Re: [PATCH v2 4/4] arm64: dts: qcom: qrb5165-rb5: Enable the IMX577 on cam2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 24 May 2022 at 17:02, Bryan O'Donoghue
<bryan.odonoghue@xxxxxxxxxx> wrote:
>
> The IMX577 is on CCI1/CSI2 providing four lanes of camera data.

By default the RB5 doesn't employ the navigation mezzanine. Thus I
suggest adding a new DTS file that will include the qrb5165-rb5.dts
and extend it with camcc/camss setup.

I remember, this was discussed back and forth. I think it's time we
either create a working repo for mezzanines or push default setups
into the kernel.
I'd vote for the later option.

>
> An example media-ctl pipeline is:
>
> media-ctl --reset
> media-ctl -v -d /dev/media0 -V '"imx412 '20-001a'":0[fmt:SRGGB10/4056x3040 field:none]'
> media-ctl -V '"msm_csiphy2":0[fmt:SRGGB10/4056x3040]'
> media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4056x3040]'
> media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4056x3040]'
> media-ctl -l '"msm_csiphy2":1->"msm_csid0":0[1]'
> media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
>
> yavta -B capture-mplane -c -I -n 5 -f SRGGB10P -s 4056x3040 -F /dev/video0
>
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 60 ++++++++++++++++++++++++
>  arch/arm64/boot/dts/qcom/sm8250.dtsi     | 33 +++++++++++++
>  2 files changed, 93 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> index 0e63f707b911..756ddeb7530b 100644
> --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> @@ -1294,3 +1294,63 @@ &qup_spi0_data_clk {
>         drive-strength = <6>;
>         bias-disable;
>  };
> +
> +&camcc {
> +       status = "okay";
> +};
> +
> +&camss {
> +       status = "okay";
> +       vdda-phy-supply = <&vreg_l5a_0p88>;
> +       vdda-pll-supply = <&vreg_l9a_1p2>;
> +
> +       ports {
> +               /* The port index denotes CSIPHY id i.e. csiphy2 */
> +               port@2 {
> +                       reg = <2>;
> +                       csiphy2_ep: endpoint {
> +                               clock-lanes = <7>;
> +                               data-lanes = <0 1 2 3>;
> +                               remote-endpoint = <&imx412_ep>;
> +                       };
> +
> +               };
> +       };
> +};
> +
> +&cci1 {
> +       status = "okay";
> +};
> +
> +&cci1_i2c0 {
> +       camera@1a {
> +               /*
> +                * rb5 ships with an imx577. camx code from qcom treats imx412
> +                * and imx577 the same way. Absent better data do the same here.
> +                */
> +               compatible = "sony,imx412";
> +               reg = <0x1a>;
> +
> +               reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>;
> +               pinctrl-names = "default", "suspend";
> +               pinctrl-0 = <&cam2_default>;
> +               pinctrl-1 = <&cam2_suspend>;
> +
> +               clocks = <&camcc CAM_CC_MCLK2_CLK>;
> +               assigned-clocks = <&camcc CAM_CC_MCLK2_CLK>;
> +               assigned-clock-rates = <24000000>;
> +
> +               dovdd-supply  = <&vreg_l7f_1p8>;
> +               avdd-supply = <&vdc_5v>;
> +               dvdd-supply = <&vdc_5v>;
> +
> +               port {
> +                       imx412_ep: endpoint {
> +                               clock-lanes = <1>;
> +                               link-frequencies = /bits/ 64 <600000000>;
> +                               data-lanes = <1 2 3 4>;
> +                               remote-endpoint = <&csiphy2_ep>;
> +                       };
> +               };
> +       };
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index aa9a13364865..2b65ec2806d0 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -3788,6 +3788,39 @@ tlmm: pinctrl@f100000 {
>                         gpio-ranges = <&tlmm 0 0 181>;
>                         wakeup-parent = <&pdc>;
>
> +                       cam2_default: cam2-default {
> +                               rst {
> +                                       pins = "gpio78";
> +                                       function = "gpio";
> +                                       drive-strength = <2>;
> +                                       bias-disable;
> +                               };
> +
> +                               mclk {
> +                                       pins = "gpio96";
> +                                       function = "cam_mclk";
> +                                       drive-strength = <16>;
> +                                       bias-disable;
> +                               };
> +                       };
> +
> +                       cam2_suspend: cam2-suspend {
> +                               rst {
> +                                       pins = "gpio78";
> +                                       function = "gpio";
> +                                       drive-strength = <2>;
> +                                       bias-pull-down;
> +                                       output-low;
> +                               };
> +
> +                               mclk {
> +                                       pins = "gpio96";
> +                                       function = "cam_mclk";
> +                                       drive-strength = <2>;
> +                                       bias-disable;
> +                               };
> +                       };
> +
>                         cci0_default: cci0-default {
>                                 cci0_i2c0_default: cci0-i2c0-default {
>                                         /* SDA, SCL */
> --
> 2.36.1
>


-- 
With best wishes
Dmitry



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux