If an adapter is trying to claim a free logical address then it is in the 'is_configuring' state. If during that process the cable is disconnected (HPD goes low, which in turn invalidates the physical address), then cec_adap_unconfigure() is called, and that set the is_configuring boolean to false, even though the thread that's trying to claim an LA is still running. Don't touch the is_configuring bool in cec_adap_unconfigure(), it will eventually be cleared by the thread. By making that change the cec_config_log_addr() function also had to change: it was aborting if is_configuring became false (since that is what cec_adap_unconfigure() did), but that no longer works. Instead check if the physical address is invalid. That is a much more appropriate check anyway. This fixes a bug where the the adapter could be disabled even though the device was still configuring. This could cause POLL transmits to time out. Signed-off-by: Hans Verkuil <hverkuil-cisco@xxxxxxxxx> --- drivers/media/cec/core/cec-adap.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/cec/core/cec-adap.c b/drivers/media/cec/core/cec-adap.c index 004121e3582a..6c235503dd92 100644 --- a/drivers/media/cec/core/cec-adap.c +++ b/drivers/media/cec/core/cec-adap.c @@ -1275,7 +1275,7 @@ static int cec_config_log_addr(struct cec_adapter *adap, * While trying to poll the physical address was reset * and the adapter was unconfigured, so bail out. */ - if (!adap->is_configuring) + if (adap->phys_addr == CEC_PHYS_ADDR_INVALID) return -EINTR; if (err) @@ -1332,7 +1332,6 @@ static void cec_adap_unconfigure(struct cec_adapter *adap) if (!adap->needs_hpd || adap->phys_addr != CEC_PHYS_ADDR_INVALID) WARN_ON(call_op(adap, adap_log_addr, CEC_LOG_ADDR_INVALID)); adap->log_addrs.log_addr_mask = 0; - adap->is_configuring = false; adap->is_configured = false; cec_flush(adap); wake_up_interruptible(&adap->kthread_waitq); @@ -1526,9 +1525,10 @@ static int cec_config_thread_func(void *arg) for (i = 0; i < las->num_log_addrs; i++) las->log_addr[i] = CEC_LOG_ADDR_INVALID; cec_adap_unconfigure(adap); + adap->is_configuring = false; adap->kthread_config = NULL; - mutex_unlock(&adap->lock); complete(&adap->config_completion); + mutex_unlock(&adap->lock); return 0; } -- 2.34.1
