Add device tree binding for the ST VGXY61 camera sensor, and update MAINTAINERS file. Signed-off-by: Benjamin Mugnier <benjamin.mugnier@xxxxxxxxxxx> --- .../bindings/media/i2c/st,st-vgxy61.yaml | 117 ++++++++++++++++++ MAINTAINERS | 9 ++ 2 files changed, 126 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml diff --git a/Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml b/Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml new file mode 100644 index 000000000000..4bc9a945b001 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (c) 2022 STMicroelectronics SA. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/st,st-vgxy61.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics VGxy61 HDR Global Shutter Sensor Family Device Tree Bindings + +maintainers: + - Benjamin Mugnier <benjamin.mugnier@xxxxxxxxxxx> + - Sylvain Petinot <sylvain.petinot@xxxxxxxxxxx> + +description: |- + STMicroelectronics VGxy61 family has a CSI-2 output port. CSI-2 output is a + quad lanes 800Mbps per lane. + Supported formats are RAW8, RAW10, RAW12, RAW14 and RAW16. + Following part number are supported + - VG5661 and VG6661 are 1.6 Mpx (1464 x 1104) monochrome and color sensors. + Maximum frame rate is 75 fps. + - VG5761 and VG6761 are 2.3 Mpx (1944 x 1204) monochrome and color sensors. + Maximum frame rate is 60 fps. + +properties: + compatible: + const: st,st-vgxy61 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + VCORE-supply: + description: + Sensor digital core supply. Must be 1.2 volts. + + VDDIO-supply: + description: + Sensor digital IO supply. Must be 1.8 volts. + + VANA-supply: + description: + Sensor analog supply. Must be 2.8 volts. + + reset-gpios: + description: + Reference to the GPIO connected to the reset pin, if any. + This is an active low signal to the vgxy61. + + st,strobe-gpios-polarity: + description: + Invert polarity of strobe GPIOs. + type: boolean + + st,slave-mode: + description: + If the sensor operates in slave mode + type: boolean + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: + CSI lanes to use + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + remote-endpoint: true + + required: + - data-lanes + +required: + - compatible + - clocks + - VCORE-supply + - VDDIO-supply + - VANA-supply + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + vgxy61: csi2tx@10 { + compatible = "st,st-vgxy61"; + reg = <0x10>; + clocks = <&clk_ext_camera>; + VCORE-supply = <&v1v2>; + VDDIO-supply = <&v1v8>; + VANA-supply = <&v2v8>; + reset-gpios = <&mfxgpio 18 GPIO_ACTIVE_LOW>; + port { + ep0: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&mipi_csi2_out>; + }; + }; + }; + }; +... diff --git a/MAINTAINERS b/MAINTAINERS index 40fa1955ca3f..f46f26863388 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -18662,6 +18662,15 @@ S: Maintained F: Documentation/hwmon/stpddc60.rst F: drivers/hwmon/pmbus/stpddc60.c +ST VGXY61 DRIVER +M: Benjamin Mugnier <benjamin.mugnier@xxxxxxxxxxx> +M: Sylvain Petinot <sylvain.petinot@xxxxxxxxxxx> +L: linux-media@xxxxxxxxxxxxxxx +S: Maintained +T: git git://linuxtv.org/media_tree.git +F: Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.txt +F: drivers/media/i2c/st-vgxy61.c + ST VL53L0X ToF RANGER(I2C) IIO DRIVER M: Song Qiang <songqiang1304521@xxxxxxxxx> L: linux-iio@xxxxxxxxxxxxxxx -- 2.25.1
