Make the bits under staging/lirc/ buildable, and add a TODO note. Signed-off-by: Jarod Wilson <jarod@xxxxxxxxxx> --- drivers/staging/Kconfig | 2 + drivers/staging/Makefile | 1 + drivers/staging/lirc/Kconfig | 110 +++++++++++++++++++++++++++++++++++++++++ drivers/staging/lirc/Makefile | 19 +++++++ drivers/staging/lirc/TODO | 8 +++ 5 files changed, 140 insertions(+), 0 deletions(-) create mode 100644 drivers/staging/lirc/Kconfig create mode 100644 drivers/staging/lirc/Makefile create mode 100644 drivers/staging/lirc/TODO diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 9fc196d..fad88fb 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -155,5 +155,7 @@ source "drivers/staging/tidspbridge/Kconfig" source "drivers/staging/quickstart/Kconfig" +source "drivers/staging/lirc/Kconfig" + endif # !STAGING_EXCLUDE_BUILD endif # STAGING diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 26942aa..27bb127 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -58,3 +58,4 @@ obj-$(CONFIG_EASYCAP) += easycap/ obj-$(CONFIG_SOLO6X10) += solo6x10/ obj-$(CONFIG_TIDSPBRIDGE) += tidspbridge/ obj-$(CONFIG_ACPI_QUICKSTART) += quickstart/ +obj-$(CONFIG_LIRC_STAGING) += lirc/ diff --git a/drivers/staging/lirc/Kconfig b/drivers/staging/lirc/Kconfig new file mode 100644 index 0000000..968c2ad --- /dev/null +++ b/drivers/staging/lirc/Kconfig @@ -0,0 +1,110 @@ +# +# LIRC driver(s) configuration +# +menuconfig LIRC_STAGING + bool "Linux Infrared Remote Control IR receiver/transmitter drivers" + help + Say Y here, and all supported Linux Infrared Remote Control IR and + RF receiver and transmitter drivers will be displayed. When paired + with a remote control and the lirc daemon, the receiver drivers + allow control of your Linux system via remote control. + +if LIRC_STAGING + +config LIRC_BT829 + tristate "BT829 based hardware" + depends on LIRC_STAGING + help + Driver for the IR interface on BT829-based hardware + +config LIRC_ENE0100 + tristate "ENE KB3924/ENE0100 CIR Port Reciever" + depends on LIRC_STAGING + help + This is a driver for CIR port handled by ENE KB3924 embedded + controller found on some notebooks. + It appears on PNP list as ENE0100. + +config LIRC_I2C + tristate "I2C Based IR Receivers" + depends on LIRC_STAGING + help + Driver for I2C-based IR receivers, such as those commonly + found onboard Hauppauge PVR-150/250/350 video capture cards + +config LIRC_IGORPLUGUSB + tristate "Igor Cesko's USB IR Receiver" + depends on LIRC_STAGING && USB + help + Driver for Igor Cesko's USB IR Receiver + +config LIRC_IMON + tristate "Legacy SoundGraph iMON Receiver and Display" + depends on LIRC_STAGING + help + Driver for the original SoundGraph iMON IR Receiver and Display + + Current generation iMON devices use the input layer imon driver. + +config LIRC_IT87 + tristate "ITE IT87XX CIR Port Receiver" + depends on LIRC_STAGING + help + Driver for the ITE IT87xx IR Receiver + +config LIRC_ITE8709 + tristate "ITE8709 CIR Port Receiver" + depends on LIRC_STAGING && PNP + help + Driver for the ITE8709 IR Receiver + +config LIRC_PARALLEL + tristate "Homebrew Parallel Port Receiver" + depends on LIRC_STAGING && !SMP + help + Driver for Homebrew Parallel Port Receivers + +config LIRC_SASEM + tristate "Sasem USB IR Remote" + depends on LIRC_STAGING + help + Driver for the Sasem OnAir Remocon-V or Dign HV5 HTPC IR/VFD Module + +config LIRC_SERIAL + tristate "Homebrew Serial Port Receiver" + depends on LIRC_STAGING + help + Driver for Homebrew Serial Port Receivers + +config LIRC_SERIAL_TRANSMITTER + bool "Serial Port Transmitter" + default y + depends on LIRC_SERIAL + help + Serial Port Transmitter support + +config LIRC_SIR + tristate "Built-in SIR IrDA port" + depends on LIRC_STAGING + help + Driver for the SIR IrDA port + +config LIRC_STREAMZAP + tristate "Streamzap PC Receiver" + depends on LIRC_STAGING + help + Driver for the Streamzap PC Receiver + +config LIRC_TTUSBIR + tristate "Technotrend USB IR Receiver" + depends on LIRC_STAGING && USB + help + Driver for the Technotrend USB IR Receiver + +config LIRC_ZILOG + tristate "Zilog/Hauppauge IR Transmitter" + depends on LIRC_STAGING + help + Driver for the Zilog/Hauppauge IR Transmitter, found on + PVR-150/500, HVR-1200/1250/1700/1800, HD-PVR and other cards +endif diff --git a/drivers/staging/lirc/Makefile b/drivers/staging/lirc/Makefile new file mode 100644 index 0000000..a019182 --- /dev/null +++ b/drivers/staging/lirc/Makefile @@ -0,0 +1,19 @@ +# Makefile for the lirc drivers. +# + +# Each configuration option enables a list of files. + +obj-$(CONFIG_LIRC_BT829) += lirc_bt829.o +obj-$(CONFIG_LIRC_ENE0100) += lirc_ene0100.o +obj-$(CONFIG_LIRC_I2C) += lirc_i2c.o +obj-$(CONFIG_LIRC_IGORPLUGUSB) += lirc_igorplugusb.o +obj-$(CONFIG_LIRC_IMON) += lirc_imon.o +obj-$(CONFIG_LIRC_IT87) += lirc_it87.o +obj-$(CONFIG_LIRC_ITE8709) += lirc_ite8709.o +obj-$(CONFIG_LIRC_PARALLEL) += lirc_parallel.o +obj-$(CONFIG_LIRC_SASEM) += lirc_sasem.o +obj-$(CONFIG_LIRC_SERIAL) += lirc_serial.o +obj-$(CONFIG_LIRC_SIR) += lirc_sir.o +obj-$(CONFIG_LIRC_STREAMZAP) += lirc_streamzap.o +obj-$(CONFIG_LIRC_TTUSBIR) += lirc_ttusbir.o +obj-$(CONFIG_LIRC_ZILOG) += lirc_zilog.o diff --git a/drivers/staging/lirc/TODO b/drivers/staging/lirc/TODO new file mode 100644 index 0000000..b6cb593 --- /dev/null +++ b/drivers/staging/lirc/TODO @@ -0,0 +1,8 @@ +- All drivers should either be ported to ir-core, or dropped entirely + (see drivers/media/IR/mceusb.c vs. lirc_mceusb.c in lirc cvs for an + example of a previously completed port). + +Please send patches to: +Jarod Wilson <jarod@xxxxxxxxxxxx> +Greg Kroah-Hartman <greg@xxxxxxxxx> + -- 1.7.1.1 -- Jarod Wilson jarod@xxxxxxxxxx -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
