Signed-off-by: Jarod Wilson <jarod@xxxxxxxxxx> --- drivers/staging/lirc/lirc_ttusbir.c | 397 +++++++++++++++++++++++++++++++++++ 1 files changed, 397 insertions(+), 0 deletions(-) create mode 100644 drivers/staging/lirc/lirc_ttusbir.c diff --git a/drivers/staging/lirc/lirc_ttusbir.c b/drivers/staging/lirc/lirc_ttusbir.c new file mode 100644 index 0000000..1f1da47 --- /dev/null +++ b/drivers/staging/lirc/lirc_ttusbir.c @@ -0,0 +1,397 @@ +/* + * lirc_ttusbir.c + * + * lirc_ttusbir - LIRC device driver for the TechnoTrend USB IR Receiver + * + * Copyright (C) 2007 Stefan Macher <st_maker-lirc@xxxxxxxx> + * + * This LIRC driver provides access to the TechnoTrend USB IR Receiver. + * The receiver delivers the IR signal as raw sampled true/false data in + * isochronous USB packets each of size 128 byte. + * Currently the driver reduces the sampling rate by factor of 8 as this + * is still more than enough to decode RC-5 - others should be analyzed. + * But the driver does not rely on RC-5 it should be able to decode every + * IR signal that is not too fast. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/usb.h> + +#include <media/lirc.h> +#include <media/lirc_dev.h> + +MODULE_DESCRIPTION("TechnoTrend USB IR device driver for LIRC"); +MODULE_AUTHOR("Stefan Macher (st_maker-lirc@xxxxxxxx)"); +MODULE_LICENSE("GPL"); + +/* #define DEBUG */ +#ifdef DEBUG +#define DPRINTK printk +#else +#define DPRINTK(_x_, a...) +#endif + +/* function declarations */ +static int probe(struct usb_interface *intf, const struct usb_device_id *id); +static void disconnect(struct usb_interface *intf); +static void urb_complete(struct urb *urb); +static int set_use_inc(void *data); +static void set_use_dec(void *data); + +static int num_urbs = 2; +module_param(num_urbs, int, S_IRUGO); +MODULE_PARM_DESC(num_urbs, + "Number of URBs in queue. Try to increase to 4 in case " + "of problems (default: 2; minimum: 2)"); + +/* table of devices that work with this driver */ +static struct usb_device_id device_id_table[] = { + /* TechnoTrend USB IR Receiver */ + { USB_DEVICE(0x0B48, 0x2003) }, + /* Terminating entry */ + { } +}; +MODULE_DEVICE_TABLE(usb, device_id_table); + +/* USB driver definition */ +static struct usb_driver usb_driver = { + .name = "TTUSBIR", + .id_table = &(device_id_table[0]), + .probe = probe, + .disconnect = disconnect, +}; + +/* USB device definition */ +struct ttusbir_device { + struct usb_driver *usb_driver; + struct usb_device *udev; + struct usb_interface *interf; + struct usb_class_driver class_driver; + unsigned int ifnum; /* Interface number to use */ + unsigned int alt_setting; /* alternate setting to use */ + unsigned int endpoint; /* Endpoint to use */ + struct urb **urb; /* num_urb URB pointers*/ + char **buffer; /* 128 byte buffer for each URB */ + struct lirc_buffer rbuf; /* Buffer towards LIRC */ + struct lirc_driver driver; + int minor; + int last_pulse; /* remembers if last received byte was pulse or space */ + int last_num; /* remembers how many last bytes appeared */ + int opened; +}; + +/*** LIRC specific functions ***/ +static int set_use_inc(void *data) +{ + int i, retval; + struct ttusbir_device *ttusbir = data; + + DPRINTK("Sending first URBs\n"); + /* @TODO Do I need to check if I am already opened */ + ttusbir->opened = 1; + + for (i = 0; i < num_urbs; i++) { + retval = usb_submit_urb(ttusbir->urb[i], GFP_KERNEL); + if (retval) { + err("%s: usb_submit_urb failed on urb %d", + __func__, i); + return retval; + } + } + return 0; +} + +static void set_use_dec(void *data) +{ + struct ttusbir_device *ttusbir = data; + + DPRINTK("Device closed\n"); + + ttusbir->opened = 0; +} + +/*** USB specific functions ***/ + +/* + * This mapping table is used to do a very simple filtering of the + * input signal. + * For a value with at least 4 bits set it returns 0xFF otherwise + * 0x00. For faster IR signals this can not be used. But for RC-5 we + * still have about 14 samples per pulse/space, i.e. we sample with 14 + * times higher frequency than the signal frequency + */ +const unsigned char map_table[] = +{ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, + 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, + 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, + 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF, + 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF, + 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, + 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, + 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF, + 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF, + 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, + 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF, + 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF, + 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0x00, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0xFF, 0xFF, + 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF +}; + +static void urb_complete(struct urb *urb) +{ + struct ttusbir_device *ttusbir; + unsigned char *buf; + int i; + int l; + + ttusbir = urb->context; + + if (!ttusbir->opened) + return; + + buf = (unsigned char *)urb->transfer_buffer; + + for (i = 0; i < 128; i++) { + /* Here we do the filtering and some kind of down sampling */ + buf[i] = ~map_table[buf[i]]; + if (ttusbir->last_pulse == buf[i]) { + if (ttusbir->last_num < PULSE_MASK/63) + ttusbir->last_num++; + /* + * else we are in a idle period and do not need to + * increment any longer + */ + } else { + l = ttusbir->last_num * 62; /* about 62 = us/byte */ + if (ttusbir->last_pulse) /* pulse or space? */ + l |= PULSE_BIT; + if (!lirc_buffer_full(&ttusbir->rbuf)) { + lirc_buffer_write(&ttusbir->rbuf, (void *)&l); + wake_up_interruptible(&ttusbir->rbuf.wait_poll); + } + ttusbir->last_num = 0; + ttusbir->last_pulse = buf[i]; + } + } + usb_submit_urb(urb, GFP_ATOMIC); /* keep data rolling :-) */ +} + +/* + * Called whenever the USB subsystem thinks we could be the right driver + * to handle this device + */ +static int probe(struct usb_interface *intf, const struct usb_device_id *id) +{ + int alt_set, endp; + int found = 0; + int i, j; + int struct_size; + struct usb_host_interface *host_interf; + struct usb_interface_descriptor *interf_desc; + struct usb_host_endpoint *host_endpoint; + struct ttusbir_device *ttusbir; + + DPRINTK("Module ttusbir probe\n"); + + /* To reduce memory fragmentation we use only one allocation */ + struct_size = sizeof(struct ttusbir_device) + + (sizeof(struct urb *) * num_urbs) + + (sizeof(char *) * num_urbs) + + (num_urbs * 128); + ttusbir = kzalloc(struct_size, GFP_KERNEL); + if (!ttusbir) + return -ENOMEM; + + ttusbir->urb = (struct urb **)((char *)ttusbir + + sizeof(struct ttusbir_device)); + ttusbir->buffer = (char **)((char *)ttusbir->urb + + (sizeof(struct urb *) * num_urbs)); + for (i = 0; i < num_urbs; i++) + ttusbir->buffer[i] = (char *)ttusbir->buffer + + (sizeof(char *)*num_urbs) + (i * 128); + + ttusbir->usb_driver = &usb_driver; + ttusbir->alt_setting = -1; + /* @TODO check if error can be returned */ + ttusbir->udev = usb_get_dev(interface_to_usbdev(intf)); + ttusbir->interf = intf; + ttusbir->last_pulse = 0x00; + ttusbir->last_num = 0; + + /* + * Now look for interface setting we can handle + * We are searching for the alt setting where end point + * 0x82 has max packet size 16 + */ + for (alt_set = 0; alt_set < intf->num_altsetting && !found; alt_set++) { + host_interf = &intf->altsetting[alt_set]; + interf_desc = &host_interf->desc; + for (endp = 0; endp < interf_desc->bNumEndpoints; endp++) { + host_endpoint = &host_interf->endpoint[endp]; + if ((host_endpoint->desc.bEndpointAddress == 0x82) && + (host_endpoint->desc.wMaxPacketSize == 0x10)) { + ttusbir->alt_setting = alt_set; + ttusbir->endpoint = endp; + found = 1; + break; + } + } + } + if (ttusbir->alt_setting != -1) + DPRINTK("alt setting: %d\n", ttusbir->alt_setting); + else { + err("Could not find alternate setting\n"); + kfree(ttusbir); + return -EINVAL; + } + + /* OK lets setup this interface setting */ + usb_set_interface(ttusbir->udev, 0, ttusbir->alt_setting); + + /* Store device info in interface structure */ + usb_set_intfdata(intf, ttusbir); + + /* Register as a LIRC driver */ + if (lirc_buffer_init(&ttusbir->rbuf, sizeof(int), 256) < 0) { + err("Could not get memory for LIRC data buffer\n"); + usb_set_intfdata(intf, NULL); + kfree(ttusbir); + return -ENOMEM; + } + strcpy(ttusbir->driver.name, "TTUSBIR"); + ttusbir->driver.minor = -1; + ttusbir->driver.code_length = 1; + ttusbir->driver.sample_rate = 0; + ttusbir->driver.data = ttusbir; + ttusbir->driver.add_to_buf = NULL; + ttusbir->driver.rbuf = &ttusbir->rbuf; + ttusbir->driver.set_use_inc = set_use_inc; + ttusbir->driver.set_use_dec = set_use_dec; + ttusbir->driver.dev = &intf->dev; + ttusbir->driver.owner = THIS_MODULE; + ttusbir->driver.features = LIRC_CAN_REC_MODE2; + ttusbir->minor = lirc_register_driver(&ttusbir->driver); + if (ttusbir->minor < 0) { + err("Error registering as LIRC driver\n"); + usb_set_intfdata(intf, NULL); + lirc_buffer_free(&ttusbir->rbuf); + kfree(ttusbir); + return -EIO; + } + + /* Allocate and setup the URB that we will use to talk to the device */ + for (i = 0; i < num_urbs; i++) { + ttusbir->urb[i] = usb_alloc_urb(8, GFP_KERNEL); + if (!ttusbir->urb[i]) { + err("Could not allocate memory for the URB\n"); + for (j = i - 1; j >= 0; j--) + kfree(ttusbir->urb[j]); + lirc_buffer_free(&ttusbir->rbuf); + lirc_unregister_driver(ttusbir->minor); + kfree(ttusbir); + usb_set_intfdata(intf, NULL); + return -ENOMEM; + } + ttusbir->urb[i]->dev = ttusbir->udev; + ttusbir->urb[i]->context = ttusbir; + ttusbir->urb[i]->pipe = usb_rcvisocpipe(ttusbir->udev, + ttusbir->endpoint); + ttusbir->urb[i]->interval = 1; + ttusbir->urb[i]->transfer_flags = URB_ISO_ASAP; + ttusbir->urb[i]->transfer_buffer = &ttusbir->buffer[i][0]; + ttusbir->urb[i]->complete = urb_complete; + ttusbir->urb[i]->number_of_packets = 8; + ttusbir->urb[i]->transfer_buffer_length = 128; + for (j = 0; j < 8; j++) { + ttusbir->urb[i]->iso_frame_desc[j].offset = j*16; + ttusbir->urb[i]->iso_frame_desc[j].length = 16; + } + } + return 0; +} + +/** + * Called when the driver is unloaded or the device is unplugged + */ +static void disconnect(struct usb_interface *intf) +{ + int i; + struct ttusbir_device *ttusbir; + + DPRINTK("Module ttusbir disconnect\n"); + + ttusbir = (struct ttusbir_device *) usb_get_intfdata(intf); + usb_set_intfdata(intf, NULL); + lirc_unregister_driver(ttusbir->minor); + DPRINTK("unregistered\n"); + + for (i = 0; i < num_urbs; i++) { + usb_kill_urb(ttusbir->urb[i]); + usb_free_urb(ttusbir->urb[i]); + } + DPRINTK("URBs killed\n"); + lirc_buffer_free(&ttusbir->rbuf); + kfree(ttusbir); +} + +static int ttusbir_init_module(void) +{ + int result; + + DPRINTK(KERN_DEBUG "Module ttusbir init\n"); + + /* register this driver with the USB subsystem */ + result = usb_register(&usb_driver); + if (result) + err("usb_register failed. Error number %d", result); + return result; +} + +static void ttusbir_exit_module(void) +{ + printk(KERN_DEBUG "Module ttusbir exit\n"); + usb_deregister(&usb_driver); +} + +module_init(ttusbir_init_module); +module_exit(ttusbir_exit_module); -- 1.7.1.1 -- Jarod Wilson jarod@xxxxxxxxxx -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html