Hi,
This series fix camera probing issue of ov5695 camera driver for px30 evb.
Improve also the ov5695.c driver using using regulator_bulk_enable/regulatore_bulk_disable
function in __ov5695_power_on/__ov5695_power_off functions instead of for loop
1. use regulator_bulk_enable/regulator_bulk disable instead of for loop into
ov5695 power_on/power_off
2. max drive-strength for cif_clkout_m0
3. add mux for mipi-pdn pad
4. use rk gpio naming convention for reset-gpio of ov5695
Note:
- This series was tested on PX30_Mini_EVB_V11_20190507 board
Tommaso Merciai (4):
media: i2c: ov5695: use regulator_bulk_enable/regulator_bulk disable
instead of for loop
arm64: dts: rockchip: px30: max drive-strength for cif_clkout_m0
arm64: dts: rockchip: px30: add mux for mipi-pdn pad
arm64: dts: rockchip: px30: use rk gpio naming convention into
reset-gpios
arch/arm64/boot/dts/rockchip/px30-evb.dts | 17 +++++++++++++--
drivers/media/i2c/ov5695.c | 25 +++++++----------------
2 files changed, 22 insertions(+), 20 deletions(-)
--
2.25.1
