[PATCH v1] UPSTREAM: media: ov8856: skip OTP read in non-zero ACPI D state

[Jimmy Su <jimmy.su@xxxxxxxxx>]

To skip OTP read function while enable non-zero ACPI D state.
This OTP read only influences streaming output with 3280x2464 &
1640x1232 resolution.

Signed-off-by: Jimmy Su <jimmy.su@xxxxxxxxx>
---
 drivers/media/i2c/ov8856.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/media/i2c/ov8856.c b/drivers/media/i2c/ov8856.c
index 8785764b7a74..bbab0ac91edf 100644
--- a/drivers/media/i2c/ov8856.c
+++ b/drivers/media/i2c/ov8856.c
@@ -1448,6 +1448,9 @@ struct ov8856 {
 
 	/* True if the device has been identified */
 	bool identified;
+
+	/* True for skipping otp read */
+	bool acpi_skip_otp;
 };
 
 struct ov8856_lane_cfg {
@@ -1692,7 +1695,7 @@ static int ov8856_identify_module(struct ov8856 *ov8856)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(&ov8856->sd);
 	int ret;
-	u32 val;
+	u32 val, width;
 
 	if (ov8856->identified)
 		return 0;
@@ -1708,6 +1711,10 @@ static int ov8856_identify_module(struct ov8856 *ov8856)
 		return -ENXIO;
 	}
 
+	width = ov8856->cur_mode->width;
+	if (ov8856->acpi_skip_otp & (width == 3280 | width == 1640))
+		goto otp_skip;
+
 	ret = ov8856_write_reg(ov8856, OV8856_REG_MODE_SELECT,
 			       OV8856_REG_VALUE_08BIT, OV8856_MODE_STREAMING);
 	if (ret)
@@ -1750,6 +1757,11 @@ static int ov8856_identify_module(struct ov8856 *ov8856)
 
 	ov8856->identified = true;
 
+	return 0;
+
+otp_skip:
+	ov8856->identified = true;
+
 	return 0;
 }
 
@@ -2499,6 +2511,8 @@ static int ov8856_probe(struct i2c_client *client)
 			dev_err(&client->dev, "failed to find sensor: %d", ret);
 			goto probe_power_off;
 		}
+	} else {
+		ov8856->acpi_skip_otp = true;
 	}
 
 	mutex_init(&ov8856->mutex);
-- 
2.17.1