Hi Benjamin, On 04/04/2022 11:01, Benjamin Gaignard wrote: > P010 is a YUV format with 10-bits per pixel with interleaved UV. > > Signed-off-by: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx> > Acked-by: Nicolas Dufresne <nicolas.dufresne@xxxxxxxxxxxxx> > --- > Note that P010 is already known in GStreamer, only the mapping with > v4l2 pixel format is missing. > > This patch has been acked in this series but never merged: > https://patchwork.kernel.org/project/linux-rockchip/patch/20210618131526.566762-5-benjamin.gaignard@xxxxxxxxxxxxx/ > After rebased it on v5.18-rc1, resend in standalone mode. > > .../media/v4l/pixfmt-yuv-planar.rst | 76 +++++++++++++++++++ > drivers/media/v4l2-core/v4l2-common.c | 1 + > drivers/media/v4l2-core/v4l2-ioctl.c | 1 + > include/uapi/linux/videodev2.h | 1 + > 4 files changed, 79 insertions(+) > > diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst > index 8dff5906639b..6d65c8ac44f0 100644 > --- a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst > +++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst > @@ -102,6 +102,13 @@ All components are stored with the same number of bits per component. > - 64x32 tiles > > Horizontal Z order > + * - V4L2_PIX_FMT_P010 > + - 'P010' > + - 16 > + - 4:2:0 > + - Cb, Cr > + - No > + - Linear This entry should go after V4L2_PIX_FMT_NV12MT_16X16... > * - V4L2_PIX_FMT_NV12MT_16X16 > - 'VM12' > - 8 ...and the V4L2_PIX_FMT_NV12MT_16X16 entry should be fixed: it says 4:2:2 for the Subsampling column, but that should be 4:2:0. > @@ -171,6 +178,7 @@ horizontally. > .. _V4L2-PIX-FMT-NV21: > .. _V4L2-PIX-FMT-NV12M: > .. _V4L2-PIX-FMT-NV21M: > +.. _V4L2-PIX-FMT-P010: > > NV12, NV21, NV12M and NV21M > --------------------------- > @@ -519,6 +527,74 @@ number of lines as the luma plane. > - Cb\ :sub:`33` > - Cr\ :sub:`33` > > +.. _V4L2_PIX_FMT_P010: > + > +P010 > +---- > + > +The number of bytes in one luminance row must be divisible by 16, Um, isn't that something that the driver enforces in the bytesperline field of struct v4l2_pix_format? I don't think this should be a limitation of the format. > +which means there will be padded 0 in the right edge when necessary. > + > +.. raw:: latex > + > + \begingroup > + \small > + \setlength{\tabcolsep}{2pt} > + > +.. tabularcolumns:: |p{2.6cm}|p{0.70cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}| > + > +.. flat-table:: P010 16 Bits per component > + :header-rows: 2 > + :stub-columns: 0 > + > + * - Identifier > + - Code > + - :cspan:`7` Byte 0 in memory > + > + - :cspan:`7` Byte 1 > + * - > + - > + - 7 > + - 6 > + - 5 > + - 4 > + - 3 > + - 2 > + - 1 > + - 0 > + > + - 7 > + - 6 > + - 5 > + - 4 > + - 3 > + - 2 > + - 1 > + - 0 > + * - ``V4L2_PIX_FMT_P010`` > + - 'P010' > + > + - Y\ :sub:`9` > + - Y\ :sub:`8` > + - Y\ :sub:`7` > + - Y\ :sub:`6` > + - Y\ :sub:`5` > + - Y\ :sub:`4` > + - Y\ :sub:`3` > + - Y\ :sub:`2` > + > + - Y\ :sub:`1` > + - Y\ :sub:`0` > + - 0 > + - 0 > + - 0 > + - 0 > + - 0 > + - 0 This just shows the Y component, but not the CbCr components. I would expect to see something similar to the 'Sample 4x4 NV12M Image' table in section 2.7.1.2.1.1. Regards, Hans > + > +.. raw:: latex > + > + \endgroup > > Fully Planar YUV Formats > ======================== > diff --git a/drivers/media/v4l2-core/v4l2-common.c b/drivers/media/v4l2-core/v4l2-common.c > index df34b2a283bc..1e38ad8906a2 100644 > --- a/drivers/media/v4l2-core/v4l2-common.c > +++ b/drivers/media/v4l2-core/v4l2-common.c > @@ -266,6 +266,7 @@ const struct v4l2_format_info *v4l2_format_info(u32 format) > { .format = V4L2_PIX_FMT_NV61, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 }, > { .format = V4L2_PIX_FMT_NV24, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 1, .vdiv = 1 }, > { .format = V4L2_PIX_FMT_NV42, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 1, .vdiv = 1 }, > + { .format = V4L2_PIX_FMT_P010, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 2, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 }, > > { .format = V4L2_PIX_FMT_YUV410, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 4 }, > { .format = V4L2_PIX_FMT_YVU410, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 4 }, > diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c > index 96e307fe3aab..e14d7e1a038e 100644 > --- a/drivers/media/v4l2-core/v4l2-ioctl.c > +++ b/drivers/media/v4l2-core/v4l2-ioctl.c > @@ -1301,6 +1301,7 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt) > case V4L2_PIX_FMT_NV61: descr = "Y/CrCb 4:2:2"; break; > case V4L2_PIX_FMT_NV24: descr = "Y/CbCr 4:4:4"; break; > case V4L2_PIX_FMT_NV42: descr = "Y/CrCb 4:4:4"; break; > + case V4L2_PIX_FMT_P010: descr = "10-bit Y/CrCb 4:2:0"; break; > case V4L2_PIX_FMT_NV12_4L4: descr = "Y/CbCr 4:2:0 (4x4 Linear)"; break; > case V4L2_PIX_FMT_NV12_16L16: descr = "Y/CbCr 4:2:0 (16x16 Linear)"; break; > case V4L2_PIX_FMT_NV12_32L32: descr = "Y/CbCr 4:2:0 (32x32 Linear)"; break; > diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h > index 4c09969e7112..2e451c454db3 100644 > --- a/include/uapi/linux/videodev2.h > +++ b/include/uapi/linux/videodev2.h > @@ -601,6 +601,7 @@ struct v4l2_pix_format { > #define V4L2_PIX_FMT_NV61 v4l2_fourcc('N', 'V', '6', '1') /* 16 Y/CrCb 4:2:2 */ > #define V4L2_PIX_FMT_NV24 v4l2_fourcc('N', 'V', '2', '4') /* 24 Y/CbCr 4:4:4 */ > #define V4L2_PIX_FMT_NV42 v4l2_fourcc('N', 'V', '4', '2') /* 24 Y/CrCb 4:4:4 */ > +#define V4L2_PIX_FMT_P010 v4l2_fourcc('P', '0', '1', '0') /* 15 Y/CbCr 4:2:0 10-bit per pixel*/ > > /* two non contiguous planes - one Y, one Cr + Cb interleaved */ > #define V4L2_PIX_FMT_NV12M v4l2_fourcc('N', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 */