RE: [PATCH v5 1/3] usb: gadget: add Aspeed ast2600 udc driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Gentle ping on this path, thanks.

> -----Original Message-----
> From: Neal Liu <neal_liu@xxxxxxxxxxxxxx>
> Sent: Monday, May 23, 2022 11:02 AM
> To: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>; Rob Herring
> <robh+dt@xxxxxxxxxx>; Krzysztof Kozlowski
> <krzysztof.kozlowski+dt@xxxxxxxxxx>; Joel Stanley <joel@xxxxxxxxx>; Andrew
> Jeffery <andrew@xxxxxxxx>; Felipe Balbi <balbi@xxxxxxxxxx>; Sumit Semwal
> <sumit.semwal@xxxxxxxxxx>; Christian König <christian.koenig@xxxxxxx>;
> Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>; Li Yang <leoyang.li@xxxxxxx>
> Cc: Neal Liu <neal_liu@xxxxxxxxxxxxxx>; linux-aspeed@xxxxxxxxxxxxxxxx;
> linux-usb@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx;
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> linux-media@xxxxxxxxxxxxxxx; dri-devel@xxxxxxxxxxxxxxxxxxxxx;
> linaro-mm-sig@xxxxxxxxxxxxxxxx
> Subject: [PATCH v5 1/3] usb: gadget: add Aspeed ast2600 udc driver
> 
> Aspeed udc is compliant with USB2.0, supports USB High Speed and Full Speed,
> backward compatible with USB1.1.
> 
> Supports independent DMA channel for each generic endpoint.
> Supports 32/256 stages descriptor mode for all generic endpoints.
> 
> This driver supports full functionality including single/multiple stages
> descriptor mode, and exposes 1 UDC gadget driver.
> 
> Signed-off-by: Neal Liu <neal_liu@xxxxxxxxxxxxxx>
> ---
>  MAINTAINERS                         |    7 +
>  drivers/usb/gadget/udc/Kconfig      |   13 +
>  drivers/usb/gadget/udc/Makefile     |    1 +
>  drivers/usb/gadget/udc/aspeed_udc.c | 1596
> +++++++++++++++++++++++++++
>  4 files changed, 1617 insertions(+)
>  create mode 100644 drivers/usb/gadget/udc/aspeed_udc.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index e8c52d0192a6..784d8d8e7b22 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -3109,6 +3109,13 @@ S:	Maintained
>  F:	Documentation/devicetree/bindings/media/aspeed-video.txt
>  F:	drivers/media/platform/aspeed/
> 
> +ASPEED USB UDC DRIVER
> +M:	Neal Liu <neal_liu@xxxxxxxxxxxxxx>
> +L:	linux-aspeed@xxxxxxxxxxxxxxxx (moderated for non-subscribers)
> +S:	Maintained
> +F:	Documentation/devicetree/bindings/usb/aspeed,udc.yaml
> +F:	drivers/usb/gadget/udc/aspeed_udc.c
> +
>  ASUS NOTEBOOKS AND EEEPC ACPI/WMI EXTRAS DRIVERS
>  M:	Corentin Chary <corentin.chary@xxxxxxxxx>
>  L:	acpi4asus-user@xxxxxxxxxxxxxxxxxxxxx
> diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
> index 69394dc1cdfb..03535f33511b 100644
> --- a/drivers/usb/gadget/udc/Kconfig
> +++ b/drivers/usb/gadget/udc/Kconfig
> @@ -463,6 +463,19 @@ config USB_TEGRA_XUDC
>  	 dynamically linked module called "tegra_xudc" and force all
>  	 gadget drivers to also be dynamically linked.
> 
> +config USB_ASPEED_UDC
> +	tristate "Aspeed UDC driver support"
> +	depends on ARCH_ASPEED || COMPILE_TEST
> +	depends on USB_LIBCOMPOSITE
> +	help
> +	  Enables Aspeed USB2.0 Device Controller driver for AST260x
> +	  family SoCs. The controller supports 1 control endpoint and
> +	  4 programmable endpoints.
> +
> +	  Say "y" to link the driver statically, or "m" to build a
> +	  dynamically linked module called "aspeed_udc" and force all
> +	  gadget drivers to also be dynamically linked.
> +
>  source "drivers/usb/gadget/udc/aspeed-vhub/Kconfig"
> 
>  #
> diff --git a/drivers/usb/gadget/udc/Makefile
> b/drivers/usb/gadget/udc/Makefile index a21f2224e7eb..12f9e4c9eb0c
> 100644
> --- a/drivers/usb/gadget/udc/Makefile
> +++ b/drivers/usb/gadget/udc/Makefile
> @@ -40,5 +40,6 @@ obj-$(CONFIG_USB_GR_UDC)	+= gr_udc.o
>  obj-$(CONFIG_USB_GADGET_XILINX)	+= udc-xilinx.o
>  obj-$(CONFIG_USB_SNP_UDC_PLAT) += snps_udc_plat.o
>  obj-$(CONFIG_USB_ASPEED_VHUB)	+= aspeed-vhub/
> +obj-$(CONFIG_USB_ASPEED_UDC)	+= aspeed_udc.o
>  obj-$(CONFIG_USB_BDC_UDC)	+= bdc/
>  obj-$(CONFIG_USB_MAX3420_UDC)	+= max3420_udc.o
> diff --git a/drivers/usb/gadget/udc/aspeed_udc.c
> b/drivers/usb/gadget/udc/aspeed_udc.c
> new file mode 100644
> index 000000000000..1fc15228ff15
> --- /dev/null
> +++ b/drivers/usb/gadget/udc/aspeed_udc.c
> @@ -0,0 +1,1596 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (c) 2021 Aspeed Technology Inc.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/prefetch.h>
> +#include <linux/usb/ch9.h>
> +#include <linux/usb/gadget.h>
> +#include <linux/slab.h>
> +
> +#define AST_UDC_NUM_ENDPOINTS		(1 + 4)
> +#define AST_UDC_EP0_MAX_PACKET		64	/* EP0's max packet size */
> +#define AST_UDC_EPn_MAX_PACKET		1024	/* Generic EPs max
> packet size */
> +#define AST_UDC_DESCS_COUNT		256	/* Use 256 stages descriptor
> mode (32/256) */
> +#define AST_UDC_DESC_MODE		1	/* Single/Multiple Stage(s)
> Descriptor Mode */
> +
> +#define AST_UDC_EP_DMA_SIZE		(AST_UDC_EPn_MAX_PACKET + 8 *
> AST_UDC_DESCS_COUNT)
> +
> +/*****************************
> + *                           *
> + * UDC register definitions  *
> + *                           *
> + *****************************/
> +
> +#define AST_UDC_FUNC_CTRL		0x00	/* Root Function Control &
> Status Register */
> +#define AST_UDC_CONFIG			0x04	/* Root Configuration Setting
> Register */
> +#define AST_UDC_IER			0x08	/* Interrupt Control Register */
> +#define AST_UDC_ISR			0x0C	/* Interrupt Status Register */
> +#define AST_UDC_EP_ACK_IER		0x10	/* Programmable ep Pool
> ACK Interrupt Enable Reg */
> +#define AST_UDC_EP_NAK_IER		0x14	/* Programmable ep Pool
> NAK Interrupt Enable Reg */
> +#define AST_UDC_EP_ACK_ISR		0x18	/* Programmable ep Pool
> ACK Interrupt Status Reg */
> +#define AST_UDC_EP_NAK_ISR		0x1C	/* Programmable ep Pool
> NAK Interrupt Status Reg */
> +#define AST_UDC_DEV_RESET		0x20	/* Device Controller Soft
> Reset Enable Register */
> +#define AST_UDC_STS			0x24	/* USB Status Register */
> +#define AST_VHUB_EP_DATA		0x28	/* Programmable ep Pool
> Data Toggle Value Set */
> +#define AST_VHUB_ISO_TX_FAIL		0x2C	/* Isochronous Transaction
> Fail Accumulator */
> +#define AST_UDC_EP0_CTRL		0x30	/* Endpoint 0 Control/Status
> Register */
> +#define AST_UDC_EP0_DATA_BUFF		0x34	/* Base Address of ep0
> IN/OUT Data Buffer Reg */
> +#define AST_UDC_SETUP0			0x80    /* Root Device Setup Data
> Buffer0 */
> +#define AST_UDC_SETUP1			0x84    /* Root Device Setup Data
> Buffer1 */
> +
> +
> +/* Main control reg */
> +#define USB_PHY_CLK_EN			BIT(31)
> +#define USB_FIFO_DYN_PWRD_EN		BIT(19)
> +#define USB_EP_LONG_DESC		BIT(18)
> +#define USB_BIST_TEST_PASS		BIT(13)
> +#define USB_BIST_TURN_ON		BIT(12)
> +#define USB_PHY_RESET_DIS		BIT(11)
> +#define USB_TEST_MODE(x)		((x) << 8)
> +#define USB_FORCE_TIMER_HS		BIT(7)
> +#define USB_FORCE_HS			BIT(6)
> +#define USB_REMOTE_WAKEUP_12MS		BIT(5)
> +#define USB_REMOTE_WAKEUP_EN		BIT(4)
> +#define USB_AUTO_REMOTE_WAKEUP_EN	BIT(3)
> +#define USB_STOP_CLK_IN_SUPEND		BIT(2)
> +#define USB_UPSTREAM_FS			BIT(1)
> +#define USB_UPSTREAM_EN			BIT(0)
> +
> +/* Main config reg */
> +#define UDC_CFG_SET_ADDR(x)		((x) & 0x3f)
> +#define UDC_CFG_ADDR_MASK		(0x3f)
> +
> +/* Interrupt ctrl & status reg */
> +#define UDC_IRQ_EP_POOL_NAK		BIT(17)
> +#define UDC_IRQ_EP_POOL_ACK_STALL	BIT(16)
> +#define UDC_IRQ_BUS_RESUME		BIT(8)
> +#define UDC_IRQ_BUS_SUSPEND		BIT(7)
> +#define UDC_IRQ_BUS_RESET		BIT(6)
> +#define UDC_IRQ_EP0_IN_DATA_NAK		BIT(4)
> +#define UDC_IRQ_EP0_IN_ACK_STALL	BIT(3)
> +#define UDC_IRQ_EP0_OUT_NAK		BIT(2)
> +#define UDC_IRQ_EP0_OUT_ACK_STALL	BIT(1)
> +#define UDC_IRQ_EP0_SETUP		BIT(0)
> +#define UDC_IRQ_ACK_ALL			(0x1ff)
> +
> +/* EP isr reg */
> +#define USB_EP3_ISR			BIT(3)
> +#define USB_EP2_ISR			BIT(2)
> +#define USB_EP1_ISR			BIT(1)
> +#define USB_EP0_ISR			BIT(0)
> +#define UDC_IRQ_EP_ACK_ALL		(0xf)
> +
> +/*Soft reset reg */
> +#define ROOT_UDC_SOFT_RESET		BIT(0)
> +
> +/* USB status reg */
> +#define UDC_STS_HIGHSPEED		BIT(27)
> +
> +/* Programmable EP data toggle */
> +#define EP_TOGGLE_SET_EPNUM(x)		((x) & 0x3)
> +
> +/* EP0 ctrl reg */
> +#define EP0_GET_RX_LEN(x)		((x >> 16) & 0x7f)
> +#define EP0_TX_LEN(x)			((x & 0x7f) << 8)
> +#define EP0_RX_BUFF_RDY			BIT(2)
> +#define EP0_TX_BUFF_RDY			BIT(1)
> +#define EP0_STALL			BIT(0)
> +
> +/*************************************
> + *                                   *
> + * per-endpoint register definitions *
> + *                                   *
> + *************************************/
> +
> +#define AST_UDC_EP_CONFIG		0x00	/* Endpoint Configuration
> Register */
> +#define AST_UDC_EP_DMA_CTRL		0x04	/* DMA Descriptor List
> Control/Status Register */
> +#define AST_UDC_EP_DMA_BUFF		0x08	/* DMA
> Descriptor/Buffer Base Address */
> +#define AST_UDC_EP_DMA_STS		0x0C	/* DMA Descriptor List R/W
> Pointer and Status */
> +
> +#define AST_UDC_EP_BASE			0x200
> +#define AST_UDC_EP_OFFSET		0x10
> +
> +/* EP config reg */
> +#define EP_SET_MAX_PKT(x)		((x & 0x3ff) << 16)
> +#define EP_DATA_FETCH_CTRL(x)		((x & 0x3) << 14)
> +#define EP_AUTO_DATA_DISABLE		(0x1 << 13)
> +#define EP_SET_EP_STALL			(0x1 << 12)
> +#define EP_SET_EP_NUM(x)		((x & 0xf) << 8)
> +#define EP_SET_TYPE_MASK(x)		((x) << 5)
> +#define EP_TYPE_BULK			(0x1)
> +#define EP_TYPE_INT			(0x2)
> +#define EP_TYPE_ISO			(0x3)
> +#define EP_DIR_OUT			(0x1 << 4)
> +#define EP_ALLOCATED_MASK		(0x7 << 1)
> +#define EP_ENABLE			BIT(0)
> +
> +/* EP DMA ctrl reg */
> +#define EP_DMA_CTRL_GET_PROC_STS(x)	((x >> 4) & 0xf)
> +#define EP_DMA_CTRL_STS_RX_IDLE		0x0
> +#define EP_DMA_CTRL_STS_TX_IDLE		0x8
> +#define EP_DMA_CTRL_IN_LONG_MODE	(0x1 << 3)
> +#define EP_DMA_CTRL_RESET		(0x1 << 2)
> +#define EP_DMA_SINGLE_STAGE		(0x1 << 1)
> +#define EP_DMA_DESC_MODE		(0x1 << 0)
> +
> +/* EP DMA status reg */
> +#define EP_DMA_SET_TX_SIZE(x)		((x & 0x7ff) << 16)
> +#define EP_DMA_GET_TX_SIZE(x)		(((x) >> 16) & 0x7ff)
> +#define EP_DMA_GET_RPTR(x)		(((x) >> 8) & 0xff)
> +#define EP_DMA_GET_WPTR(x)		((x) & 0xff)
> +#define EP_DMA_SINGLE_KICK		(1 << 0) /* WPTR = 1 for single mode
> */
> +
> +/* EP desc reg */
> +#define AST_EP_DMA_DESC_INTR_ENABLE	BIT(31)
> +#define AST_EP_DMA_DESC_PID_DATA0	(0 << 14)
> +#define AST_EP_DMA_DESC_PID_DATA2	BIT(14)
> +#define AST_EP_DMA_DESC_PID_DATA1	(2 << 14)
> +#define AST_EP_DMA_DESC_PID_MDATA	(3 << 14)
> +#define EP_DESC1_IN_LEN(x)		((x) & 0x1fff)
> +#define AST_EP_DMA_DESC_MAX_LEN		(7680) /* Max packet length
> for trasmit in 1 desc */
> +
> +struct ast_udc_request {
> +	struct usb_request	req;
> +	struct list_head	queue;
> +	unsigned		mapped:1;
> +	unsigned int		actual_dma_length;
> +	u32			saved_dma_wptr;
> +};
> +
> +#define to_ast_req(__req) container_of(__req, struct ast_udc_request,
> +req)
> +
> +struct ast_dma_desc {
> +	u32	des_0;
> +	u32	des_1;
> +};
> +
> +struct ast_udc_ep {
> +	struct usb_ep			ep;
> +
> +	/* Request queue */
> +	struct list_head		queue;
> +
> +	struct ast_udc_dev		*udc;
> +	void __iomem			*ep_reg;
> +	void				*epn_buf;
> +	dma_addr_t			epn_buf_dma;
> +	const struct usb_endpoint_descriptor	*desc;
> +
> +	/* DMA Descriptors */
> +	struct ast_dma_desc		*descs;
> +	dma_addr_t			descs_dma;
> +	u32				descs_wptr;
> +	u32				chunk_max;
> +
> +	bool				dir_in:1;
> +	unsigned			stopped:1;
> +	bool				desc_mode:1;
> +};
> +
> +#define to_ast_ep(__ep) container_of(__ep, struct ast_udc_ep, ep)
> +
> +struct ast_udc_dev {
> +	struct platform_device		*pdev;
> +	void __iomem			*reg;
> +	int				irq;
> +	spinlock_t			lock;
> +	struct clk			*clk;
> +	struct work_struct		wake_work;
> +
> +	/* EP0 DMA buffers allocated in one chunk */
> +	void				*ep0_buf;
> +	dma_addr_t			ep0_buf_dma;
> +	struct ast_udc_ep		ep[AST_UDC_NUM_ENDPOINTS];
> +
> +	struct usb_gadget		gadget;
> +	struct usb_gadget_driver	*driver;
> +	void __iomem			*creq;
> +	enum usb_device_state		suspended_from;
> +	int				desc_mode;
> +
> +	/* Force full speed only */
> +	bool				force_usb1:1;
> +	unsigned			is_control_tx:1;
> +	bool				wakeup_en:1;
> +};
> +
> +#define to_ast_dev(__g) container_of(__g, struct ast_udc_dev, gadget)
> +
> +static const char * const ast_ep_name[] = {
> +	"ep0", "ep1", "ep2", "ep3", "ep4"
> +};
> +
> +#ifdef AST_UDC_DEBUG_ALL
> +#define AST_UDC_DEBUG
> +#define AST_SETUP_DEBUG
> +#define AST_EP_DEBUG
> +#define AST_ISR_DEBUG
> +#endif
> +
> +#ifdef AST_SETUP_DEBUG
> +#define SETUP_DBG(u, fmt, ...)	\
> +	dev_dbg(&(u)->pdev->dev, "%s() " fmt, __func__, ##__VA_ARGS__) #else
> +#define SETUP_DBG(u, fmt, ...) #endif
> +
> +#ifdef AST_EP_DEBUG
> +#define EP_DBG(e, fmt, ...)	\
> +	dev_dbg(&(e)->udc->pdev->dev, "%s():%s " fmt, __func__,	\
> +		 (e)->ep.name, ##__VA_ARGS__)
> +#else
> +#define EP_DBG(ep, fmt, ...)	((void)(ep))
> +#endif
> +
> +#ifdef AST_UDC_DEBUG
> +#define UDC_DBG(u, fmt, ...)	\
> +	dev_dbg(&(u)->pdev->dev, "%s() " fmt, __func__, ##__VA_ARGS__) #else
> +#define UDC_DBG(u, fmt, ...) #endif
> +
> +#ifdef AST_ISR_DEBUG
> +#define ISR_DBG(u, fmt, ...)	\
> +	dev_dbg(&(u)->pdev->dev, "%s() " fmt, __func__, ##__VA_ARGS__) #else
> +#define ISR_DBG(u, fmt, ...) #endif
> +
> +/*---------------------------------------------------------------------
> +----*/
> +#define ast_udc_read(udc, offset) \
> +	readl((udc)->reg + (offset))
> +#define ast_udc_write(udc, val, offset) \
> +	writel((val), (udc)->reg + (offset))
> +
> +#define ast_ep_read(ep, reg) \
> +	readl((ep)->ep_reg + (reg))
> +#define ast_ep_write(ep, val, reg) \
> +	writel((val), (ep)->ep_reg + (reg))
> +
> +/*---------------------------------------------------------------------
> +----*/
> +
> +static void ast_udc_done(struct ast_udc_ep *ep, struct ast_udc_request *req,
> +			 int status)
> +{
> +	struct ast_udc_dev *udc = ep->udc;
> +
> +	EP_DBG(ep, "req @%p, len (%d/%d), buf:0x%x, dir:0x%x\n",
> +	       req, req->req.actual, req->req.length,
> +	       (u32)req->req.buf, ep->dir_in);
> +
> +	list_del(&req->queue);
> +
> +	if (req->req.status == -EINPROGRESS)
> +		req->req.status = status;
> +	else
> +		status = req->req.status;
> +
> +	if (status && status != -ESHUTDOWN)
> +		EP_DBG(ep, "done req:%p, status:%d\n", req, status);
> +
> +	spin_unlock(&udc->lock);
> +	usb_gadget_giveback_request(&ep->ep, &req->req);
> +	spin_lock(&udc->lock);
> +}
> +
> +static void ast_udc_nuke(struct ast_udc_ep *ep, int status) {
> +	int count = 0;
> +
> +	while (!list_empty(&ep->queue)) {
> +		struct ast_udc_request *req;
> +
> +		req = list_entry(ep->queue.next, struct ast_udc_request,
> +				 queue);
> +		ast_udc_done(ep, req, status);
> +		count++;
> +	}
> +
> +	if (count)
> +		EP_DBG(ep, "Nuked %d request(s)\n", count); }
> +
> +/*
> + * Stop activity on all endpoints.
> + * Device controller for which EP activity is to be stopped.
> + *
> + * All the endpoints are stopped and any pending transfer requests if
> +any on
> + * the endpoint are terminated.
> + */
> +static void ast_udc_stop_activity(struct ast_udc_dev *udc) {
> +	struct ast_udc_ep *ep;
> +	int i;
> +
> +	for (i = 0; i < AST_UDC_NUM_ENDPOINTS; i++) {
> +		ep = &udc->ep[i];
> +		ep->stopped = 1;
> +		ast_udc_nuke(ep, -ESHUTDOWN);
> +	}
> +}
> +
> +static int ast_udc_ep_enable(struct usb_ep *_ep,
> +			     const struct usb_endpoint_descriptor *desc) {
> +	u16 maxpacket = usb_endpoint_maxp(desc);
> +	struct ast_udc_ep *ep = to_ast_ep(_ep);
> +	struct ast_udc_dev *udc = ep->udc;
> +	u8 epnum = usb_endpoint_num(desc);
> +	unsigned long flags;
> +	u32 ep_conf = 0;
> +	u8 dir_in;
> +	u8 type;
> +
> +	if (!_ep || !ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT
> ||
> +	    maxpacket == 0 || maxpacket > ep->ep.maxpacket) {
> +		EP_DBG(ep, "Failed, invalid EP enable param\n");
> +		return -EINVAL;
> +	}
> +
> +	if (!udc->driver) {
> +		EP_DBG(ep, "bogus device state\n");
> +		return -ESHUTDOWN;
> +	}
> +
> +	EP_DBG(ep, "maxpacket:0x%x\n", maxpacket);
> +
> +	spin_lock_irqsave(&udc->lock, flags);
> +
> +	ep->desc = desc;
> +	ep->stopped = 0;
> +	ep->ep.maxpacket = maxpacket;
> +	ep->chunk_max = AST_EP_DMA_DESC_MAX_LEN;
> +
> +	if (maxpacket < AST_UDC_EPn_MAX_PACKET)
> +		ep_conf = EP_SET_MAX_PKT(maxpacket);
> +
> +	ep_conf |= EP_SET_EP_NUM(epnum);
> +
> +	type = usb_endpoint_type(desc);
> +	dir_in = usb_endpoint_dir_in(desc);
> +	ep->dir_in = dir_in;
> +	if (!ep->dir_in)
> +		ep_conf |= EP_DIR_OUT;
> +
> +	EP_DBG(ep, "type %d, dir_in %d\n", type, dir_in);
> +	switch (type) {
> +	case USB_ENDPOINT_XFER_ISOC:
> +		ep_conf |= EP_SET_TYPE_MASK(EP_TYPE_ISO);
> +		break;
> +
> +	case USB_ENDPOINT_XFER_BULK:
> +		ep_conf |= EP_SET_TYPE_MASK(EP_TYPE_BULK);
> +		break;
> +
> +	case USB_ENDPOINT_XFER_INT:
> +		ep_conf |= EP_SET_TYPE_MASK(EP_TYPE_INT);
> +		break;
> +	}
> +
> +	ep->desc_mode = udc->desc_mode && ep->descs_dma && ep->dir_in;
> +	if (ep->desc_mode) {
> +		ast_ep_write(ep, EP_DMA_CTRL_RESET, AST_UDC_EP_DMA_CTRL);
> +		ast_ep_write(ep, 0, AST_UDC_EP_DMA_STS);
> +		ast_ep_write(ep, ep->descs_dma, AST_UDC_EP_DMA_BUFF);
> +
> +		/* Enable Long Descriptor Mode */
> +		ast_ep_write(ep, EP_DMA_CTRL_IN_LONG_MODE |
> EP_DMA_DESC_MODE,
> +			     AST_UDC_EP_DMA_CTRL);
> +
> +		ep->descs_wptr = 0;
> +
> +	} else {
> +		ast_ep_write(ep, EP_DMA_CTRL_RESET, AST_UDC_EP_DMA_CTRL);
> +		ast_ep_write(ep, EP_DMA_SINGLE_STAGE,
> AST_UDC_EP_DMA_CTRL);
> +		ast_ep_write(ep, 0, AST_UDC_EP_DMA_STS);
> +	}
> +
> +	/* Cleanup data toggle just in case */
> +	ast_udc_write(udc, EP_TOGGLE_SET_EPNUM(epnum),
> AST_VHUB_EP_DATA);
> +
> +	/* Enable EP */
> +	ast_ep_write(ep, ep_conf | EP_ENABLE, AST_UDC_EP_CONFIG);
> +
> +	EP_DBG(ep, "ep_config: 0x%x\n", ast_ep_read(ep,
> AST_UDC_EP_CONFIG));
> +
> +	spin_unlock_irqrestore(&udc->lock, flags);
> +
> +	return 0;
> +}
> +
> +static int ast_udc_ep_disable(struct usb_ep *_ep) {
> +	struct ast_udc_ep *ep = to_ast_ep(_ep);
> +	struct ast_udc_dev *udc = ep->udc;
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&udc->lock, flags);
> +
> +	ep->ep.desc = NULL;
> +	ep->stopped = 1;
> +
> +	ast_udc_nuke(ep, -ESHUTDOWN);
> +	ast_ep_write(ep, 0, AST_UDC_EP_CONFIG);
> +
> +	spin_unlock_irqrestore(&udc->lock, flags);
> +
> +	return 0;
> +}
> +
> +static struct usb_request *ast_udc_ep_alloc_request(struct usb_ep *_ep,
> +						    gfp_t gfp_flags)
> +{
> +	struct ast_udc_ep *ep = to_ast_ep(_ep);
> +	struct ast_udc_request *req;
> +
> +	req = kzalloc(sizeof(struct ast_udc_request), gfp_flags);
> +	if (!req) {
> +		EP_DBG(ep, "request allocation failed\n");
> +		return NULL;
> +	}
> +
> +	INIT_LIST_HEAD(&req->queue);
> +
> +	return &req->req;
> +}
> +
> +static void ast_udc_ep_free_request(struct usb_ep *_ep,
> +				    struct usb_request *_req)
> +{
> +	struct ast_udc_request *req = to_ast_req(_req);
> +
> +	kfree(req);
> +}
> +
> +static int ast_dma_descriptor_setup(struct ast_udc_ep *ep, u32 dma_buf,
> +				    u16 tx_len, struct ast_udc_request *req) {
> +	struct ast_udc_dev *udc = ep->udc;
> +	struct device *dev = &udc->pdev->dev;
> +	u32 offset, chunk;
> +	int count, last;
> +
> +	if (!ep->descs) {
> +		dev_warn(dev, "%s: Empty DMA descs list failure\n",
> +			 ep->ep.name);
> +		return -EINVAL;
> +	}
> +
> +	chunk = tx_len;
> +	offset = count = last = 0;
> +
> +	EP_DBG(ep, "req @%p, %s:%d, %s:0x%x, %s:0x%x\n", req,
> +	       "wptr", ep->descs_wptr, "dma_buf", dma_buf,
> +	       "tx_len", tx_len);
> +
> +	/* Create Descriptor Lists */
> +	while (chunk >= 0 && !last && count < AST_UDC_DESCS_COUNT) {
> +
> +		ep->descs[ep->descs_wptr].des_0 = dma_buf + offset;
> +
> +		if (chunk <= ep->chunk_max) {
> +			ep->descs[ep->descs_wptr].des_1 = chunk;
> +			last = 1;
> +		} else {
> +			ep->descs[ep->descs_wptr].des_1 = ep->chunk_max;
> +			chunk -= ep->chunk_max;
> +		}
> +
> +		EP_DBG(ep, "descs[%d]: 0x%x 0x%x, last:%d\n",
> +		       ep->descs_wptr,
> +		       ep->descs[ep->descs_wptr].des_0,
> +		       ep->descs[ep->descs_wptr].des_1,
> +		       last);
> +
> +		if (count == 0)
> +			req->saved_dma_wptr = ep->descs_wptr;
> +
> +		ep->descs_wptr++;
> +		count++;
> +
> +		if (ep->descs_wptr >= AST_UDC_DESCS_COUNT)
> +			ep->descs_wptr = 0;
> +
> +		offset = ep->chunk_max * count;
> +	}
> +
> +	return 0;
> +}
> +
> +static void ast_udc_epn_kick(struct ast_udc_ep *ep, struct
> +ast_udc_request *req) {
> +	u32 tx_len;
> +	u32 last;
> +
> +	last = req->req.length - req->req.actual;
> +	tx_len = last > ep->ep.maxpacket ? ep->ep.maxpacket : last;
> +
> +	EP_DBG(ep, "kick req @%p, len:%d, dir:%d\n",
> +	       req, tx_len, ep->dir_in);
> +
> +	ast_ep_write(ep, req->req.dma + req->req.actual,
> AST_UDC_EP_DMA_BUFF);
> +
> +	/* Start DMA */
> +	ast_ep_write(ep, EP_DMA_SET_TX_SIZE(tx_len),
> AST_UDC_EP_DMA_STS);
> +	ast_ep_write(ep, EP_DMA_SET_TX_SIZE(tx_len) | EP_DMA_SINGLE_KICK,
> +		     AST_UDC_EP_DMA_STS);
> +}
> +
> +static void ast_udc_epn_kick_desc(struct ast_udc_ep *ep,
> +				  struct ast_udc_request *req)
> +{
> +	u32 descs_max_size;
> +	u32 tx_len;
> +	u32 last;
> +
> +	descs_max_size = AST_EP_DMA_DESC_MAX_LEN *
> AST_UDC_DESCS_COUNT;
> +
> +	last = req->req.length - req->req.actual;
> +	tx_len = last > descs_max_size ? descs_max_size : last;
> +
> +	EP_DBG(ep, "kick req @%p, %s:%d, %s:0x%x, %s:0x%x (%d/%d),
> %s:0x%x\n",
> +	       req, "tx_len", tx_len, "dir_in", ep->dir_in,
> +	       "dma", req->req.dma + req->req.actual,
> +	       req->req.actual, req->req.length,
> +	       "descs_max_size", descs_max_size);
> +
> +	if (!ast_dma_descriptor_setup(ep, req->req.dma + req->req.actual,
> +				      tx_len, req))
> +		req->actual_dma_length += tx_len;
> +
> +	/* make sure CPU done everything before triggering DMA */
> +	mb();
> +
> +	ast_ep_write(ep, ep->descs_wptr, AST_UDC_EP_DMA_STS);
> +
> +	EP_DBG(ep, "descs_wptr:%d, dstat:0x%x, dctrl:0x%x\n",
> +	       ep->descs_wptr,
> +	       ast_ep_read(ep, AST_UDC_EP_DMA_STS),
> +	       ast_ep_read(ep, AST_UDC_EP_DMA_CTRL)); }
> +
> +static void ast_udc_ep0_queue(struct ast_udc_ep *ep,
> +			      struct ast_udc_request *req)
> +{
> +	struct ast_udc_dev *udc = ep->udc;
> +	u32 tx_len;
> +	u32 last;
> +
> +	last = req->req.length - req->req.actual;
> +	tx_len = last > ep->ep.maxpacket ? ep->ep.maxpacket : last;
> +
> +	ast_udc_write(udc, req->req.dma + req->req.actual,
> +		      AST_UDC_EP0_DATA_BUFF);
> +
> +	if (ep->dir_in) {
> +		/* IN requests, send data */
> +		SETUP_DBG(udc, "IN: %s:0x%x, %s:0x%x, %s:%d (%d/%d), %s:%d\n",
> +			  "buf", (u32)req->req.buf,
> +			  "dma", req->req.dma + req->req.actual,
> +			  "tx_len", tx_len,
> +			  req->req.actual, req->req.length,
> +			  "dir_in", ep->dir_in);
> +
> +		req->req.actual += tx_len;
> +		ast_udc_write(udc, EP0_TX_LEN(tx_len), AST_UDC_EP0_CTRL);
> +		ast_udc_write(udc, EP0_TX_LEN(tx_len) | EP0_TX_BUFF_RDY,
> +			      AST_UDC_EP0_CTRL);
> +
> +	} else {
> +		/* OUT requests, receive data */
> +		SETUP_DBG(udc, "OUT: %s:%x, %s:%x, %s:(%d/%d), %s:%d\n",
> +			  "buf", (u32)req->req.buf,
> +			  "dma", req->req.dma + req->req.actual,
> +			  "len", req->req.actual, req->req.length,
> +			  "dir_in", ep->dir_in);
> +
> +		if (!req->req.length) {
> +			/* 0 len request, send tx as completion */
> +			ast_udc_write(udc, EP0_TX_BUFF_RDY, AST_UDC_EP0_CTRL);
> +			ep->dir_in = 0x1;
> +		} else
> +			ast_udc_write(udc, EP0_RX_BUFF_RDY, AST_UDC_EP0_CTRL);
> +	}
> +}
> +
> +static int ast_udc_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
> +			    gfp_t gfp_flags)
> +{
> +	struct ast_udc_request *req = to_ast_req(_req);
> +	struct ast_udc_ep *ep = to_ast_ep(_ep);
> +	struct ast_udc_dev *udc = ep->udc;
> +	struct device *dev = &udc->pdev->dev;
> +	unsigned long flags;
> +	int rc;
> +
> +	if (unlikely(!_req || !_req->complete || !_req->buf || !_ep)) {
> +		dev_warn(dev, "Invalid EP request !\n");
> +		return -EINVAL;
> +	}
> +
> +	if (ep->stopped) {
> +		dev_warn(dev, "%s is already stopped !\n", _ep->name);
> +		return -ESHUTDOWN;
> +	}
> +
> +	spin_lock_irqsave(&udc->lock, flags);
> +
> +	list_add_tail(&req->queue, &ep->queue);
> +
> +	req->req.actual = 0;
> +	req->req.status = -EINPROGRESS;
> +	req->actual_dma_length = 0;
> +
> +	rc = usb_gadget_map_request(&udc->gadget, &req->req, ep->dir_in);
> +	if (rc) {
> +		EP_DBG(ep, "Request mapping failure %d\n", rc);
> +		dev_warn(dev, "Request mapping failure %d\n", rc);
> +		goto end;
> +	}
> +
> +	EP_DBG(ep, "enqueue req @%p\n", req);
> +	EP_DBG(ep, "l=%d, dma:0x%x, zero:%d, is_in:%d\n",
> +		_req->length, _req->dma, _req->zero, ep->dir_in);
> +
> +	/* EP0 request enqueue */
> +	if (ep->ep.desc == NULL) {
> +		if ((req->req.dma % 4) != 0) {
> +			dev_warn(dev, "EP0 req dma alignment error\n");
> +			return -ESHUTDOWN;
> +		}
> +
> +		ast_udc_ep0_queue(ep, req);
> +		goto end;
> +	}
> +
> +	/* EPn request enqueue */
> +	if (list_is_singular(&ep->queue)) {
> +		if (ep->desc_mode)
> +			ast_udc_epn_kick_desc(ep, req);
> +		else
> +			ast_udc_epn_kick(ep, req);
> +	}
> +
> +end:
> +	spin_unlock_irqrestore(&udc->lock, flags);
> +
> +	return rc;
> +}
> +
> +static int ast_udc_ep_dequeue(struct usb_ep *_ep, struct usb_request
> +*_req) {
> +	struct ast_udc_ep *ep = to_ast_ep(_ep);
> +	struct ast_udc_dev *udc = ep->udc;
> +	struct ast_udc_request *req;
> +	unsigned long flags;
> +	int rc = 0;
> +
> +	spin_lock_irqsave(&udc->lock, flags);
> +
> +	/* make sure it's actually queued on this endpoint */
> +	list_for_each_entry(req, &ep->queue, queue) {
> +		if (&req->req == _req) {
> +			list_del_init(&req->queue);
> +			ast_udc_done(ep, req, -ESHUTDOWN);
> +			_req->status = -ECONNRESET;
> +			break;
> +		}
> +	}
> +
> +	/* dequeue request not found */
> +	if (&req->req != _req)
> +		rc = -EINVAL;
> +
> +	spin_unlock_irqrestore(&udc->lock, flags);
> +
> +	return rc;
> +}
> +
> +static int ast_udc_ep_set_halt(struct usb_ep *_ep, int value) {
> +	struct ast_udc_ep *ep = to_ast_ep(_ep);
> +	struct ast_udc_dev *udc = ep->udc;
> +	unsigned long flags;
> +	int epnum;
> +	u32 ctrl;
> +
> +	EP_DBG(ep, "val:%d\n", value);
> +
> +	spin_lock_irqsave(&udc->lock, flags);
> +
> +	epnum = usb_endpoint_num(ep->desc);
> +
> +	/* EP0 */
> +	if (epnum == 0) {
> +		ctrl = ast_udc_read(udc, AST_UDC_EP0_CTRL);
> +		if (value)
> +			ctrl |= EP0_STALL;
> +		else
> +			ctrl &= ~EP0_STALL;
> +
> +		ast_udc_write(udc, ctrl, AST_UDC_EP0_CTRL);
> +
> +	} else {
> +	/* EPn */
> +		ctrl = ast_udc_read(udc, AST_UDC_EP_CONFIG);
> +		if (value)
> +			ctrl |= EP_SET_EP_STALL;
> +		else
> +			ctrl &= ~EP_SET_EP_STALL;
> +
> +		ast_ep_write(ep, ctrl, AST_UDC_EP_CONFIG);
> +
> +		/* only epn is stopped and waits for clear */
> +		ep->stopped = value ? 1 : 0;
> +	}
> +
> +	spin_unlock_irqrestore(&udc->lock, flags);
> +
> +	return 0;
> +}
> +
> +static const struct usb_ep_ops ast_udc_ep_ops = {
> +	.enable		= ast_udc_ep_enable,
> +	.disable	= ast_udc_ep_disable,
> +	.alloc_request	= ast_udc_ep_alloc_request,
> +	.free_request	= ast_udc_ep_free_request,
> +	.queue		= ast_udc_ep_queue,
> +	.dequeue	= ast_udc_ep_dequeue,
> +	.set_halt	= ast_udc_ep_set_halt,
> +	/* there's only imprecise fifo status reporting */ };
> +
> +static void ast_udc_ep0_rx(struct ast_udc_dev *udc) {
> +	ast_udc_write(udc, udc->ep0_buf_dma, AST_UDC_EP0_DATA_BUFF);
> +	ast_udc_write(udc, EP0_RX_BUFF_RDY, AST_UDC_EP0_CTRL); }
> +
> +static void ast_udc_ep0_tx(struct ast_udc_dev *udc) {
> +	ast_udc_write(udc, udc->ep0_buf_dma, AST_UDC_EP0_DATA_BUFF);
> +	ast_udc_write(udc, EP0_TX_BUFF_RDY, AST_UDC_EP0_CTRL); }
> +
> +static void ast_udc_ep0_out(struct ast_udc_dev *udc) {
> +	struct device *dev = &udc->pdev->dev;
> +	struct ast_udc_ep *ep = &udc->ep[0];
> +	struct ast_udc_request *req;
> +	u16 rx_len;
> +
> +	if (list_empty(&ep->queue))
> +		return;
> +
> +	req = list_entry(ep->queue.next, struct ast_udc_request, queue);
> +
> +	rx_len = EP0_GET_RX_LEN(ast_udc_read(udc, AST_UDC_EP0_CTRL));
> +	req->req.actual += rx_len;
> +
> +	SETUP_DBG(udc, "req %p (%d/%d)\n", req,
> +		  req->req.actual, req->req.length);
> +
> +	if ((rx_len < ep->ep.maxpacket) ||
> +	    (req->req.actual == req->req.length)) {
> +		ast_udc_ep0_tx(udc);
> +		if (!ep->dir_in)
> +			ast_udc_done(ep, req, 0);
> +
> +	} else {
> +		if (rx_len > req->req.length) {
> +			// Issue Fix
> +			dev_warn(dev, "Something wrong (%d/%d)\n",
> +				 req->req.actual, req->req.length);
> +			ast_udc_ep0_tx(udc);
> +			ast_udc_done(ep, req, 0);
> +			return;
> +		}
> +
> +		ep->dir_in = 0;
> +
> +		/* More works */
> +		ast_udc_ep0_queue(ep, req);
> +	}
> +}
> +
> +static void ast_udc_ep0_in(struct ast_udc_dev *udc) {
> +	struct ast_udc_ep *ep = &udc->ep[0];
> +	struct ast_udc_request *req;
> +
> +	if (list_empty(&ep->queue)) {
> +		if (udc->is_control_tx) {
> +			ast_udc_ep0_rx(udc);
> +			udc->is_control_tx = 0;
> +		}
> +
> +		return;
> +	}
> +
> +	req = list_entry(ep->queue.next, struct ast_udc_request, queue);
> +
> +	SETUP_DBG(udc, "req %p (%d/%d)\n", req,
> +		  req->req.actual, req->req.length);
> +
> +	if (req->req.length == req->req.actual) {
> +		if (req->req.length)
> +			ast_udc_ep0_rx(udc);
> +
> +		if (ep->dir_in)
> +			ast_udc_done(ep, req, 0);
> +
> +	} else {
> +		/* More works */
> +		ast_udc_ep0_queue(ep, req);
> +	}
> +}
> +
> +static void ast_udc_epn_handle(struct ast_udc_dev *udc, u16 ep_num) {
> +	struct ast_udc_ep *ep = &udc->ep[ep_num];
> +	struct ast_udc_request *req;
> +	u16 len = 0;
> +
> +	if (list_empty(&ep->queue))
> +		return;
> +
> +	req = list_first_entry(&ep->queue, struct ast_udc_request, queue);
> +
> +	len = EP_DMA_GET_TX_SIZE(ast_ep_read(ep, AST_UDC_EP_DMA_STS));
> +	req->req.actual += len;
> +
> +	EP_DBG(ep, "req @%p, length:(%d/%d), %s:0x%x\n", req,
> +		req->req.actual, req->req.length, "len", len);
> +
> +	/* Done this request */
> +	if (req->req.length == req->req.actual) {
> +		ast_udc_done(ep, req, 0);
> +		req = list_first_entry_or_null(&ep->queue,
> +					       struct ast_udc_request,
> +					       queue);
> +
> +	} else {
> +		/* Check for short packet */
> +		if (len < ep->ep.maxpacket) {
> +			ast_udc_done(ep, req, 0);
> +			req = list_first_entry_or_null(&ep->queue,
> +						       struct ast_udc_request,
> +						       queue);
> +		}
> +	}
> +
> +	/* More requests */
> +	if (req)
> +		ast_udc_epn_kick(ep, req);
> +}
> +
> +static void ast_udc_epn_handle_desc(struct ast_udc_dev *udc, u16
> +ep_num) {
> +	struct ast_udc_ep *ep = &udc->ep[ep_num];
> +	struct device *dev = &udc->pdev->dev;
> +	struct ast_udc_request *req;
> +	u32 proc_sts, wr_ptr, rd_ptr;
> +	u32 len_in_desc, ctrl;
> +	u16 total_len = 0;
> +	int i;
> +
> +	if (list_empty(&ep->queue)) {
> +		dev_warn(dev, "%s reqest queue empty !\n", ep->ep.name);
> +		return;
> +	}
> +
> +	req = list_first_entry(&ep->queue, struct ast_udc_request, queue);
> +
> +	ctrl = ast_ep_read(ep, AST_UDC_EP_DMA_CTRL);
> +	proc_sts = EP_DMA_CTRL_GET_PROC_STS(ctrl);
> +
> +	/* Check processing status is idle */
> +	if (proc_sts != EP_DMA_CTRL_STS_RX_IDLE &&
> +	    proc_sts != EP_DMA_CTRL_STS_TX_IDLE) {
> +		dev_warn(dev, "EP DMA CTRL: 0x%x, PS:0x%x\n",
> +			 ast_ep_read(ep, AST_UDC_EP_DMA_CTRL),
> +			 proc_sts);
> +		return;
> +	}
> +
> +	ctrl = ast_ep_read(ep, AST_UDC_EP_DMA_STS);
> +	rd_ptr = EP_DMA_GET_RPTR(ctrl);
> +	wr_ptr = EP_DMA_GET_WPTR(ctrl);
> +
> +	if (rd_ptr != wr_ptr) {
> +		dev_warn(dev, "desc list is not empty ! %s:%d, %s:%d\n",
> +		"rptr", rd_ptr, "wptr", wr_ptr);
> +		return;
> +	}
> +
> +	EP_DBG(ep, "rd_ptr:%d, wr_ptr:%d\n", rd_ptr, wr_ptr);
> +	i = req->saved_dma_wptr;
> +
> +	do {
> +		len_in_desc = EP_DESC1_IN_LEN(ep->descs[i].des_1);
> +		EP_DBG(ep, "desc[%d] len: %d\n", i, len_in_desc);
> +		total_len += len_in_desc;
> +		i++;
> +		if (i >= AST_UDC_DESCS_COUNT)
> +			i = 0;
> +
> +	} while (i != wr_ptr);
> +
> +	req->req.actual += total_len;
> +
> +	EP_DBG(ep, "req @%p, length:(%d/%d), %s:0x%x\n", req,
> +		req->req.actual, req->req.length, "len", total_len);
> +
> +	/* Done this request */
> +	if (req->req.length == req->req.actual) {
> +		ast_udc_done(ep, req, 0);
> +		req = list_first_entry_or_null(&ep->queue,
> +					       struct ast_udc_request,
> +					       queue);
> +
> +	} else {
> +		/* Check for short packet */
> +		if (total_len < ep->ep.maxpacket) {
> +			ast_udc_done(ep, req, 0);
> +			req = list_first_entry_or_null(&ep->queue,
> +						       struct ast_udc_request,
> +						       queue);
> +		}
> +	}
> +
> +	/* More requests & dma descs not setup yet */
> +	if (req && (req->actual_dma_length == req->req.actual)) {
> +		EP_DBG(ep, "More requests\n");
> +		ast_udc_epn_kick_desc(ep, req);
> +	}
> +}
> +
> +static void ast_udc_ep0_data_tx(struct ast_udc_dev *udc, u8 *tx_data,
> +u32 len) {
> +	if (len) {
> +		memcpy(udc->ep0_buf, tx_data, len);
> +
> +		ast_udc_write(udc, udc->ep0_buf_dma, AST_UDC_EP0_DATA_BUFF);
> +		ast_udc_write(udc, EP0_TX_LEN(len), AST_UDC_EP0_CTRL);
> +		ast_udc_write(udc, EP0_TX_LEN(len) | EP0_TX_BUFF_RDY,
> +			      AST_UDC_EP0_CTRL);
> +		udc->is_control_tx = 1;
> +
> +	} else
> +		ast_udc_write(udc, EP0_TX_BUFF_RDY, AST_UDC_EP0_CTRL); }
> +
> +static void ast_udc_getstatus(struct ast_udc_dev *udc) {
> +	struct usb_ctrlrequest crq;
> +	struct ast_udc_ep *ep;
> +	u16 status = 0;
> +	u16 epnum = 0;
> +
> +	memcpy_fromio(&crq, udc->creq, sizeof(crq));
> +
> +	switch (crq.bRequestType & USB_RECIP_MASK) {
> +	case USB_RECIP_DEVICE:
> +		/* Get device status */
> +		status = 1 << USB_DEVICE_SELF_POWERED;
> +		break;
> +	case USB_RECIP_INTERFACE:
> +		break;
> +	case USB_RECIP_ENDPOINT:
> +		epnum = crq.wIndex & USB_ENDPOINT_NUMBER_MASK;
> +		status = udc->ep[epnum].stopped;
> +		break;
> +	default:
> +		goto stall;
> +	}
> +
> +	ep = &udc->ep[epnum];
> +	EP_DBG(ep, "status: 0x%x\n", status);
> +	ast_udc_ep0_data_tx(udc, (u8 *)&status, sizeof(status));
> +
> +	return;
> +
> +stall:
> +	EP_DBG(ep, "Can't respond request\n");
> +	ast_udc_write(udc, ast_udc_read(udc, AST_UDC_EP0_CTRL) | EP0_STALL,
> +		      AST_UDC_EP0_CTRL);
> +}
> +
> +static void ast_udc_ep0_handle_setup(struct ast_udc_dev *udc) {
> +	struct ast_udc_ep *ep = &udc->ep[0];
> +	struct ast_udc_request *req;
> +	struct usb_ctrlrequest crq;
> +	int req_num = 0;
> +	int rc = 0;
> +	u32 reg;
> +
> +	memcpy_fromio(&crq, udc->creq, sizeof(crq));
> +
> +	SETUP_DBG(udc, "SETEUP packet: %02x/%02x/%04x/%04x/%04x\n",
> +		  crq.bRequestType, crq.bRequest, le16_to_cpu(crq.wValue),
> +		  le16_to_cpu(crq.wIndex), le16_to_cpu(crq.wLength));
> +
> +	/*
> +	 * Cleanup ep0 request(s) in queue because
> +	 * there is a new control setup comes.
> +	 */
> +	list_for_each_entry(req, &udc->ep[0].queue, queue) {
> +		req_num++;
> +		EP_DBG(ep, "there is req %p in ep0 queue !\n", req);
> +	}
> +
> +	if (req_num)
> +		ast_udc_nuke(&udc->ep[0], -ETIMEDOUT);
> +
> +	udc->ep[0].dir_in = crq.bRequestType & USB_DIR_IN;
> +
> +	if ((crq.bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
> +		switch (crq.bRequest) {
> +		case USB_REQ_SET_ADDRESS:
> +			if (ast_udc_read(udc, AST_UDC_STS) & UDC_STS_HIGHSPEED)
> +				udc->gadget.speed = USB_SPEED_HIGH;
> +			else
> +				udc->gadget.speed = USB_SPEED_FULL;
> +
> +			SETUP_DBG(udc, "set addr: 0x%x\n", crq.wValue);
> +			reg = ast_udc_read(udc, AST_UDC_CONFIG);
> +			reg &= ~UDC_CFG_ADDR_MASK;
> +			reg |= UDC_CFG_SET_ADDR(crq.wValue);
> +			ast_udc_write(udc, reg, AST_UDC_CONFIG);
> +			goto req_complete;
> +
> +		case USB_REQ_CLEAR_FEATURE:
> +			SETUP_DBG(udc, "ep0: CLEAR FEATURE\n");
> +			goto req_driver;
> +
> +		case USB_REQ_SET_FEATURE:
> +			SETUP_DBG(udc, "ep0: SET FEATURE\n");
> +			goto req_driver;
> +
> +		case USB_REQ_GET_STATUS:
> +			ast_udc_getstatus(udc);
> +			return;
> +
> +		default:
> +			goto req_driver;
> +		}
> +
> +	}
> +
> +req_driver:
> +	if (udc->driver) {
> +		SETUP_DBG(udc, "Forwarding %s to gadget...\n",
> +			  udc->gadget.name);
> +
> +		spin_unlock(&udc->lock);
> +		rc = udc->driver->setup(&udc->gadget, &crq);
> +		spin_lock(&udc->lock);
> +
> +	} else {
> +		SETUP_DBG(udc, "No gadget for request !\n");
> +	}
> +
> +	if (rc >= 0)
> +		return;
> +
> +	/* Stall if gadget failed */
> +	SETUP_DBG(udc, "Stalling, rc:0x%x\n", rc);
> +	ast_udc_write(udc, ast_udc_read(udc, AST_UDC_EP0_CTRL) | EP0_STALL,
> +		      AST_UDC_EP0_CTRL);
> +	return;
> +
> +req_complete:
> +	SETUP_DBG(udc, "ep0: Sending IN status without data\n");
> +	ast_udc_write(udc, EP0_TX_BUFF_RDY, AST_UDC_EP0_CTRL); }
> +
> +static irqreturn_t ast_udc_isr(int irq, void *data) {
> +	struct ast_udc_dev *udc = (struct ast_udc_dev *)data;
> +	struct ast_udc_ep *ep;
> +	u32 isr, ep_isr;
> +	int i;
> +
> +	spin_lock(&udc->lock);
> +
> +	isr = ast_udc_read(udc, AST_UDC_ISR);
> +	if (!isr)
> +		goto done;
> +
> +	/* Ack interrupts */
> +	ast_udc_write(udc, isr, AST_UDC_ISR);
> +
> +	if (isr & UDC_IRQ_BUS_RESET) {
> +		ISR_DBG(udc, "UDC_IRQ_BUS_RESET\n");
> +		udc->gadget.speed = USB_SPEED_UNKNOWN;
> +
> +		ep = &udc->ep[1];
> +		EP_DBG(ep, "dctrl:0x%x\n",
> +		       ast_ep_read(ep, AST_UDC_EP_DMA_CTRL));
> +
> +		if (udc->driver && udc->driver->reset) {
> +			spin_unlock(&udc->lock);
> +			udc->driver->reset(&udc->gadget);
> +			spin_lock(&udc->lock);
> +		}
> +	}
> +
> +	if (isr & UDC_IRQ_BUS_SUSPEND) {
> +		ISR_DBG(udc, "UDC_IRQ_BUS_SUSPEND\n");
> +		udc->suspended_from = udc->gadget.state;
> +		usb_gadget_set_state(&udc->gadget, USB_STATE_SUSPENDED);
> +
> +		if (udc->driver && udc->driver->suspend) {
> +			spin_unlock(&udc->lock);
> +			udc->driver->suspend(&udc->gadget);
> +			spin_lock(&udc->lock);
> +		}
> +	}
> +
> +	if (isr & UDC_IRQ_BUS_RESUME) {
> +		ISR_DBG(udc, "UDC_IRQ_BUS_RESUME\n");
> +		usb_gadget_set_state(&udc->gadget, udc->suspended_from);
> +
> +		if (udc->driver && udc->driver->resume) {
> +			spin_unlock(&udc->lock);
> +			udc->driver->resume(&udc->gadget);
> +			spin_lock(&udc->lock);
> +		}
> +	}
> +
> +	if (isr & UDC_IRQ_EP0_IN_ACK_STALL) {
> +		ISR_DBG(udc, "UDC_IRQ_EP0_IN_ACK_STALL\n");
> +		ast_udc_ep0_in(udc);
> +	}
> +
> +	if (isr & UDC_IRQ_EP0_OUT_ACK_STALL) {
> +		ISR_DBG(udc, "UDC_IRQ_EP0_OUT_ACK_STALL\n");
> +		ast_udc_ep0_out(udc);
> +	}
> +
> +	if (isr & UDC_IRQ_EP0_SETUP) {
> +		ISR_DBG(udc, "UDC_IRQ_EP0_SETUP\n");
> +		ast_udc_ep0_handle_setup(udc);
> +	}
> +
> +	if (isr & UDC_IRQ_EP_POOL_ACK_STALL) {
> +		ISR_DBG(udc, "UDC_IRQ_EP_POOL_ACK_STALL\n");
> +		ep_isr = ast_udc_read(udc, AST_UDC_EP_ACK_ISR);
> +
> +		/* Ack EP interrupts */
> +		ast_udc_write(udc, ep_isr, AST_UDC_EP_ACK_ISR);
> +
> +		/* Handle each EP */
> +		for (i = 0; i < AST_UDC_NUM_ENDPOINTS - 1; i++) {
> +			if (ep_isr & (0x1 << i)) {
> +				ep = &udc->ep[i + 1];
> +				if (ep->desc_mode)
> +					ast_udc_epn_handle_desc(udc, i + 1);
> +				else
> +					ast_udc_epn_handle(udc, i + 1);
> +			}
> +		}
> +	}
> +
> +done:
> +	spin_unlock(&udc->lock);
> +	return IRQ_HANDLED;
> +}
> +
> +static int ast_udc_gadget_getframe(struct usb_gadget *gadget) {
> +	struct ast_udc_dev *udc = to_ast_dev(gadget);
> +
> +	return (ast_udc_read(udc, AST_UDC_STS) >> 16) & 0x7ff; }
> +
> +static void ast_udc_wake_work(struct work_struct *work) {
> +	struct ast_udc_dev *udc = container_of(work, struct ast_udc_dev,
> +					       wake_work);
> +	unsigned long flags;
> +	u32 ctrl;
> +
> +	spin_lock_irqsave(&udc->lock, flags);
> +
> +	UDC_DBG(udc, "Wakeup Host !\n");
> +	ctrl = ast_udc_read(udc, AST_UDC_FUNC_CTRL);
> +	ast_udc_write(udc, ctrl | USB_REMOTE_WAKEUP_EN,
> AST_UDC_FUNC_CTRL);
> +
> +	spin_unlock_irqrestore(&udc->lock, flags); }
> +
> +static void ast_udc_wakeup_all(struct ast_udc_dev *udc) {
> +	/*
> +	 * A device is trying to wake the world, because this
> +	 * can recurse into the device, we break the call chain
> +	 * using a work queue
> +	 */
> +	schedule_work(&udc->wake_work);
> +}
> +
> +static int ast_udc_wakeup(struct usb_gadget *gadget) {
> +	struct ast_udc_dev *udc = to_ast_dev(gadget);
> +	unsigned long flags;
> +	int rc = 0;
> +
> +	spin_lock_irqsave(&udc->lock, flags);
> +
> +	if (!udc->wakeup_en) {
> +		UDC_DBG(udc, "Remote Wakeup is disabled\n");
> +		rc = -EINVAL;
> +		goto err;
> +	}
> +
> +	UDC_DBG(udc, "Device initiated wakeup\n");
> +	ast_udc_wakeup_all(udc);
> +
> +err:
> +	spin_unlock_irqrestore(&udc->lock, flags);
> +	return rc;
> +}
> +
> +/*
> + * Activate/Deactivate link with host
> + */
> +static int ast_udc_pullup(struct usb_gadget *gadget, int is_on) {
> +	struct ast_udc_dev *udc = to_ast_dev(gadget);
> +	unsigned long flags;
> +	u32 ctrl;
> +
> +	spin_lock_irqsave(&udc->lock, flags);
> +
> +	UDC_DBG(udc, "is_on: %d\n", is_on);
> +	if (is_on)
> +		ctrl = ast_udc_read(udc, AST_UDC_FUNC_CTRL) |
> USB_UPSTREAM_EN;
> +	else
> +		ctrl = ast_udc_read(udc, AST_UDC_FUNC_CTRL) &
> ~USB_UPSTREAM_EN;
> +
> +	ast_udc_write(udc, ctrl, AST_UDC_FUNC_CTRL);
> +
> +	spin_unlock_irqrestore(&udc->lock, flags);
> +
> +	return 0;
> +}
> +
> +static int ast_udc_start(struct usb_gadget *gadget,
> +			 struct usb_gadget_driver *driver)
> +{
> +	struct ast_udc_dev *udc = to_ast_dev(gadget);
> +	struct ast_udc_ep *ep;
> +	unsigned long flags;
> +	int i;
> +
> +	spin_lock_irqsave(&udc->lock, flags);
> +
> +	UDC_DBG(udc, "\n");
> +	udc->driver = driver;
> +	udc->gadget.dev.of_node = udc->pdev->dev.of_node;
> +
> +	for (i = 0; i < AST_UDC_NUM_ENDPOINTS; i++) {
> +		ep = &udc->ep[i];
> +		ep->stopped = 0;
> +	}
> +
> +	spin_unlock_irqrestore(&udc->lock, flags);
> +
> +	return 0;
> +}
> +
> +static int ast_udc_stop(struct usb_gadget *gadget) {
> +	struct ast_udc_dev *udc = to_ast_dev(gadget);
> +	unsigned long flags;
> +	u32 ctrl;
> +
> +	spin_lock_irqsave(&udc->lock, flags);
> +
> +	UDC_DBG(udc, "\n");
> +	ctrl = ast_udc_read(udc, AST_UDC_FUNC_CTRL) & ~USB_UPSTREAM_EN;
> +	ast_udc_write(udc, ctrl, AST_UDC_FUNC_CTRL);
> +
> +	udc->gadget.speed = USB_SPEED_UNKNOWN;
> +	udc->driver = NULL;
> +
> +	ast_udc_stop_activity(udc);
> +	usb_gadget_set_state(&udc->gadget, USB_STATE_NOTATTACHED);
> +
> +	spin_unlock_irqrestore(&udc->lock, flags);
> +
> +	return 0;
> +}
> +
> +static const struct usb_gadget_ops ast_udc_ops = {
> +	.get_frame		= ast_udc_gadget_getframe,
> +	.wakeup			= ast_udc_wakeup,
> +	.pullup			= ast_udc_pullup,
> +	.udc_start		= ast_udc_start,
> +	.udc_stop		= ast_udc_stop,
> +};
> +
> +/*
> + * Support 1 Control Endpoint.
> + * Support multiple programmable endpoints that can be configured to
> + * Bulk IN/OUT, Interrupt IN/OUT, and Isochronous IN/OUT type endpoint.
> + */
> +static void ast_udc_init_ep(struct ast_udc_dev *udc) {
> +	struct ast_udc_ep *ep;
> +	int i;
> +
> +	for (i = 0; i < AST_UDC_NUM_ENDPOINTS; i++) {
> +		ep = &udc->ep[i];
> +		ep->ep.name = ast_ep_name[i];
> +		if (i == 0) {
> +			ep->ep.caps.type_control = true;
> +		} else {
> +			ep->ep.caps.type_iso = true;
> +			ep->ep.caps.type_bulk = true;
> +			ep->ep.caps.type_int = true;
> +		}
> +		ep->ep.caps.dir_in = true;
> +		ep->ep.caps.dir_out = true;
> +
> +		ep->ep.ops = &ast_udc_ep_ops;
> +		ep->udc = udc;
> +
> +		INIT_LIST_HEAD(&ep->queue);
> +
> +		if (i == 0) {
> +			usb_ep_set_maxpacket_limit(&ep->ep,
> +						   AST_UDC_EP0_MAX_PACKET);
> +			continue;
> +		}
> +
> +		ep->ep_reg = udc->reg + AST_UDC_EP_BASE +
> +				(AST_UDC_EP_OFFSET * (i - 1));
> +
> +		ep->epn_buf = udc->ep0_buf + (i * AST_UDC_EP_DMA_SIZE);
> +		ep->epn_buf_dma = udc->ep0_buf_dma + (i *
> AST_UDC_EP_DMA_SIZE);
> +		usb_ep_set_maxpacket_limit(&ep->ep,
> AST_UDC_EPn_MAX_PACKET);
> +
> +		ep->descs = ep->epn_buf + AST_UDC_EPn_MAX_PACKET;
> +		ep->descs_dma = ep->epn_buf_dma + AST_UDC_EPn_MAX_PACKET;
> +		ep->descs_wptr = 0;
> +
> +		list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
> +	}
> +}
> +
> +static void ast_udc_init_dev(struct ast_udc_dev *udc) {
> +	INIT_WORK(&udc->wake_work, ast_udc_wake_work); }
> +
> +static void ast_udc_init_hw(struct ast_udc_dev *udc) {
> +	u32 ctrl;
> +
> +	/* Enable PHY */
> +	ctrl = USB_PHY_CLK_EN | USB_PHY_RESET_DIS;
> +	ast_udc_write(udc, ctrl, AST_UDC_FUNC_CTRL);
> +
> +	udelay(1);
> +	ast_udc_write(udc, 0, AST_UDC_DEV_RESET);
> +
> +	/* Set descriptor ring size */
> +	if (AST_UDC_DESCS_COUNT == 256) {
> +		ctrl |= USB_EP_LONG_DESC;
> +		ast_udc_write(udc, ctrl, AST_UDC_FUNC_CTRL);
> +	}
> +
> +	/* Mask & ack all interrupts before installing the handler */
> +	ast_udc_write(udc, 0, AST_UDC_IER);
> +	ast_udc_write(udc, UDC_IRQ_ACK_ALL, AST_UDC_ISR);
> +
> +	/* Enable some interrupts */
> +	ctrl = UDC_IRQ_EP_POOL_ACK_STALL | UDC_IRQ_BUS_RESUME |
> +	       UDC_IRQ_BUS_SUSPEND | UDC_IRQ_BUS_RESET |
> +	       UDC_IRQ_EP0_IN_ACK_STALL | UDC_IRQ_EP0_OUT_ACK_STALL
> |
> +	       UDC_IRQ_EP0_SETUP;
> +	ast_udc_write(udc, ctrl, AST_UDC_IER);
> +
> +	/* Cleanup and enable ep ACK interrupts */
> +	ast_udc_write(udc, UDC_IRQ_EP_ACK_ALL, AST_UDC_EP_ACK_IER);
> +	ast_udc_write(udc, UDC_IRQ_EP_ACK_ALL, AST_UDC_EP_ACK_ISR);
> +
> +	ast_udc_write(udc, 0, AST_UDC_EP0_CTRL); }
> +
> +static int ast_udc_remove(struct platform_device *pdev) {
> +	struct ast_udc_dev *udc = platform_get_drvdata(pdev);
> +	unsigned long flags;
> +	u32 ctrl;
> +
> +	usb_del_gadget_udc(&udc->gadget);
> +	if (udc->driver)
> +		return -EBUSY;
> +
> +	spin_lock_irqsave(&udc->lock, flags);
> +
> +	/* Disable upstream port connection */
> +	ctrl = ast_udc_read(udc, AST_UDC_FUNC_CTRL) & ~USB_UPSTREAM_EN;
> +	ast_udc_write(udc, ctrl, AST_UDC_FUNC_CTRL);
> +
> +	clk_disable_unprepare(udc->clk);
> +
> +	spin_unlock_irqrestore(&udc->lock, flags);
> +
> +	if (udc->ep0_buf)
> +		dma_free_coherent(&pdev->dev,
> +				  AST_UDC_EP_DMA_SIZE * AST_UDC_NUM_ENDPOINTS,
> +				  udc->ep0_buf,
> +				  udc->ep0_buf_dma);
> +
> +	udc->ep0_buf = NULL;
> +
> +	return 0;
> +}
> +
> +static int ast_udc_probe(struct platform_device *pdev) {
> +	enum usb_device_speed max_speed;
> +	struct device *dev = &pdev->dev;
> +	struct ast_udc_dev *udc;
> +	struct resource *res;
> +	int rc;
> +
> +	udc = devm_kzalloc(&pdev->dev, sizeof(struct ast_udc_dev),
> GFP_KERNEL);
> +	if (!udc)
> +		return -ENOMEM;
> +
> +	udc->gadget.dev.parent = dev;
> +	udc->pdev = pdev;
> +	spin_lock_init(&udc->lock);
> +
> +	udc->gadget.ops = &ast_udc_ops;
> +	udc->gadget.ep0 = &udc->ep[0].ep;
> +	udc->gadget.name = "aspeed-udc";
> +	udc->gadget.dev.init_name = "gadget";
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	udc->reg = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(udc->reg)) {
> +		dev_err(&pdev->dev, "Failed to map resources\n");
> +		return PTR_ERR(udc->reg);
> +	}
> +
> +	platform_set_drvdata(pdev, udc);
> +
> +	udc->clk = devm_clk_get(&pdev->dev, NULL);
> +	if (IS_ERR(udc->clk)) {
> +		rc = PTR_ERR(udc->clk);
> +		goto err;
> +	}
> +	rc = clk_prepare_enable(udc->clk);
> +	if (rc) {
> +		dev_err(&pdev->dev, "Failed to enable clock (0x%x)\n", rc);
> +		goto err;
> +	}
> +
> +	/* Check if we need to limit the HW to USB1 */
> +	max_speed = usb_get_maximum_speed(&pdev->dev);
> +	if (max_speed != USB_SPEED_UNKNOWN && max_speed <
> USB_SPEED_HIGH)
> +		udc->force_usb1 = true;
> +
> +	/*
> +	 * Allocate DMA buffers for all EPs in one chunk
> +	 */
> +	udc->ep0_buf = dma_alloc_coherent(&pdev->dev,
> +					  AST_UDC_EP_DMA_SIZE *
> +					  AST_UDC_NUM_ENDPOINTS,
> +					  &udc->ep0_buf_dma, GFP_KERNEL);
> +
> +	udc->gadget.speed = USB_SPEED_UNKNOWN;
> +	udc->gadget.max_speed = USB_SPEED_HIGH;
> +	udc->creq = udc->reg + AST_UDC_SETUP0;
> +
> +	/*
> +	 * Support single stage mode or 32/256 stages descriptor mode.
> +	 * Set default as Descriptor Mode.
> +	 */
> +	udc->desc_mode = AST_UDC_DESC_MODE;
> +
> +	dev_info(&pdev->dev, "DMA %s\n", udc->desc_mode ?
> +		 "descriptor mode" : "single mode");
> +
> +	INIT_LIST_HEAD(&udc->gadget.ep_list);
> +	INIT_LIST_HEAD(&udc->gadget.ep0->ep_list);
> +
> +	/* Initialized udc ep */
> +	ast_udc_init_ep(udc);
> +
> +	/* Initialized udc device */
> +	ast_udc_init_dev(udc);
> +
> +	/* Initialized udc hardware */
> +	ast_udc_init_hw(udc);
> +
> +	/* Find interrupt and install handler */
> +	udc->irq = platform_get_irq(pdev, 0);
> +	if (udc->irq < 0) {
> +		dev_err(&pdev->dev, "Failed to get interrupt\n");
> +		rc = udc->irq;
> +		goto err;
> +	}
> +
> +	rc = devm_request_irq(&pdev->dev, udc->irq, ast_udc_isr, 0,
> +			      KBUILD_MODNAME, udc);
> +	if (rc) {
> +		dev_err(&pdev->dev, "Failed to request interrupt\n");
> +		goto err;
> +	}
> +
> +	rc = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
> +	if (rc) {
> +		dev_err(&pdev->dev, "Failed to add gadget udc\n");
> +		goto err;
> +	}
> +
> +	dev_info(&pdev->dev, "Initialized udc in USB%s mode\n",
> +		 udc->force_usb1 ? "1" : "2");
> +
> +	return 0;
> +
> +err:
> +	dev_err(&pdev->dev, "Failed to udc probe, rc:0x%x\n", rc);
> +	ast_udc_remove(pdev);
> +
> +	return rc;
> +}
> +
> +static const struct of_device_id ast_udc_of_dt_ids[] = {
> +	{ .compatible = "aspeed,ast2600-udc", },
> +	{}
> +};
> +
> +MODULE_DEVICE_TABLE(of, ast_udc_of_dt_ids);
> +
> +static struct platform_driver ast_udc_driver = {
> +	.probe			= ast_udc_probe,
> +	.remove			= ast_udc_remove,
> +	.driver			= {
> +		.name			= KBUILD_MODNAME,
> +		.of_match_table		= ast_udc_of_dt_ids,
> +	},
> +};
> +
> +module_platform_driver(ast_udc_driver);
> +
> +MODULE_DESCRIPTION("ASPEED UDC driver"); MODULE_AUTHOR("Neal Liu
> +<neal_liu@xxxxxxxxxxxxxx>"); MODULE_LICENSE("GPL");
> --
> 2.25.1





[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux