format->bpp = buffer[21]; > > - /* Some devices report a format that doesn't match what they > + /* > + * Some devices report a format that doesn't match what they > * really send. > */ > if (dev->quirks & UVC_QUIRK_FORCE_Y8) { > @@ -663,7 +668,8 @@ static int uvc_parse_format(struct uvc_device *dev, > buflen -= buffer[0]; > buffer += buffer[0]; > > - /* Parse the frame descriptors. Only uncompressed, MJPEG and frame > + /* > + * Parse the frame descriptors. Only uncompressed, MJPEG and frame > * based formats have frame descriptors. > */ > while (buflen > 2 && buffer[1] == USB_DT_CS_INTERFACE && > @@ -705,7 +711,8 @@ static int uvc_parse_format(struct uvc_device *dev, > } > frame->dwFrameInterval = *intervals; > > - /* Several UVC chipsets screw up dwMaxVideoFrameBufferSize > + /* > + * Several UVC chipsets screw up dwMaxVideoFrameBufferSize > * completely. Observed behaviours range from setting the > * value to 1.1x the actual frame size to hardwiring the > * 16 low bits to 0. This results in a higher than necessary > @@ -717,7 +724,8 @@ static int uvc_parse_format(struct uvc_device *dev, > frame->dwMaxVideoFrameBufferSize = format->bpp > * frame->wWidth * frame->wHeight / 8; > > - /* Some bogus devices report dwMinFrameInterval equal to > + /* > + * Some bogus devices report dwMinFrameInterval equal to > * dwMaxFrameInterval and have dwFrameIntervalStep set to > * zero. Setting all null intervals to 1 fixes the problem and > * some other divisions by zero that could happen. > @@ -727,7 +735,8 @@ static int uvc_parse_format(struct uvc_device *dev, > *(*intervals)++ = interval ? interval : 1; > } > > - /* Make sure that the default frame interval stays between > + /* > + * Make sure that the default frame interval stays between > * the boundaries. > */ > n -= frame->bFrameIntervalType ? 1 : 2; > @@ -819,7 +828,8 @@ static int uvc_parse_streaming(struct uvc_device *dev, > return -ENOMEM; > } > > - /* The Pico iMage webcam has its class-specific interface descriptors > + /* > + * The Pico iMage webcam has its class-specific interface descriptors > * after the endpoint descriptors. > */ > if (buflen == 0) { > @@ -918,7 +928,8 @@ static int uvc_parse_streaming(struct uvc_device *dev, > break; > > case UVC_VS_FORMAT_DV: > - /* DV format has no frame descriptor. We will create a > + /* > + * DV format has no frame descriptor. We will create a > * dummy frame descriptor with a dummy frame interval. > */ > nformats++; > @@ -1105,7 +1116,8 @@ static int uvc_parse_vendor_control(struct uvc_device *dev, > if (buffer[1] != 0x41 || buffer[2] != 0x01) > break; > > - /* Logitech implements several vendor specific functions > + /* > + * Logitech implements several vendor specific functions > * through vendor specific extension units (LXU). > * > * The LXU descriptors are similar to XU descriptors > @@ -1303,7 +1315,8 @@ static int uvc_parse_standard_control(struct uvc_device *dev, > return -EINVAL; > } > > - /* Make sure the terminal type MSB is not null, otherwise it > + /* > + * Make sure the terminal type MSB is not null, otherwise it > * could be confused with a unit. > */ > type = get_unaligned_le16(&buffer[4]); > @@ -1437,7 +1450,8 @@ static int uvc_parse_control(struct uvc_device *dev) > int buflen = alts->extralen; > int ret; > > - /* Parse the default alternate setting only, as the UVC specification > + /* > + * Parse the default alternate setting only, as the UVC specification > * defines a single alternate setting, the default alternate setting > * zero. > */ > @@ -1455,7 +1469,8 @@ static int uvc_parse_control(struct uvc_device *dev) > buffer += buffer[0]; > } > > - /* Check if the optional status endpoint is present. Built-in iSight > + /* > + * Check if the optional status endpoint is present. Built-in iSight > * webcams have an interrupt endpoint but spit proprietary data that > * don't conform to the UVC status endpoint messages. Don't try to > * handle the interrupt endpoint for those cameras. > @@ -2057,7 +2072,8 @@ static int uvc_scan_device(struct uvc_device *dev) > if (!UVC_ENTITY_IS_OTERM(term)) > continue; > > - /* If the terminal is already included in a chain, skip it. > + /* > + * If the terminal is already included in a chain, skip it. > * This can happen for chains that have multiple output > * terminals, where all output terminals beside the first one > * will be inserted in the chain in forward scans. > @@ -2309,7 +2325,8 @@ static int uvc_register_terms(struct uvc_device *dev, > if (ret < 0) > return ret; > > - /* Register a metadata node, but ignore a possible failure, > + /* > + * Register a metadata node, but ignore a possible failure, > * complete registration of video nodes anyway. > */ > uvc_meta_register(stream); > @@ -2507,7 +2524,8 @@ static void uvc_disconnect(struct usb_interface *intf) > { > struct uvc_device *dev = usb_get_intfdata(intf); > > - /* Set the USB interface data to NULL. This can be done outside the > + /* > + * Set the USB interface data to NULL. This can be done outside the > * lock, as there's no other reader. > */ > usb_set_intfdata(intf, NULL); > diff --git a/drivers/media/usb/uvc/uvc_isight.c b/drivers/media/usb/uvc/uvc_isight.c > index 2578d6ee4829..43cda5e760a3 100644 > --- a/drivers/media/usb/uvc/uvc_isight.c > +++ b/drivers/media/usb/uvc/uvc_isight.c > @@ -14,7 +14,8 @@ > > #include "uvcvideo.h" > > -/* Built-in iSight webcams implements most of UVC 1.0 except a > +/* > + * Built-in iSight webcams implements most of UVC 1.0 except a > * different packet format. Instead of sending a header at the > * beginning of each isochronous transfer payload, the webcam sends a > * single header per image (on its own in a packet), followed by > @@ -65,7 +66,8 @@ static int isight_decode(struct uvc_video_queue *queue, struct uvc_buffer *buf, > buf->state = UVC_BUF_STATE_ACTIVE; > } > > - /* Mark the buffer as done if we're at the beginning of a new frame. > + /* > + * Mark the buffer as done if we're at the beginning of a new frame. > * > * Empty buffers (bytesused == 0) don't trigger end of frame detection > * as it doesn't make sense to return an empty buffer. > @@ -75,7 +77,8 @@ static int isight_decode(struct uvc_video_queue *queue, struct uvc_buffer *buf, > return -EAGAIN; > } > > - /* Copy the video data to the buffer. Skip header packets, as they > + /* > + * Copy the video data to the buffer. Skip header packets, as they > * contain no data. > */ > if (!is_header) { > @@ -109,7 +112,9 @@ void uvc_video_decode_isight(struct uvc_urb *uvc_urb, struct uvc_buffer *buf, > urb->iso_frame_desc[i].status); > } > > - /* Decode the payload packet. > + /* > + * Decode the payload packet. > + * > * uvc_video_decode is entered twice when a frame transition > * has been detected because the end of frame can only be > * reliably detected when the first packet of the new frame > diff --git a/drivers/media/usb/uvc/uvc_queue.c b/drivers/media/usb/uvc/uvc_queue.c > index 21a907d32bb7..16fa17bbd15e 100644 > --- a/drivers/media/usb/uvc/uvc_queue.c > +++ b/drivers/media/usb/uvc/uvc_queue.c > @@ -135,7 +135,8 @@ static void uvc_buffer_queue(struct vb2_buffer *vb) > kref_init(&buf->ref); > list_add_tail(&buf->queue, &queue->irqqueue); > } else { > - /* If the device is disconnected return the buffer to userspace > + /* > + * If the device is disconnected return the buffer to userspace > * directly. The next QBUF call will fail with -ENODEV. > */ > buf->state = UVC_BUF_STATE_ERROR; > @@ -412,7 +413,8 @@ void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect) > > spin_lock_irqsave(&queue->irqlock, flags); > uvc_queue_return_buffers(queue, UVC_BUF_STATE_ERROR); > - /* This must be protected by the irqlock spinlock to avoid race > + /* > + * This must be protected by the irqlock spinlock to avoid race > * conditions between uvc_buffer_queue and the disconnection event that > * could result in an interruptible wait in uvc_dequeue_buffer. Do not > * blindly replace this logic by checking for the UVC_QUEUE_DISCONNECTED > diff --git a/drivers/media/usb/uvc/uvc_status.c b/drivers/media/usb/uvc/uvc_status.c > index 753c8226db70..7518ffce22ed 100644 > --- a/drivers/media/usb/uvc/uvc_status.c > +++ b/drivers/media/usb/uvc/uvc_status.c > @@ -202,8 +202,7 @@ static void uvc_status_complete(struct urb *urb) > case -ENOENT: /* usb_kill_urb() called. */ > case -ECONNRESET: /* usb_unlink_urb() called. */ > case -ESHUTDOWN: /* The endpoint is being disabled. */ > - case -EPROTO: /* Device is disconnected (reported by some > - * host controller). */ > + case -EPROTO: /* Device is disconnected (reported by some host controllers). */ > return; > > default: > @@ -272,7 +271,8 @@ int uvc_status_init(struct uvc_device *dev) > > pipe = usb_rcvintpipe(dev->udev, ep->desc.bEndpointAddress); > > - /* For high-speed interrupt endpoints, the bInterval value is used as > + /* > + * For high-speed interrupt endpoints, the bInterval value is used as > * an exponent of two. Some developers forgot about it. > */ > interval = ep->desc.bInterval; > diff --git a/drivers/media/usb/uvc/uvc_v4l2.c b/drivers/media/usb/uvc/uvc_v4l2.c > index 648dcd579e81..b36f9cc57cd4 100644 > --- a/drivers/media/usb/uvc/uvc_v4l2.c > +++ b/drivers/media/usb/uvc/uvc_v4l2.c > @@ -63,7 +63,8 @@ static int uvc_ioctl_ctrl_map(struct uvc_video_chain *chain, > break; > > case V4L2_CTRL_TYPE_MENU: > - /* Prevent excessive memory consumption, as well as integer > + /* > + * Prevent excessive memory consumption, as well as integer > * overflows. > */ > if (xmap->menu_count == 0 || > @@ -177,7 +178,8 @@ static int uvc_v4l2_try_format(struct uvc_streaming *stream, > fcc[0], fcc[1], fcc[2], fcc[3], > fmt->fmt.pix.width, fmt->fmt.pix.height); > > - /* Check if the hardware supports the requested format, use the default > + /* > + * Check if the hardware supports the requested format, use the default > * format otherwise. > */ > for (i = 0; i < stream->nformats; ++i) { > @@ -191,7 +193,8 @@ static int uvc_v4l2_try_format(struct uvc_streaming *stream, > fmt->fmt.pix.pixelformat = format->fcc; > } > > - /* Find the closest image size. The distance between image sizes is > + /* > + * Find the closest image size. The distance between image sizes is > * the size in pixels of the non-overlapping regions between the > * requested size and the frame-specified size. > */ > @@ -233,7 +236,8 @@ static int uvc_v4l2_try_format(struct uvc_streaming *stream, > probe->bFormatIndex = format->index; > probe->bFrameIndex = frame->bFrameIndex; > probe->dwFrameInterval = uvc_try_frame_interval(frame, interval); > - /* Some webcams stall the probe control set request when the > + /* > + * Some webcams stall the probe control set request when the > * dwMaxVideoFrameSize field is set to zero. The UVC specification > * clearly states that the field is read-only from the host, so this > * is a webcam bug. Set dwMaxVideoFrameSize to the value reported by > @@ -256,7 +260,8 @@ static int uvc_v4l2_try_format(struct uvc_streaming *stream, > if (ret < 0) > goto done; > > - /* After the probe, update fmt with the values returned from > + /* > + * After the probe, update fmt with the values returned from > * negotiation with the device. Some devices return invalid bFormatIndex > * and bFrameIndex values, in which case we can only assume they have > * accepted the requested format as-is. > diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c > index 6d3dfa4e0bb2..170a008f4006 100644 > --- a/drivers/media/usb/uvc/uvc_video.c > +++ b/drivers/media/usb/uvc/uvc_video.c > @@ -189,7 +189,8 @@ static void uvc_fixup_video_ctrl(struct uvc_streaming *stream, > ctrl->dwMaxVideoFrameSize = > frame->dwMaxVideoFrameBufferSize; > > - /* The "TOSHIBA Web Camera - 5M" Chicony device (04f2:b50b) seems to > + /* > + * The "TOSHIBA Web Camera - 5M" Chicony device (04f2:b50b) seems to > * compute the bandwidth on 16 bits and erroneously sign-extend it to > * 32 bits, resulting in a huge bandwidth value. Detect and fix that > * condition by setting the 16 MSBs to 0 when they're all equal to 1. > @@ -207,7 +208,8 @@ static void uvc_fixup_video_ctrl(struct uvc_streaming *stream, > ? ctrl->dwFrameInterval > : frame->dwFrameInterval[0]; > > - /* Compute a bandwidth estimation by multiplying the frame > + /* > + * Compute a bandwidth estimation by multiplying the frame > * size by the number of video frames per second, divide the > * result by the number of USB frames (or micro-frames for > * high-speed devices) per second and add the UVC header size > @@ -220,7 +222,8 @@ static void uvc_fixup_video_ctrl(struct uvc_streaming *stream, > bandwidth /= 8; > bandwidth += 12; > > - /* The bandwidth estimate is too low for many cameras. Don't use > + /* > + * The bandwidth estimate is too low for many cameras. Don't use > * maximum packet sizes lower than 1024 bytes to try and work > * around the problem. According to measurements done on two > * different camera models, the value is high enough to get most > @@ -267,7 +270,8 @@ static int uvc_get_video_ctrl(struct uvc_streaming *stream, > size, uvc_timeout_param); > > if ((query == UVC_GET_MIN || query == UVC_GET_MAX) && ret == 2) { > - /* Some cameras, mostly based on Bison Electronics chipsets, > + /* > + * Some cameras, mostly based on Bison Electronics chipsets, > * answer a GET_MIN or GET_MAX request with the wCompQuality > * field only. > */ > @@ -279,7 +283,8 @@ static int uvc_get_video_ctrl(struct uvc_streaming *stream, > ret = 0; > goto out; > } else if (query == UVC_GET_DEF && probe == 1 && ret != size) { > - /* Many cameras don't support the GET_DEF request on their > + /* > + * Many cameras don't support the GET_DEF request on their > * video probe control. Warn once and return, the caller will > * fall back to GET_CUR. > */ > @@ -322,7 +327,8 @@ static int uvc_get_video_ctrl(struct uvc_streaming *stream, > ctrl->bMaxVersion = 0; > } > > - /* Some broken devices return null or wrong dwMaxVideoFrameSize and > + /* > + * Some broken devices return null or wrong dwMaxVideoFrameSize and > * dwMaxPayloadTransferSize fields. Try to get the value from the > * format and frame descriptors. > */ > @@ -386,7 +392,8 @@ int uvc_probe_video(struct uvc_streaming *stream, > unsigned int i; > int ret; > > - /* Perform probing. The device should adjust the requested values > + /* > + * Perform probing. The device should adjust the requested values > * according to its capabilities. However, some devices, namely the > * first generation UVC Logitech webcams, don't implement the Video > * Probe control properly, and just return the needed bandwidth. For > @@ -493,7 +500,8 @@ uvc_video_clock_decode(struct uvc_streaming *stream, struct uvc_buffer *buf, > if (len < header_size) > return; > > - /* Extract the timestamps: > + /* > + * Extract the timestamps: > * > * - store the frame PTS in the buffer structure > * - if the SCR field is present, retrieve the host SOF counter and > @@ -506,7 +514,8 @@ uvc_video_clock_decode(struct uvc_streaming *stream, struct uvc_buffer *buf, > if (!has_scr) > return; > > - /* To limit the amount of data, drop SCRs with an SOF identical to the > + /* > + * To limit the amount of data, drop SCRs with an SOF identical to the > * previous one. > */ > dev_sof = get_unaligned_le16(&data[header_size - 2]); > @@ -518,7 +527,8 @@ uvc_video_clock_decode(struct uvc_streaming *stream, struct uvc_buffer *buf, > host_sof = usb_get_current_frame_number(stream->dev->udev); > time = uvc_video_get_time(); > > - /* The UVC specification allows device implementations that can't obtain > + /* > + * The UVC specification allows device implementations that can't obtain > * the USB frame number to keep their own frame counters as long as they > * match the size and frequency of the frame number associated with USB > * SOF tokens. The SOF values sent by such devices differ from the USB > @@ -756,7 +766,8 @@ void uvc_video_clock_update(struct uvc_streaming *stream, > y1 = NSEC_PER_SEC; > y2 = (u32)ktime_to_ns(ktime_sub(last->host_time, first->host_time)) + y1; > > - /* Interpolated and host SOF timestamps can wrap around at slightly > + /* > + * Interpolated and host SOF timestamps can wrap around at slightly > * different times. Handle this by adding or removing 2048 to or from > * the computed SOF value to keep it close to the SOF samples mean > * value. > @@ -854,7 +865,8 @@ static void uvc_video_stats_decode(struct uvc_streaming *stream, > stream->stats.frame.pts = pts; > } > > - /* Do all frames have a PTS in their first non-empty packet, or before > + /* > + * Do all frames have a PTS in their first non-empty packet, or before > * their first empty packet ? > */ > if (stream->stats.frame.size == 0) { > @@ -945,7 +957,8 @@ size_t uvc_video_stats_dump(struct uvc_streaming *stream, char *buf, > unsigned int duration; > size_t count = 0; > > - /* Compute the SCR.SOF frequency estimate. At the nominal 1kHz SOF > + /* > + * Compute the SCR.SOF frequency estimate. At the nominal 1kHz SOF > * frequency this will not overflow before more than 1h. > */ > duration = ktime_ms_delta(stream->stats.stream.stop_ts, > @@ -997,7 +1010,8 @@ static void uvc_video_stats_stop(struct uvc_streaming *stream) > * Video codecs > */ > > -/* Video payload decoding is handled by uvc_video_decode_start(), > +/* > + * Video payload decoding is handled by uvc_video_decode_start(), > * uvc_video_decode_data() and uvc_video_decode_end(). > * > * uvc_video_decode_start is called with URB data at the start of a bulk or > @@ -1037,7 +1051,8 @@ static int uvc_video_decode_start(struct uvc_streaming *stream, > { > u8 fid; > > - /* Sanity checks: > + /* > + * Sanity checks: > * - packet must be at least 2 bytes long > * - bHeaderLength value must be at least 2 bytes (see above) > * - bHeaderLength value can't be larger than the packet size. > @@ -1049,7 +1064,8 @@ static int uvc_video_decode_start(struct uvc_streaming *stream, > > fid = data[1] & UVC_STREAM_FID; > > - /* Increase the sequence number regardless of any buffer states, so > + /* > + * Increase the sequence number regardless of any buffer states, so > * that discontinuous sequence numbers always indicate lost frames. > */ > if (stream->last_fid != fid) { > @@ -1061,7 +1077,8 @@ static int uvc_video_decode_start(struct uvc_streaming *stream, > uvc_video_clock_decode(stream, buf, data, len); > uvc_video_stats_decode(stream, data, len); > > - /* Store the payload FID bit and return immediately when the buffer is > + /* > + * Store the payload FID bit and return immediately when the buffer is > * NULL. > */ > if (buf == NULL) { > @@ -1076,7 +1093,8 @@ static int uvc_video_decode_start(struct uvc_streaming *stream, > buf->error = 1; > } > > - /* Synchronize to the input stream by waiting for the FID bit to be > + /* > + * Synchronize to the input stream by waiting for the FID bit to be > * toggled when the the buffer state is not UVC_BUF_STATE_ACTIVE. > * stream->last_fid is initialized to -1, so the first isochronous > * frame will always be in sync. > @@ -1102,7 +1120,8 @@ static int uvc_video_decode_start(struct uvc_streaming *stream, > buf->state = UVC_BUF_STATE_ACTIVE; > } > > - /* Mark the buffer as done if we're at the beginning of a new frame. > + /* > + * Mark the buffer as done if we're at the beginning of a new frame. > * End of frame detection is better implemented by checking the EOF > * bit (FID bit toggling is delayed by one frame compared to the EOF > * bit), but some devices don't set the bit at end of frame (and the > @@ -1226,7 +1245,8 @@ static void uvc_video_decode_end(struct uvc_streaming *stream, > } > } > > -/* Video payload encoding is handled by uvc_video_encode_header() and > +/* > + * Video payload encoding is handled by uvc_video_encode_header() and > * uvc_video_encode_data(). Only bulk transfers are currently supported. > * > * uvc_video_encode_header is called at the start of a payload. It adds header > @@ -1450,7 +1470,8 @@ static void uvc_video_decode_bulk(struct uvc_urb *uvc_urb, > len = urb->actual_length; > stream->bulk.payload_size += len; > > - /* If the URB is the first of its payload, decode and save the > + /* > + * If the URB is the first of its payload, decode and save the > * header. > */ > if (stream->bulk.header_size == 0 && !stream->bulk.skip_payload) { > @@ -1474,7 +1495,8 @@ static void uvc_video_decode_bulk(struct uvc_urb *uvc_urb, > } > } > > - /* The buffer queue might have been cancelled while a bulk transfer > + /* > + * The buffer queue might have been cancelled while a bulk transfer > * was in progress, so we can reach here with buf equal to NULL. Make > * sure buf is never dereferenced if NULL. > */ > @@ -1483,7 +1505,8 @@ static void uvc_video_decode_bulk(struct uvc_urb *uvc_urb, > if (!stream->bulk.skip_payload && buf != NULL) > uvc_video_decode_data(uvc_urb, buf, mem, len); > > - /* Detect the payload end by a URB smaller than the maximum size (or > + /* > + * Detect the payload end by a URB smaller than the maximum size (or > * a payload size equal to the maximum) and process the header again. > */ > if (urb->actual_length < urb->transfer_buffer_length || > @@ -1686,7 +1709,8 @@ static int uvc_alloc_urb_buffers(struct uvc_streaming *stream, > if (stream->urb_size) > return stream->urb_size / psize; > > - /* Compute the number of packets. Bulk endpoints might transfer UVC > + /* > + * Compute the number of packets. Bulk endpoints might transfer UVC > * payloads across multiple URBs. > */ > npackets = DIV_ROUND_UP(size, psize); > @@ -1975,7 +1999,8 @@ static int uvc_video_start_transfer(struct uvc_streaming *stream, > } > } > > - /* The Logitech C920 temporarily forgets that it should not be adjusting > + /* > + * The Logitech C920 temporarily forgets that it should not be adjusting > * Exposure Absolute during init so restore controls to stored values. > */ > if (stream->dev->quirks & UVC_QUIRK_RESTORE_CTRLS_ON_INIT) > @@ -2018,7 +2043,8 @@ int uvc_video_resume(struct uvc_streaming *stream, int reset) > { > int ret; > > - /* If the bus has been reset on resume, set the alternate setting to 0. > + /* > + * If the bus has been reset on resume, set the alternate setting to 0. > * This should be the default value, but some devices crash or otherwise > * misbehave if they don't receive a SET_INTERFACE request before any > * other video control request. > @@ -2071,14 +2097,16 @@ int uvc_video_init(struct uvc_streaming *stream) > > atomic_set(&stream->active, 0); > > - /* Alternate setting 0 should be the default, yet the XBox Live Vision > + /* > + * Alternate setting 0 should be the default, yet the XBox Live Vision > * Cam (and possibly other devices) crash or otherwise misbehave if > * they don't receive a SET_INTERFACE request before any other video > * control request. > */ > usb_set_interface(stream->dev->udev, stream->intfnum, 0); > > - /* Set the streaming probe control with default streaming parameters > + /* > + * Set the streaming probe control with default streaming parameters > * retrieved from the device. Webcams that don't support GET_DEF > * requests on the probe control will just keep their current streaming > * parameters. > @@ -2086,7 +2114,8 @@ int uvc_video_init(struct uvc_streaming *stream) > if (uvc_get_video_ctrl(stream, probe, 1, UVC_GET_DEF) == 0) > uvc_set_video_ctrl(stream, probe, 1); > > - /* Initialize the streaming parameters with the probe control current > + /* > + * Initialize the streaming parameters with the probe control current > * value. This makes sure SET_CUR requests on the streaming commit > * control will always use values retrieved from a successful GET_CUR > * request on the probe control, as required by the UVC specification. > @@ -2095,7 +2124,8 @@ int uvc_video_init(struct uvc_streaming *stream) > if (ret < 0) > return ret; > > - /* Check if the default format descriptor exists. Use the first > + /* > + * Check if the default format descriptor exists. Use the first > * available format otherwise. > */ > for (i = stream->nformats; i > 0; --i) { > @@ -2110,7 +2140,8 @@ int uvc_video_init(struct uvc_streaming *stream) > return -EINVAL; > } > > - /* Zero bFrameIndex might be correct. Stream-based formats (including > + /* > + * Zero bFrameIndex might be correct. Stream-based formats (including > * MPEG-2 TS and DV) do not support frames but have a dummy frame > * descriptor with bFrameIndex set to zero. If the default frame > * descriptor is not found, use the first available frame. > @@ -2187,7 +2218,8 @@ void uvc_video_stop_streaming(struct uvc_streaming *stream) > if (stream->intf->num_altsetting > 1) { > usb_set_interface(stream->dev->udev, stream->intfnum, 0); > } else { > - /* UVC doesn't specify how to inform a bulk-based device > + /* > + * UVC doesn't specify how to inform a bulk-based device > * when the video stream is stopped. Windows sends a > * CLEAR_FEATURE(HALT) request to the video streaming > * bulk endpoint, mimic the same behaviour. > diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h > index c5b4febd2d94..d2eb107347ea 100644 > --- a/drivers/media/usb/uvc/uvcvideo.h > +++ b/drivers/media/usb/uvc/uvcvideo.h > @@ -225,7 +225,8 @@ struct gpio_desc; > struct sg_table; > struct uvc_device; > > -/* TODO: Put the most frequently accessed fields at the beginning of > +/* > + * TODO: Put the most frequently accessed fields at the beginning of > * structures to maximize cache efficiency. > */ > struct uvc_control_info { > @@ -270,8 +271,7 @@ struct uvc_control { > struct uvc_entity *entity; > struct uvc_control_info info; > > - u8 index; /* Used to match the uvc_control entry with a > - uvc_control_info. */ > + u8 index; /* Used to match the uvc_control entry with a uvc_control_info. */ > u8 dirty:1, > loaded:1, > modified:1, > @@ -289,7 +289,8 @@ struct uvc_format_desc { > u32 fcc; > }; > > -/* The term 'entity' refers to both UVC units and UVC terminals. > +/* > + * The term 'entity' refers to both UVC units and UVC terminals. > * > * The type field is either the terminal type (wTerminalType in the terminal > * descriptor), or the unit type (bDescriptorSubtype in the unit descriptor). > @@ -308,8 +309,7 @@ struct uvc_format_desc { > > struct uvc_entity { > struct list_head list; /* Entity as part of a UVC device. */ > - struct list_head chain; /* Entity as part of a video device > - * chain. */ > + struct list_head chain; /* Entity as part of a video device chain. */ > unsigned int flags; > > /* > @@ -591,7 +591,8 @@ struct uvc_streaming { > struct uvc_format *cur_format; > struct uvc_frame *cur_frame; > > - /* Protect access to ctrl, cur_format, cur_frame and hardware video > + /* > + * Protect access to ctrl, cur_format, cur_frame and hardware video > * probe control. > */ > struct mutex mutex; > > base-commit: f2906aa863381afb0015a9eb7fefad885d4e5a56 > -- > Regards, > > Laurent Pinchart >
