Hi Sakari,
I -litterally- just sent a v7 to you and Mauro (and list) to fix the
warning. Feel free to ignore it then
On Fri, May 13, 2022 at 05:15:20PM +0300, Sakari Ailus wrote:
> Hi folks,
>
> Reworked the internals a little so that no compile warnings are produced
> for intermediate patches. In the past we've allowed them but now with
> warnings considered as errors, this is a problem.
>
> The end result is unchanged. Still testing for compilation.
>
> I'm still sending this all to list as several patches got changed:
>
> media: ov5640: Associate bpp with formats
> media: ov5640: Rework CSI-2 clock tree
> media: ov5640: Split DVP and CSI-2 formats
In my v7 I have only moved ov5640_code_to_bpp() from [4/28] to
[6/28] where it is actually used.
Hence the changed patches for me are:
media: ov5640: Associate bpp with formats [4/28]
media: ov5640: Update pixel_rate and link_freq [6/28]
Are there other warnings to fix which I have missed ?
Thanks
j
>
> Hugues Fruchet (1):
> media: ov5640: Adjust vblank with s_frame_interval
>
> Jacopo Mondi (27):
> media: ov5640: Add pixel rate to modes
> media: ov5640: Re-arrange modes definition
> media: ov5640: Add ov5640_is_csi2() function
> media: ov5640: Associate bpp with formats
> media: ov5640: Add LINK_FREQ control
> media: ov5640: Update pixel_rate and link_freq
> media: ov5640: Rework CSI-2 clock tree
> media: ov5640: Rework timings programming
> media: ov5640: Fix 720x480 in RGB888 mode
> media: ov5640: Split DVP and CSI-2 timings
> media: ov5640: Provide timings accessor
> media: ov5640: Re-sort per-mode register tables
> media: ov5640: Remove duplicated mode settings
> media: ov5640: Remove ov5640_mode_init_data
> media: ov5640: Add HBLANK control
> media: ov5640: Add VBLANK control
> media: ov5640: Remove frame rate check from find_mode()
> media: ov5640: Change CSI-2 timings to comply with FPS
> media: ov5640: Implement init_cfg
> media: ov5640: Implement get_selection
> media: ov5640: Register device properties
> media: ov5640: Add RGB565_1X16 format
> media: ov5640: Add BGR888 format
> media: ov5640: Restrict sizes to mbus code
> media: ov5640: Adjust format to bpp in s_fmt
> media: ov5640: Split DVP and CSI-2 formats
> media: ov5640: Move format mux config in format
>
> drivers/media/i2c/ov5640.c | 1650 ++++++++++++++++++++++++++----------
> 1 file changed, 1188 insertions(+), 462 deletions(-)
>
> --
> 2.30.2
>
