Re: [PATCH v2 1/3] media: dt-bindings: ov5675: document YAML binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 04/05/2022 15:55, Quentin Schulz wrote:
> From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxxxxx>
> 
> This patch adds documentation of device tree in YAML schema for the
> OV5675 CMOS image sensor from Omnivision.
> 
> Cc: Quentin Schulz <foss+kernel@xxxxxxxxx>

Don't Cc yourself in commits. This goes to the Git history, so
assumption is that the "other you" knows that you sent it. :)

> Signed-off-by: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxxxxx>
> ---
> 
> v2:
>  - fixed incorrect id,
>  - fixed device tree example by adding missing dt-bindings headers,
>  - fixed device tree example by using vcc_1v2 for dvdd supply, as requested
>  in datasheet,
> 
>  .../bindings/media/i2c/ovti,ov5675.yaml       | 139 ++++++++++++++++++
>  MAINTAINERS                                   |   1 +
>  2 files changed, 140 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml
> new file mode 100644
> index 000000000000..29df2f82c631
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml
> @@ -0,0 +1,139 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/ovti,ov5675.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Omnivision OV5675 CMOS Sensor Device Tree Bindings

s/Device Tree Bindings//

> +
> +maintainers:
> +  - Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxxxxx>
> +
> +description: |-
> +  The Omnivision OV5675 is a high performance, 1/5-inch, 5 megapixel, CMOS
> +  image sensor that delivers 2592x1944 at 30fps. It provides full-frame,
> +  sub-sampled, and windowed 10-bit MIPI images in various formats via the
> +  Serial Camera Control Bus (SCCB) interface. This chip is programmable
> +  through I2C and two-wire SCCB. The sensor output is available via CSI-2
> +  serial data output (up to 2-lane).
> +
> +properties:
> +  compatible:
> +    const: ovti,ov5675
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    description:
> +      Input clock for the sensor.
> +    items:
> +      - const: xvclk

Just "xv" is preferred.

> +
> +  clock-frequency:
> +    description:
> +      Frequency of the xvclk clock in Hertz.
> +
> +  dovdd-supply:
> +    description:
> +      Definition of the regulator used as interface power supply.
> +
> +  avdd-supply:
> +    description:
> +      Definition of the regulator used as analog power supply.
> +
> +  dvdd-supply:
> +    description:
> +      Definition of the regulator used as digital power supply.
> +
> +  reset-gpios:
> +    description:
> +      The phandle and specifier for the GPIO that controls sensor reset.
> +      This corresponds to the hardware pin XSHUTDOWN which is physically
> +      active low.

Needs maxItems

> +
> +  port:
> +    type: object

Open other bindings and compare how it is done there. This looks like
/schemas/graph.yaml#/$defs/port-base

> +    additionalProperties: false
> +    description:
> +      A node containing an output port node with an endpoint definition
> +      as documented in
> +      Documentation/devicetree/bindings/media/video-interfaces.txt
> +
> +    properties:
> +      endpoint:
> +        type: object

Missing ref

> +
> +        properties:
> +          data-lanes:
> +            description: |-

No need for "|-"

> +              The driver only supports 2-lane operation.

Please remove references to driver. It's not part of hardware.

> +            items:
> +              - const: 1
> +              - const: 2
> +
> +          link-frequencies:
> +            $ref: /schemas/types.yaml#/definitions/uint64-array

The ref should be already provided by video-interfaces.

> +            description:
> +              Allowed data bus frequencies. 450000000Hz is supported by the driver.

Again, skip driver reference. However you need to describe the number of
items.

>
Best regards,
Krzysztof



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux