Hi,
I have this ADS Tech USB Instant TV device and would like it to work with my
Linux Distro. Can you help?
Thanks
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-22-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #36-Ubuntu SMP Thu Jun 3 22:02:19 UTC 2010 (Ubuntu 2.6.32-22.36-generic 2.6.32.11+drm33.2)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007dee0000 (usable)
[ 0.000000] BIOS-e820: 000000007dee0000 - 000000007deec000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007deec000 - 000000007df00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007df00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x7dee0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07DF00000 mask FFFF00000 uncachable
[ 0.000000] 2 base 07E000000 mask FFE000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000ce000 - 00000000000d0000 (reserved)
[ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007dee0000 (usable)
[ 0.000000] modified: 000000007dee0000 - 000000007deec000 (ACPI data)
[ 0.000000] modified: 000000007deec000 - 000000007df00000 (ACPI NVS)
[ 0.000000] modified: 000000007df00000 - 0000000080000000 (reserved)
[ 0.000000] modified: 00000000ff800000 - 00000000ffc00000 (reserved)
[ 0.000000] modified: 00000000fffffc00 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 3780a000 - 37fefa8e
[ 0.000000] Allocated new RAMDISK: 008de000 - 010c3a8e
[ 0.000000] Move RAMDISK from 000000003780a000 - 0000000037fefa8d to 008de000 - 010c3a8d
[ 0.000000] ACPI: RSDP 000f6560 00014 (v00 HP )
[ 0.000000] ACPI: RSDT 7dee685b 00030 (v01 HP 3084 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 7deebed2 00074 (v01 HP 3084 06040000 PTL 00000050)
[ 0.000000] ACPI: DSDT 7dee6c96 0523C (v01 HP 3084 06040000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 7defcfc0 00040
[ 0.000000] ACPI: BOOT 7deebfd8 00028 (v01 HP 3084 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 7dee688b 001F3 (v01 HP 3084 00002000 INTL 20030224)
[ 0.000000] 1126MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [00008da000 - 00008dd130] BRK ==> [00008da000 - 00008dd130]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00008de000 - 00010c3a8e] NEW RAMDISK ==> [00008de000 - 00010c3a8e]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007dee0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007dee0
[ 0.000000] On node 0 totalpages: 515707
[ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c10c5000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2254 pages used for memmap
[ 0.000000] HighMem zone: 286228 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
[ 0.000000] PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7f800000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36024 r0 d21320 u4194304
[ 0.000000] pcpu-alloc: s36024 r0 d21320 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 511677
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 10316160 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007dee0)
[ 0.000000] Memory: 2018556k/2063232k available (4673k kernel code, 43272k reserved, 2121k data, 656k init, 1153928k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB)
[ 0.000000] .data : 0xc0590663 - 0xc07a2e48 (2121 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0590663 (4673 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:256
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1596.117 MHz processor.
[ 0.008017] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.23 BogoMIPS (lpj=6384468)
[ 0.008047] Security Framework initialized
[ 0.008094] AppArmor: AppArmor initialized
[ 0.008106] Mount-cache hash table entries: 512
[ 0.008314] Initializing cgroup subsys ns
[ 0.008324] Initializing cgroup subsys cpuacct
[ 0.008329] Initializing cgroup subsys memory
[ 0.008342] Initializing cgroup subsys devices
[ 0.008346] Initializing cgroup subsys freezer
[ 0.008350] Initializing cgroup subsys net_cls
[ 0.008385] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008388] CPU: L2 cache: 2048K
[ 0.008396] mce: CPU supports 5 MCE banks
[ 0.008422] Performance Events:
[ 0.008426] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.008429] no hardware sampling interrupt available.
[ 0.008431] p6 PMU driver.
[ 0.008439] ... version: 0
[ 0.008441] ... bit width: 32
[ 0.008444] ... generic registers: 2
[ 0.008446] ... value mask: 00000000ffffffff
[ 0.008449] ... max period: 000000007fffffff
[ 0.008452] ... fixed-purpose events: 0
[ 0.008454] ... event mask: 0000000000000003
[ 0.008462] Checking 'hlt' instruction... OK.
[ 0.025080] SMP alternatives: switching to UP code
[ 0.033611] Freeing SMP alternatives: 19k freed
[ 0.033624] ACPI: Core revision 20090903
[ 0.044214] ACPI: setting ELCR to 0200 (from 0c20)
[ 0.048010] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.048021] ftrace: allocating 21771 entries in 43 pages
[ 0.052098] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.052103] weird, boot CPU (#0) not listed by the BIOS.
[ 0.052106] SMP motherboard not detected.
[ 0.052110] Local APIC not detected. Using dummy APIC emulation.
[ 0.052113] SMP disabled
[ 0.052255] Brought up 1 CPUs
[ 0.052258] Total of 1 processors activated (3192.23 BogoMIPS).
[ 0.054046] CPU0 attaching NULL sched-domain.
[ 0.054244] devtmpfs: initialized
[ 0.054691] regulator: core version 0.5
[ 0.054712] Time: 14:29:26 Date: 06/18/10
[ 0.054767] NET: Registered protocol family 16
[ 0.054911] EISA bus registered
[ 0.054923] ACPI: bus type pci registered
[ 0.057157] PCI: PCI BIOS revision 2.10 entry at 0xfd9a2, last bus=2
[ 0.057160] PCI: Using configuration type 1 for base access
[ 0.058307] bio: create slab <bio-0> at 0
[ 0.059077] ACPI: EC: Look up EC in DSDT
[ 0.064179] ACPI: Interpreter enabled
[ 0.064196] ACPI: (supports S0 S3 S4 S5)
[ 0.064221] ACPI: Using PIC for interrupt routing
[ 0.068262] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 0.073135] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
[ 0.073314] ACPI: No dock devices found.
[ 0.076358] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.076502] pci 0000:00:02.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff]
[ 0.076508] pci 0000:00:02.0: reg 14 32bit mmio: [0xe0000000-0xe007ffff]
[ 0.076514] pci 0000:00:02.0: reg 18 io port: [0x1800-0x1807]
[ 0.076534] pci 0000:00:02.0: supports D1
[ 0.076553] pci 0000:00:02.1: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff]
[ 0.076559] pci 0000:00:02.1: reg 14 32bit mmio: [0xe0080000-0xe00fffff]
[ 0.076582] pci 0000:00:02.1: supports D1
[ 0.076650] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
[ 0.076701] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
[ 0.076750] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
[ 0.076806] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe0100000-0xe01003ff]
[ 0.076860] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.076865] pci 0000:00:1d.7: PME# disabled
[ 0.076947] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 0.076952] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
[ 0.076975] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.076982] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.076989] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.076996] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.077004] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
[ 0.077011] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.077059] pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f]
[ 0.077099] pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff]
[ 0.077106] pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff]
[ 0.077113] pci 0000:00:1f.5: reg 18 32bit mmio: [0xe0100c00-0xe0100dff]
[ 0.077120] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xe0100800-0xe01008ff]
[ 0.077147] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.077152] pci 0000:00:1f.5: PME# disabled
[ 0.077181] pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff]
[ 0.077187] pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f]
[ 0.077222] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.077226] pci 0000:00:1f.6: PME# disabled
[ 0.077263] pci 0000:02:00.0: reg 10 io port: [0x3000-0x30ff]
[ 0.077270] pci 0000:02:00.0: reg 14 32bit mmio: [0xe0205800-0xe02058ff]
[ 0.077306] pci 0000:02:00.0: supports D1 D2
[ 0.077309] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.077314] pci 0000:02:00.0: PME# disabled
[ 0.077344] pci 0000:02:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.077362] pci 0000:02:01.0: supports D1 D2
[ 0.077364] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.077369] pci 0000:02:01.0: PME# disabled
[ 0.077400] pci 0000:02:01.1: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.077417] pci 0000:02:01.1: supports D1 D2
[ 0.077420] pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.077425] pci 0000:02:01.1: PME# disabled
[ 0.077465] pci 0000:02:06.0: reg 10 32bit mmio: [0xe0204000-0xe0204fff]
[ 0.077506] pci 0000:02:06.0: PME# supported from D0 D3hot D3cold
[ 0.077511] pci 0000:02:06.0: PME# disabled
[ 0.077541] pci 0000:02:07.0: reg 10 32bit mmio: [0xe0205000-0xe02057ff]
[ 0.077549] pci 0000:02:07.0: reg 14 32bit mmio: [0xe0200000-0xe0203fff]
[ 0.077585] pci 0000:02:07.0: supports D1 D2
[ 0.077588] pci 0000:02:07.0: PME# supported from D0 D1 D2 D3hot
[ 0.077593] pci 0000:02:07.0: PME# disabled
[ 0.077623] pci 0000:00:1e.0: transparent bridge
[ 0.077628] pci 0000:00:1e.0: bridge io port: [0x3000-0x3fff]
[ 0.077633] pci 0000:00:1e.0: bridge 32bit mmio: [0xe0200000-0xe02fffff]
[ 0.077674] pci_bus 0000:00: on NUMA node 0
[ 0.077679] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.077873] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.082219] ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
[ 0.082353] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.082485] ACPI: PCI Interrupt Link [LNKC] (IRQs *11)
[ 0.082616] ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
[ 0.082746] ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled.
[ 0.082878] ACPI: PCI Interrupt Link [LNKF] (IRQs *11)
[ 0.083008] ACPI: PCI Interrupt Link [LNKG] (IRQs 11) *0, disabled.
[ 0.083140] ACPI: PCI Interrupt Link [LNKH] (IRQs *11)
[ 0.083248] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.083259] vgaarb: loaded
[ 0.083396] SCSI subsystem initialized
[ 0.083443] libata version 3.00 loaded.
[ 0.083522] usbcore: registered new interface driver usbfs
[ 0.083540] usbcore: registered new interface driver hub
[ 0.083570] usbcore: registered new device driver usb
[ 0.083737] ACPI: WMI: Mapper loaded
[ 0.083739] PCI: Using ACPI for IRQ routing
[ 0.083929] NetLabel: Initializing
[ 0.083931] NetLabel: domain hash size = 128
[ 0.083934] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.083950] NetLabel: unlabeled traffic allowed by default
[ 0.083984] Switching to clocksource tsc
[ 0.086425] AppArmor: AppArmor Filesystem Enabled
[ 0.086438] pnp: PnP ACPI init
[ 0.086450] ACPI: bus type pnp registered
[ 0.092387] pnp: PnP ACPI: found 11 devices
[ 0.092390] ACPI: ACPI bus type pnp unregistered
[ 0.092394] PnPBIOS: Disabled by ACPI PNP
[ 0.092408] system 00:04: ioport range 0x600-0x60f has been reserved
[ 0.092412] system 00:04: ioport range 0x800-0x80f has been reserved
[ 0.092416] system 00:04: ioport range 0x1000-0x107f has been reserved
[ 0.092420] system 00:04: ioport range 0x1180-0x11bf has been reserved
[ 0.092424] system 00:04: iomem range 0xfec10000-0xfec1ffff has been reserved
[ 0.127139] pci 0000:02:01.0: CardBus bridge, secondary bus 0000:03
[ 0.127143] pci 0000:02:01.0: IO window: 0x003400-0x0034ff
[ 0.127148] pci 0000:02:01.0: IO window: 0x003800-0x0038ff
[ 0.127153] pci 0000:02:01.0: PREFETCH window: 0x80000000-0x83ffffff
[ 0.127159] pci 0000:02:01.0: MEM window: 0x8c000000-0x8fffffff
[ 0.127164] pci 0000:02:01.1: CardBus bridge, secondary bus 0000:07
[ 0.127167] pci 0000:02:01.1: IO window: 0x003c00-0x003cff
[ 0.127172] pci 0000:02:01.1: IO window: 0x001400-0x0014ff
[ 0.127177] pci 0000:02:01.1: PREFETCH window: 0x84000000-0x87ffffff
[ 0.127182] pci 0000:02:01.1: MEM window: 0x90000000-0x93ffffff
[ 0.127187] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.127191] pci 0000:00:1e.0: IO window: 0x3000-0x3fff
[ 0.127197] pci 0000:00:1e.0: MEM window: 0xe0200000-0xe02fffff
[ 0.127202] pci 0000:00:1e.0: PREFETCH window: 0x80000000-0x87ffffff
[ 0.127218] pci 0000:00:1e.0: setting latency timer to 64
[ 0.127394] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[ 0.127398] PCI: setting IRQ 11 as level-triggered
[ 0.127403] pci 0000:02:01.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
[ 0.127572] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[ 0.127575] PCI: setting IRQ 5 as level-triggered
[ 0.127580] pci 0000:02:01.1: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 0.127587] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.127591] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.127595] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff]
[ 0.127598] pci_bus 0000:02: resource 1 mem: [0xe0200000-0xe02fffff]
[ 0.127602] pci_bus 0000:02: resource 2 pref mem [0x80000000-0x87ffffff]
[ 0.127605] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.127608] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.127612] pci_bus 0000:03: resource 0 io: [0x3400-0x34ff]
[ 0.127615] pci_bus 0000:03: resource 1 io: [0x3800-0x38ff]
[ 0.127619] pci_bus 0000:03: resource 2 pref mem [0x80000000-0x83ffffff]
[ 0.127622] pci_bus 0000:03: resource 3 mem: [0x8c000000-0x8fffffff]
[ 0.127626] pci_bus 0000:07: resource 0 io: [0x3c00-0x3cff]
[ 0.127629] pci_bus 0000:07: resource 1 io: [0x1400-0x14ff]
[ 0.127632] pci_bus 0000:07: resource 2 pref mem [0x84000000-0x87ffffff]
[ 0.127636] pci_bus 0000:07: resource 3 mem: [0x90000000-0x93ffffff]
[ 0.127671] NET: Registered protocol family 2
[ 0.127775] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.128158] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.129265] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.130085] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.130089] TCP reno registered
[ 0.130258] NET: Registered protocol family 1
[ 0.130295] pci 0000:00:02.0: Boot video device
[ 0.130534] Simple Boot Flag at 0x36 set to 0x1
[ 0.130651] cpufreq-nforce2: No nForce2 chipset.
[ 0.130686] Scanning for low memory corruption every 60 seconds
[ 0.130866] audit: initializing netlink socket (disabled)
[ 0.130893] type=2000 audit(1276871366.127:1): initialized
[ 0.143939] Trying to unpack rootfs image as initramfs...
[ 0.160263] highmem bounce pool size: 64 pages
[ 0.160272] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.162229] VFS: Disk quotas dquot_6.5.2
[ 0.162315] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.168207] fuse init (API version 7.13)
[ 0.168339] msgmni has been set to 1690
[ 0.168630] alg: No test for stdrng (krng)
[ 0.168701] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.168706] io scheduler noop registered
[ 0.168708] io scheduler anticipatory registered
[ 0.168711] io scheduler deadline registered
[ 0.168760] io scheduler cfq registered (default)
[ 0.168916] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.168945] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.169974] ACPI: AC Adapter [ACAD] (on-line)
[ 0.170072] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.170113] ACPI: Lid Switch [LID0]
[ 0.170171] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.170175] ACPI: Power Button [PWRB]
[ 0.170239] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.170242] ACPI: Power Button [PWRF]
[ 0.170505] Marking TSC unstable due to TSC halts in idle
[ 0.170547] processor LNXCPU:00: registered as cooling_device0
[ 0.174983] Switching to clocksource acpi_pm
[ 0.177275] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.177285] ACPI: Thermal Zone [THRM] (53 C)
[ 0.179047] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.179144] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.179223] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[ 0.179568] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.179745] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 0.179754] serial 0000:00:1f.6: PCI INT B disabled
[ 0.181005] brd: module loaded
[ 0.181590] loop: module loaded
[ 0.181693] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 0.181806] ata_piix 0000:00:1f.1: version 2.13
[ 0.181818] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 0.182034] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 0.182039] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 0.182090] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.184137] isapnp: Scanning for PnP cards...
[ 0.191138] scsi0 : ata_piix
[ 0.192660] scsi1 : ata_piix
[ 0.194636] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 0.194641] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 0.195370] Fixed MDIO Bus: probed
[ 0.195415] PPP generic driver version 2.4.2
[ 0.195477] tun: Universal TUN/TAP device driver, 1.6
[ 0.195480] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 0.195588] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.195787] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 0.195793] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 0.195815] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.195819] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.195859] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.195894] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.199767] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.199775] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 0.252057] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xe0100000
[ 0.264040] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.264234] usb usb1: configuration #1 chosen from 1 choice
[ 0.264273] hub 1-0:1.0: USB hub found
[ 0.264286] hub 1-0:1.0: 6 ports detected
[ 0.264373] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.264397] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.264693] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 0.264697] PCI: setting IRQ 10 as level-triggered
[ 0.264702] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[ 0.264714] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.264718] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.264775] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.264804] uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001820
[ 0.264912] usb usb2: configuration #1 chosen from 1 choice
[ 0.264948] hub 2-0:1.0: USB hub found
[ 0.264957] hub 2-0:1.0: 2 ports detected
[ 0.265172] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.265177] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 0.265184] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.265187] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.265225] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.265246] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001840
[ 0.265352] usb usb3: configuration #1 chosen from 1 choice
[ 0.265389] hub 3-0:1.0: USB hub found
[ 0.265397] hub 3-0:1.0: 2 ports detected
[ 0.265447] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 0.265454] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.265458] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.265493] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.265513] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001860
[ 0.265626] usb usb4: configuration #1 chosen from 1 choice
[ 0.265658] hub 4-0:1.0: USB hub found
[ 0.265666] hub 4-0:1.0: 2 ports detected
[ 0.265778] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PSM1] at 0x60,0x64 irq 1,12
[ 0.268404] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.272336] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.272516] mice: PS/2 mouse device common for all mice
[ 0.272691] rtc_cmos 00:01: RTC can wake from S4
[ 0.272743] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.272763] rtc0: alarms up to one month, y3k, 242 bytes nvram
[ 0.272916] device-mapper: uevent: version 1.0.3
[ 0.273067] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
[ 0.275856] device-mapper: multipath: version 1.1.0 loaded
[ 0.275860] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.276068] EISA: Probing bus 0 at eisa.0
[ 0.276077] Cannot allocate resource for EISA slot 1
[ 0.276081] Cannot allocate resource for EISA slot 2
[ 0.276084] Cannot allocate resource for EISA slot 3
[ 0.276105] EISA: Detected 0 cards.
[ 0.280543] cpuidle: using governor ladder
[ 0.280602] cpuidle: using governor menu
[ 0.281152] TCP cubic registered
[ 0.281355] NET: Registered protocol family 10
[ 0.281898] lo: Disabled Privacy Extensions
[ 0.282289] NET: Registered protocol family 17
[ 0.282588] Using IPI No-Shortcut mode
[ 0.282703] PM: Resume from disk failed.
[ 0.282724] registered taskstats version 1
[ 0.282992] Magic number: 14:761:485
[ 0.283110] rtc_cmos 00:01: setting system clock to 2010-06-18 14:29:26 UTC (1276871366)
[ 0.283114] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.283117] EDD information not available.
[ 0.348178] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.368933] ata2.00: ATAPI: SD-R2512, 1A04, max MWDMA2
[ 0.369081] ata1.00: ATA-6: ST9160821A, 3.ALE, max UDMA/100
[ 0.369085] ata1.00: 312581808 sectors, multi 16: LBA48
[ 0.384470] ata2.00: configured for MWDMA2
[ 0.384727] ata1.00: configured for UDMA/100
[ 0.740710] Freeing initrd memory: 8086k freed
[ 0.836303] isapnp: No Plug & Play device found
[ 0.836575] scsi 0:0:0:0: Direct-Access ATA ST9160821A n/a PQ: 0 ANSI: 5
[ 0.836864] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.837137] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 0.837202] sd 0:0:0:0: [sda] Write Protect is off
[ 0.837205] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.837236] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.837425] sda:
[ 0.848040] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 0.849643] sda1
[ 0.849930] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.868977] scsi 1:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-R2512 1A04 PQ: 0 ANSI: 5
[ 0.876951] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 0.876955] Uniform CD-ROM driver Revision: 3.20
[ 0.877064] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 0.877130] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 0.877187] Freeing unused kernel memory: 656k freed
[ 0.877745] Write protecting the kernel text: 4676k
[ 0.877789] Write protecting the kernel read-only data: 1840k
[ 0.897268] udev: starting version 151
[ 1.026881] usb 2-1: configuration #1 chosen from 1 choice
[ 1.058694] usbcore: registered new interface driver hiddev
[ 1.083568] input: Primax Electronics Wireless Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input5
[ 1.084037] generic-usb 0003:0461:4D2F.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [Primax Electronics Wireless Mouse] on usb-0000:00:1d.0-1/input0
[ 1.084077] usbcore: registered new interface driver usbhid
[ 1.084173] usbhid: v2.6:USB HID core driver
[ 1.140128] ACPI: Battery Slot [BAT0] (battery present)
[ 1.339418] FDC 0 is a National Semiconductor PC87306
[ 1.613746] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.613781] 8139cp 0000:02:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.628312] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
[ 1.628319] ohci1394 0000:02:07.0: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11
[ 1.628552] 8139too Fast Ethernet driver 0.9.28
[ 1.684073] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[e0205000-e02057ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 1.684356] 8139too 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[ 1.685415] eth0: RealTek RTL8139 at 0x3000, 00:c0:9f:4c:0c:aa, IRQ 10
[ 1.686742] EXT4-fs (loop0): mounted filesystem with ordered data mode
[ 2.956218] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f00002159b6]
[ 13.978184] udev: starting version 151
[ 14.162878] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 14.163098] acpi device:03: registered as cooling_device1
[ 14.163238] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input6
[ 14.163319] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
[ 14.484279] irda_init()
[ 14.484301] NET: Registered protocol family 23
[ 14.493276] parport_pc 00:05: reported by Plug and Play ACPI
[ 14.493346] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 14.516725] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.524586] intel_rng: FWH not detected
[ 14.527455] lp: driver loaded but no devices found
[ 14.552812] Linux agpgart interface v0.103
[ 14.580400] lp0: using parport0 (interrupt-driven).
[ 14.582445] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1.
[ 14.582492] nsc-ircc, chip->init
[ 14.582502] nsc-ircc, Found chip at base=0x04e
[ 14.582525] nsc-ircc, driver loaded (Dag Brattli)
[ 14.582532] nsc_ircc_open(), can't get iobase of 0x2f8
[ 14.582561] nsc-ircc, Found chip at base=0x04e
[ 14.582584] nsc-ircc, driver loaded (Dag Brattli)
[ 14.582587] nsc_ircc_open(), can't get iobase of 0x2f8
[ 14.582853] nsc-ircc 00:08: disabled
[ 14.590978] ppdev: user-space parallel port driver
[ 14.609005] agpgart-intel 0000:00:00.0: Intel 855GM Chipset
[ 14.609775] agpgart-intel 0000:00:00.0: detected 32636K stolen memory
[ 14.621322] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
[ 14.637224] lib80211: common routines for IEEE802.11 drivers
[ 14.637230] lib80211_crypt: registered algorithm 'NULL'
[ 14.696892] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 14.696898] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx>
[ 14.731467] yenta_cardbus 0000:02:01.0: CardBus bridge found [103c:3084]
[ 14.731486] yenta_cardbus 0000:02:01.0: Enabling burst memory read transactions
[ 14.731491] yenta_cardbus 0000:02:01.0: Using CSCINT to route CSC interrupts to PCI
[ 14.731495] yenta_cardbus 0000:02:01.0: Routing CardBus interrupts to PCI
[ 14.731501] yenta_cardbus 0000:02:01.0: TI: mfunc 0x01111c22, devctl 0x64
[ 14.733068] type=1505 audit(1276889380.948:2): operation="profile_load" pid=538 name="/sbin/dhclient3"
[ 14.733826] type=1505 audit(1276889380.948:3): operation="profile_load" pid=538 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 14.734238] type=1505 audit(1276889380.948:4): operation="profile_load" pid=538 name="/usr/lib/connman/scripts/dhclient-script"
[ 14.740593] type=1505 audit(1276889380.956:5): operation="profile_load" pid=547 name="/usr/sbin/ntpd"
[ 14.823131] [drm] Initialized drm 1.1.0 20060810
[ 14.856138] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 14.856144] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 14.935497] [drm] i915 disabling kernel modesetting for known bad device.
[ 14.935533] pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[ 14.935539] pci 0000:00:02.0: setting latency timer to 64
[ 14.957743] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 14.960361] yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0018, PCI irq 11
[ 14.960365] yenta_cardbus 0000:02:01.0: Socket status: 30000006
[ 14.960371] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
[ 14.960382] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[ 14.960387] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: clean.
[ 14.960666] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff
[ 14.960670] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x87ffffff
[ 14.962580] ipw2200 0000:02:06.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 14.968903] vga16fb: initializing
[ 14.968908] vga16fb: mapped to 0xc00a0000
[ 14.969070] fb0: VGA16 VGA frame buffer device
[ 14.973844] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 14.973904] ipw2200 0000:02:06.0: firmware: requesting ipw2200-bss.fw
[ 15.361265] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 15.361302] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 15.395811] Console: switching to colour frame buffer device 80x30
[ 15.409402] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[ 15.409439] yenta_cardbus 0000:02:01.1: CardBus bridge found [103c:3084]
[ 15.409457] yenta_cardbus 0000:02:01.1: Using CSCINT to route CSC interrupts to PCI
[ 15.409460] yenta_cardbus 0000:02:01.1: Routing CardBus interrupts to PCI
[ 15.409466] yenta_cardbus 0000:02:01.1: TI: mfunc 0x01111c22, devctl 0x64
[ 15.410014] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008
[ 15.446186] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 15.640258] yenta_cardbus 0000:02:01.1: ISA IRQ mask 0x0018, PCI irq 5
[ 15.640264] yenta_cardbus 0000:02:01.1: Socket status: 30000006
[ 15.640270] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #06 to #0a
[ 15.640284] yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[ 15.640290] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3000-0x3fff: clean.
[ 15.640585] yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff
[ 15.640589] yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x87ffffff
[ 15.680045] intel8x0_measure_ac97_clock: measured 53817 usecs (2593 samples)
[ 15.680051] intel8x0: clocking to 48000
[ 15.707152] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 15.708782] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 15.709458] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 15.710034] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 15.710788] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 16.214601] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean.
[ 16.216206] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 16.216881] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
[ 16.217458] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
[ 16.218211] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[ 16.539559] Adding 261112k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:261112k
[ 16.831000] type=1505 audit(1276889383.044:6): operation="profile_load" pid=712 name="/usr/share/gdm/guest-session/Xsession"
[ 16.848604] type=1505 audit(1276889383.064:7): operation="profile_replace" pid=714 name="/sbin/dhclient3"
[ 16.849365] type=1505 audit(1276889383.064:8): operation="profile_replace" pid=714 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 16.855445] type=1505 audit(1276889383.068:9): operation="profile_replace" pid=714 name="/usr/lib/connman/scripts/dhclient-script"
[ 16.921971] type=1505 audit(1276889383.136:10): operation="profile_load" pid=718 name="/usr/bin/evince"
[ 16.928738] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 17.068980] type=1505 audit(1276889383.284:11): operation="profile_load" pid=718 name="/usr/bin/evince-previewer"
[ 21.693418] ttyS1: LSR safety check engaged!
[ 26.940027] eth0: no IPv6 routers present
[ 27.220026] eth1: no IPv6 routers present
[ 38.295512] lib80211_crypt: registered algorithm 'TKIP'
[ 57.868056] usb 1-2: new high speed USB device using ehci_hcd and address 3
[ 58.001185] usb 1-2: configuration #1 chosen from 1 choice
[ 58.114321] Linux video capture interface: v2.00
[ 58.153711] em28xx: New device @ 480 Mbps (eb1a:2821, interface 0, class 0)
[ 58.153837] em28xx #0: chip ID is em2820 (or em2710)
[ 58.245436] em28xx #0: board has no eeprom
[ 58.256436] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1)
[ 58.270694] em28xx #0: found i2c device @ 0x4a [saa7113h]
[ 58.274819] em28xx #0: found i2c device @ 0x60 [remote IR sensor]
[ 58.281943] em28xx #0: found i2c device @ 0x86 [tda9887]
[ 58.293941] em28xx #0: found i2c device @ 0xc6 [tuner (analog)]
[ 58.304439] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected.
[ 58.304444] em28xx #0: You may try to use card=<n> insmod option to workaround that.
[ 58.304447] em28xx #0: Please send an email with this log to:
[ 58.304449] em28xx #0: V4L Mailing List <linux-media@xxxxxxxxxxxxxxx>
[ 58.304452] em28xx #0: Board eeprom hash is 0x00000000
[ 58.304455] em28xx #0: Board i2c devicelist hash is 0x8cad00a0
[ 58.304457] em28xx #0: Here is a list of valid choices for the card=<n> insmod option:
[ 58.304461] em28xx #0: card=0 -> Unknown EM2800 video grabber
[ 58.304464] em28xx #0: card=1 -> Unknown EM2750/28xx video grabber
[ 58.304467] em28xx #0: card=2 -> Terratec Cinergy 250 USB
[ 58.304470] em28xx #0: card=3 -> Pinnacle PCTV USB 2
[ 58.304473] em28xx #0: card=4 -> Hauppauge WinTV USB 2
[ 58.304476] em28xx #0: card=5 -> MSI VOX USB 2.0
[ 58.304478] em28xx #0: card=6 -> Terratec Cinergy 200 USB
[ 58.304481] em28xx #0: card=7 -> Leadtek Winfast USB II
[ 58.304484] em28xx #0: card=8 -> Kworld USB2800
[ 58.304487] em28xx #0: card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2
[ 58.304491] em28xx #0: card=10 -> Hauppauge WinTV HVR 900
[ 58.304494] em28xx #0: card=11 -> Terratec Hybrid XS
[ 58.304497] em28xx #0: card=12 -> Kworld PVR TV 2800 RF
[ 58.304500] em28xx #0: card=13 -> Terratec Prodigy XS
[ 58.304503] em28xx #0: card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0
[ 58.304506] em28xx #0: card=15 -> V-Gear PocketTV
[ 58.304509] em28xx #0: card=16 -> Hauppauge WinTV HVR 950
[ 58.304512] em28xx #0: card=17 -> Pinnacle PCTV HD Pro Stick
[ 58.304515] em28xx #0: card=18 -> Hauppauge WinTV HVR 900 (R2)
[ 58.304518] em28xx #0: card=19 -> EM2860/SAA711X Reference Design
[ 58.304521] em28xx #0: card=20 -> AMD ATI TV Wonder HD 600
[ 58.304524] em28xx #0: card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder
[ 58.304527] em28xx #0: card=22 -> EM2710/EM2750/EM2751 webcam grabber
[ 58.304530] em28xx #0: card=23 -> Huaqi DLCW-130
[ 58.304533] em28xx #0: card=24 -> D-Link DUB-T210 TV Tuner
[ 58.304536] em28xx #0: card=25 -> Gadmei UTV310
[ 58.304539] em28xx #0: card=26 -> Hercules Smart TV USB 2.0
[ 58.304542] em28xx #0: card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME)
[ 58.304545] em28xx #0: card=28 -> Leadtek Winfast USB II Deluxe
[ 58.304548] em28xx #0: card=29 -> <NULL>
[ 58.304551] em28xx #0: card=30 -> Videology 20K14XUSB USB2.0
[ 58.304554] em28xx #0: card=31 -> Usbgear VD204v9
[ 58.304557] em28xx #0: card=32 -> Supercomp USB 2.0 TV
[ 58.304560] em28xx #0: card=33 -> <NULL>
[ 58.304562] em28xx #0: card=34 -> Terratec Cinergy A Hybrid XS
[ 58.304565] em28xx #0: card=35 -> Typhoon DVD Maker
[ 58.304568] em28xx #0: card=36 -> NetGMBH Cam
[ 58.304571] em28xx #0: card=37 -> Gadmei UTV330
[ 58.304573] em28xx #0: card=38 -> Yakumo MovieMixer
[ 58.304576] em28xx #0: card=39 -> KWorld PVRTV 300U
[ 58.304579] em28xx #0: card=40 -> Plextor ConvertX PX-TV100U
[ 58.304582] em28xx #0: card=41 -> Kworld 350 U DVB-T
[ 58.304585] em28xx #0: card=42 -> Kworld 355 U DVB-T
[ 58.304588] em28xx #0: card=43 -> Terratec Cinergy T XS
[ 58.304591] em28xx #0: card=44 -> Terratec Cinergy T XS (MT2060)
[ 58.304594] em28xx #0: card=45 -> Pinnacle PCTV DVB-T
[ 58.304597] em28xx #0: card=46 -> Compro, VideoMate U3
[ 58.304599] em28xx #0: card=47 -> KWorld DVB-T 305U
[ 58.304602] em28xx #0: card=48 -> KWorld DVB-T 310U
[ 58.304605] em28xx #0: card=49 -> MSI DigiVox A/D
[ 58.304608] em28xx #0: card=50 -> MSI DigiVox A/D II
[ 58.304611] em28xx #0: card=51 -> Terratec Hybrid XS Secam
[ 58.304614] em28xx #0: card=52 -> DNT DA2 Hybrid
[ 58.304616] em28xx #0: card=53 -> Pinnacle Hybrid Pro
[ 58.304619] em28xx #0: card=54 -> Kworld VS-DVB-T 323UR
[ 58.304622] em28xx #0: card=55 -> Terratec Hybrid XS (em2882)
[ 58.304625] em28xx #0: card=56 -> Pinnacle Hybrid Pro (2)
[ 58.304628] em28xx #0: card=57 -> Kworld PlusTV HD Hybrid 330
[ 58.304631] em28xx #0: card=58 -> Compro VideoMate ForYou/Stereo
[ 58.304634] em28xx #0: card=59 -> <NULL>
[ 58.304637] em28xx #0: card=60 -> Hauppauge WinTV HVR 850
[ 58.304640] em28xx #0: card=61 -> Pixelview PlayTV Box 4 USB 2.0
[ 58.304643] em28xx #0: card=62 -> Gadmei TVR200
[ 58.304646] em28xx #0: card=63 -> Kaiomy TVnPC U2
[ 58.304648] em28xx #0: card=64 -> Easy Cap Capture DC-60
[ 58.304651] em28xx #0: card=65 -> IO-DATA GV-MVP/SZ
[ 58.304654] em28xx #0: card=66 -> Empire dual TV
[ 58.304657] em28xx #0: card=67 -> Terratec Grabby
[ 58.304660] em28xx #0: card=68 -> Terratec AV350
[ 58.304663] em28xx #0: card=69 -> KWorld ATSC 315U HDTV TV Box
[ 58.304666] em28xx #0: card=70 -> Evga inDtube
[ 58.304669] em28xx #0: card=71 -> Silvercrest Webcam 1.3mpix
[ 58.304672] em28xx #0: card=72 -> Gadmei UTV330+
[ 58.304674] em28xx #0: card=73 -> Reddo DVB-C USB TV Box
[ 58.304801] em28xx #0: Config register raw data: 0x10
[ 58.328306] em28xx #0: AC97 vendor ID = 0xffffffff
[ 58.340304] em28xx #0: AC97 features = 0x6a90
[ 58.340307] em28xx #0: Empia 202 AC97 audio processor detected
[ 58.764045] em28xx #0: v4l2 driver version 0.1.2
[ 59.596227] em28xx #0: V4L2 video device registered as /dev/video0
[ 59.596291] em28xx audio device (eb1a:2821): interface 1, class 1
[ 59.596303] em28xx audio device (eb1a:2821): interface 2, class 1
[ 59.596329] usbcore: registered new interface driver em28xx
[ 59.597210] em28xx driver loaded
[ 59.649751] usbcore: registered new interface driver snd-usb-audio
