Hello Laurent, Am Dienstag, 10. Mai 2022, 13:58:09 CEST schrieb Laurent Pinchart: > Hello, > > This patch series prepares the imx7-media-csi for destaging by > decoupling it from the helpers shared with the i.MX6 IPUv3. > > The strategy Paul and I have followed is to import copies of helper code > and, refactor it within the imx7-media-csi driver, and repeat until no > more shared helpers are used. There is still room for refactoring and > simplification of the imx7-media-csi driver, but I believe it is now in > a state clean enough to be moved out of staging. > > The series also includes a few fixes or improvements in supported > formats that are now made possible thanks to this refactoring. See > patches 45/50 and 46/50 for details. > > The code size has grown as a result. This is partly offset by code in > the shared helpers that can be removed or simplified, but I haven't > starting working on that. The helpers are now used for the i.MX6 IPUv3 > only, so I will leave this exercise to anyone who would be interested in > destaging that driver as well. > > Some of the items in the TODO file related to the imx7-media-csi driver > have been addressed. The two remaining items are frame interval monitor > support and restricting the list of supported formats to the SoC > version. The former isn't a destaging blocker in my opinion, as the > feature can be added later if desired (and frame interval monitoring > should then be moved to the V4L2 core). I believe the latter could also > be addressed after destaging the driver, but in any case, this is a > discussion for a future destaging series (which may come as soon as this > one is accepted). > > Alexander, this also could greatly simplify your "[PATCH v3 0/8] > imx7/imx8mm media / csi patches" series. Thanks again for this patchset. This does not only simplify my series, it pretty much makes it obsolete. Only one change is still valid (rounding up width depending on bpp), but I would skip that for now. Just using my DT is enough. Nice! If you respin a v2, I'll retest again for a proper Tested-by tag. Regards, Alexander
