Hi Moses,
On 16/04/2022 08:53, Moses Christopher Bollavarapu wrote:
> this driver currently uses a terminator(0x00, 0x00) to end the list
> of reg-vals instead, a struct array with ARRAY_SIZE macro can be used
> to obtain the length of the array.
Thank you for this patch and the other two twxxxx patches, but I've decided not to apply them.
It is too much code churn for too little gain. There is nothing wrong as such with a terminator,
so I think I'll just leave it as-is.
Regards,
Hans
>
> Signed-off-by: Moses Christopher Bollavarapu <mosescb.dev@xxxxxxxxx>
> ---
> drivers/media/i2c/tw9903.c | 150 ++++++++++++++++++++-----------------
> 1 file changed, 80 insertions(+), 70 deletions(-)
>
> diff --git a/drivers/media/i2c/tw9903.c b/drivers/media/i2c/tw9903.c
> index f8e3ab4909d8..b8f8240d20c1 100644
> --- a/drivers/media/i2c/tw9903.c
> +++ b/drivers/media/i2c/tw9903.c
> @@ -6,6 +6,7 @@
> #include <linux/module.h>
> #include <linux/init.h>
> #include <linux/i2c.h>
> +#include <linux/kernel.h>
> #include <linux/videodev2.h>
> #include <linux/ioctl.h>
> #include <media/v4l2-device.h>
> @@ -35,56 +36,60 @@ static inline struct tw9903 *to_state(struct v4l2_subdev *sd)
> return container_of(sd, struct tw9903, sd);
> }
>
> -static const u8 initial_registers[] = {
> - 0x02, 0x44, /* input 1, composite */
> - 0x03, 0x92, /* correct digital format */
> - 0x04, 0x00,
> - 0x05, 0x80, /* or 0x00 for PAL */
> - 0x06, 0x40, /* second internal current reference */
> - 0x07, 0x02, /* window */
> - 0x08, 0x14, /* window */
> - 0x09, 0xf0, /* window */
> - 0x0a, 0x81, /* window */
> - 0x0b, 0xd0, /* window */
> - 0x0c, 0x8c,
> - 0x0d, 0x00, /* scaling */
> - 0x0e, 0x11, /* scaling */
> - 0x0f, 0x00, /* scaling */
> - 0x10, 0x00, /* brightness */
> - 0x11, 0x60, /* contrast */
> - 0x12, 0x01, /* sharpness */
> - 0x13, 0x7f, /* U gain */
> - 0x14, 0x5a, /* V gain */
> - 0x15, 0x00, /* hue */
> - 0x16, 0xc3, /* sharpness */
> - 0x18, 0x00,
> - 0x19, 0x58, /* vbi */
> - 0x1a, 0x80,
> - 0x1c, 0x0f, /* video norm */
> - 0x1d, 0x7f, /* video norm */
> - 0x20, 0xa0, /* clamping gain (working 0x50) */
> - 0x21, 0x22,
> - 0x22, 0xf0,
> - 0x23, 0xfe,
> - 0x24, 0x3c,
> - 0x25, 0x38,
> - 0x26, 0x44,
> - 0x27, 0x20,
> - 0x28, 0x00,
> - 0x29, 0x15,
> - 0x2a, 0xa0,
> - 0x2b, 0x44,
> - 0x2c, 0x37,
> - 0x2d, 0x00,
> - 0x2e, 0xa5, /* burst PLL control (working: a9) */
> - 0x2f, 0xe0, /* 0xea is blue test frame -- 0xe0 for normal */
> - 0x31, 0x00,
> - 0x33, 0x22,
> - 0x34, 0x11,
> - 0x35, 0x35,
> - 0x3b, 0x05,
> - 0x06, 0xc0, /* reset device */
> - 0x00, 0x00, /* Terminator (reg 0x00 is read-only) */
> +struct reg_val {
> + u8 reg;
> + u8 val;
> +};
> +
> +static const struct reg_val init_regs[] = {
> + {0x02, 0x44}, /* input 1, composite */
> + {0x03, 0x92}, /* correct digital format */
> + {0x04, 0x00},
> + {0x05, 0x80}, /* or 0x00 for PAL */
> + {0x06, 0x40}, /* second internal current reference */
> + {0x07, 0x02}, /* window */
> + {0x08, 0x14}, /* window */
> + {0x09, 0xf0}, /* window */
> + {0x0a, 0x81}, /* window */
> + {0x0b, 0xd0}, /* window */
> + {0x0c, 0x8c},
> + {0x0d, 0x00}, /* scaling */
> + {0x0e, 0x11}, /* scaling */
> + {0x0f, 0x00}, /* scaling */
> + {0x10, 0x00}, /* brightness */
> + {0x11, 0x60}, /* contrast */
> + {0x12, 0x01}, /* sharpness */
> + {0x13, 0x7f}, /* U gain */
> + {0x14, 0x5a}, /* V gain */
> + {0x15, 0x00}, /* hue */
> + {0x16, 0xc3}, /* sharpness */
> + {0x18, 0x00},
> + {0x19, 0x58}, /* vbi */
> + {0x1a, 0x80},
> + {0x1c, 0x0f}, /* video norm */
> + {0x1d, 0x7f}, /* video norm */
> + {0x20, 0xa0}, /* clamping gain (working 0x50) */
> + {0x21, 0x22},
> + {0x22, 0xf0},
> + {0x23, 0xfe},
> + {0x24, 0x3c},
> + {0x25, 0x38},
> + {0x26, 0x44},
> + {0x27, 0x20},
> + {0x28, 0x00},
> + {0x29, 0x15},
> + {0x2a, 0xa0},
> + {0x2b, 0x44},
> + {0x2c, 0x37},
> + {0x2d, 0x00},
> + {0x2e, 0xa5}, /* burst PLL control (working: a9) */
> + {0x2f, 0xe0}, /* 0xea is blue test frame -- 0xe0 for normal */
> + {0x31, 0x00},
> + {0x33, 0x22},
> + {0x34, 0x11},
> + {0x35, 0x35},
> + {0x3b, 0x05},
> + {0x06, 0xc0}, /* reset device */
> };
>
> static int write_reg(struct v4l2_subdev *sd, u8 reg, u8 value)
> @@ -94,13 +99,14 @@ static int write_reg(struct v4l2_subdev *sd, u8 reg, u8 value)
> return i2c_smbus_write_byte_data(client, reg, value);
> }
>
> -static int write_regs(struct v4l2_subdev *sd, const u8 *regs)
> +static int write_regs(struct v4l2_subdev *sd,
> + const struct reg_val *rv, int len)
> {
> - int i;
> -
> - for (i = 0; regs[i] != 0x00; i += 2)
> - if (write_reg(sd, regs[i], regs[i + 1]) < 0)
> + while (--len >= 0) {
> + if (write_reg(sd, rv->reg, rv->val) < 0)
> return -1;
> + rv++;
> + }
> return 0;
> }
>
> @@ -115,24 +121,28 @@ static int tw9903_s_std(struct v4l2_subdev *sd, v4l2_std_id norm)
> {
> struct tw9903 *dec = to_state(sd);
> bool is_60hz = norm & V4L2_STD_525_60;
> - static const u8 config_60hz[] = {
> - 0x05, 0x80,
> - 0x07, 0x02,
> - 0x08, 0x14,
> - 0x09, 0xf0,
> - 0, 0,
> + int ret;
> +
> + static const struct reg_val config_60hz[] = {
> + {0x05, 0x80},
> + {0x07, 0x02},
> + {0x08, 0x14},
> + {0x09, 0xf0},
> };
> - static const u8 config_50hz[] = {
> - 0x05, 0x00,
> - 0x07, 0x12,
> - 0x08, 0x18,
> - 0x09, 0x20,
> - 0, 0,
> + static const struct reg_val config_50hz[] = {
> + {0x05, 0x00},
> + {0x07, 0x12},
> + {0x08, 0x18},
> + {0x09, 0x20},
> };
>
> - write_regs(sd, is_60hz ? config_60hz : config_50hz);
> + if (is_60hz)
> + ret = write_regs(sd, config_60hz, ARRAY_SIZE(config_60hz));
> + else
> + ret = write_regs(sd, config_50hz, ARRAY_SIZE(config_50hz));
> +
> dec->norm = norm;
> - return 0;
> + return ret;
> }
>
>
> @@ -227,7 +237,7 @@ static int tw9903_probe(struct i2c_client *client,
> /* Initialize tw9903 */
> dec->norm = V4L2_STD_NTSC;
>
> - if (write_regs(sd, initial_registers) < 0) {
> + if (write_regs(sd, init_regs, ARRAY_SIZE(init_regs)) < 0) {
> v4l2_err(client, "error initializing TW9903\n");
> return -EINVAL;
> }
