Le 06/04/2022 à 14:46, Adam Ford a écrit :
On Wed, Apr 6, 2022 at 7:41 AM Benjamin Gaignard
<benjamin.gaignard@xxxxxxxxxxxxx> wrote:
Le 06/04/2022 à 14:28, Adam Ford a écrit :
On Wed, Apr 6, 2022 at 1:56 AM Benjamin Gaignard
<benjamin.gaignard@xxxxxxxxxxxxx> wrote:
Le 05/04/2022 à 23:27, Adam Ford a écrit :
On Mon, Apr 4, 2022 at 10:56 AM Benjamin Gaignard
<benjamin.gaignard@xxxxxxxxxxxxx> wrote:
Le 02/04/2022 à 18:59, Adam Ford a écrit :
On Sat, Apr 2, 2022 at 11:22 AM Adam Ford <aford173@xxxxxxxxx> wrote:
On Fri, Apr 1, 2022 at 8:18 AM Benjamin Gaignard
<benjamin.gaignard@xxxxxxxxxxxxx> wrote:
Le 31/03/2022 à 08:53, Benjamin Gaignard a écrit :
Le 30/03/2022 à 20:52, Adam Ford a écrit :
On Wed, Mar 30, 2022 at 2:53 AM Benjamin Gaignard
<benjamin.gaignard@xxxxxxxxxxxxx> wrote:
Le 28/02/2022 à 15:08, Benjamin Gaignard a écrit :
This series aims to make HEVC uapi stable and usable for hardware
decoder. HEVC uapi is used by 2 mainlined drivers (Cedrus and Hantro)
and 2 out of the tree drivers (rkvdec and RPI).
After the remarks done on version 2, I have completely reworked to
patches
split so changelogs are meaningless. I have also drop "RFC" from the
titles.
Version 4:
- Add num_entry_point_offsets field in struct
v4l2_ctrl_hevc_slice_params
- Fix V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS name
- Initialize control V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS
- Fix space/tab issue in kernel-doc
- Add patch to change data_bit_offset definition
- Fix hantro-media SPDX license
- put controls under stateless section in v4l2-ctrls-defs.c
At the end fluster tests results on IMX8MQ is 77/147 for HEVC codec.
Dear reviewers,
This series is waiting for your feedback,
I tried several times with the suggested repos for both the kernel and
g-streamer without success getting Fluster to pass any tests on the
imx8mq. I can try again but I likely won't get to it until this
weekend. If I can get it working, I'll test both the 8mq and 8mm.
Thanks a lot for that.
Benjamin
Adam,
You may need to check if h265parse and v4l2slh265dec are available on your board.
I ran gst-inspect to see what showed up with 265 in the name.
# gst-inspect-1.0 |grep 265
libav: avdec_h265: libav HEVC (High Efficiency Video Coding) decoder
rtp: rtph265depay: RTP H265 depayloader
rtp: rtph265pay: RTP H265 payloader
typefindfunctions: video/x-h265: h265, x265, 265
v4l2codecs: v4l2slh265dec: V4L2 Stateless H.265 Video Decoder
videoparsersbad: h265parse: H.265 parser
It appears I have both h265parse and v4l2slh265dec.
fluster check if v4l2slh265dec is working fine with this command line:
gst-launch-1.0 appsrc num-buffers=0 ! h265parse ! v4l2slh265dec ! fakesink
so if one of them is missing it won't work.
gst-launch-1.0 appsrc num-buffers=0 ! h265parse ! v4l2slh265dec ! fakesink
Setting pipeline to PAUSED ...
0:00:00.098389938 526 0xaaaaf9d86ac0 ERROR v4l2codecs-decoder
gstv4l2decoder.c:725:gst_v4l2_decoder_get_controls:<v4l2decoder2>
VIDIOC_G_EXT_CTRLS failed: Invalid argument
ERROR: from element
/GstPipeline:pipeline0/v4l2slh265dec:v4l2slh265dec0: Driver did not
report framing and start code method.
Additional debug info:
../subprojects/gst-plugins-bad/sys/v4l2codecs/gstv4l2codech265dec.c(155):
gst_v4l2_codec_h265_dec_open ():
/GstPipeline:pipeline0/v4l2slh265dec:v4l2slh265dec0:
gst_v4l2_decoder_get_controls() failed: Invalid argument
ERROR: pipeline doesn't want to preroll.
ERROR: from element
/GstPipeline:pipeline0/v4l2slh265dec:v4l2slh265dec0: Could not
initialize supporting library.
Additional debug info:
../subprojects/gst-plugins-base/gst-libs/gst/video/gstvideodecoder.c(2909):
gst_video_decoder_change_state ():
/GstPipeline:pipeline0/v4l2slh265dec:v4l2slh265dec0:
Failed to open decoder
ERROR: pipeline doesn't want to preroll.
Failed to set pipeline to PAUSED.
Setting pipeline to NULL ...
Freeing pipeline ...
Does this mean I have a wrong version of the kernel and/or incomplete patches?
I double checked the branches.
Kernel:
https://gitlab.collabora.com/benjamin.gaignard/for-upstream.git
branch: origin/HEVC_UAPI_V4
Gstreamer:
https://gitlab.freedesktop.org/benjamin.gaignard1/gstreamer.git
branch: origin/benjamin.gaignard1/gstreamer-HEVC_aligned_with_kernel_5.15
I am still not able to run h.265/HEVC tests.
Hello Adam,
I have updated the following branches with the versions I have used today:
Kernel:
https://gitlab.collabora.com/benjamin.gaignard/for-upstream.git
branch: origin/HEVC_UAPI_V5 only one change in documentation vs version 4 but rebased in v5.18-rc1
Gstreamer:
https://gitlab.freedesktop.org/benjamin.gaignard1/gstreamer.git
branch: origin/benjamin.gaignard1/gstreamer-HEVC_aligned_with_kernel_5.15 updated on the latest GST main branch
I hope this will work fine this time.
I wish I had better news for you:
dmesg shows the hantro driver is being loaded:
[ 38.612243] hantro-vpu 38300000.video-codec: registered
nxp,imx8mq-vpu-g1-dec as /dev/video0
[ 38.612618] hantro-vpu 38310000.video-codec: registered
nxp,imx8mq-vpu-g2-dec as /dev/video1
# gst-inspect-1.0 |grep 265
libav: avdec_h265: libav HEVC (High Efficiency Video Coding) decoder
rtp: rtph265depay: RTP H265 depayloader
rtp: rtph265pay: RTP H265 payloader
typefindfunctions: video/x-h265: h265, x265, 265
v4l2codecs: v4l2slh265dec: V4L2 Stateless H.265 Video Decoder
videoparsersbad: h265parse: H.265 parser
Fluster reports:
GStreamer-H.265-V4L2SL-Gst1.0: GStreamer H.265 V4L2SL decoder for
GStreamer 1.0... ❌
Still the same error about non supported control ?
# gst-lagst-launch-1.0 appsrc num-buffers=0 ! h265parse !
v4l2slh265dec ! fakesink
Setting pipeline to PAUSED ...
0:00:01.704385508 420 0xaaaaec0a76c0 ERROR v4l2codecs-decoder
gstv4l2decoder.c:725:gst_v4l2_decoder_get_controls:<v4l2decoder2>
VIDIOC_G_EXT_CTRLS failed: Invalid argument
ERROR: from element
/GstPipeline:pipeline0/v4l2slh265dec:v4l2slh265dec0: Driver did not
report framing and start code method.
Additional debug info:
../subprojects/gst-plugins-bad/sys/v4l2codecs/gstv4l2codech265dec.c(155):
gst_v4l2_codec_h265_dec_open ():
/GstPipeline:pipeline0/v4l2slh265dec:v4l2slh265dec0:
gst_v4l2_decoder_get_controls() failed: Invalid argument
ERROR: pipeline doesn't want to preroll.
ERROR: from element
/GstPipeline:pipeline0/v4l2slh265dec:v4l2slh265dec0: Could not
initialize supporting library.
Additional debug info:
../subprojects/gst-plugins-base/gst-libs/gst/video/gstvideodecoder.c(2909):
gst_video_decoder_change_state ():
/GstPipeline:pipeline0/v4l2slh265dec:v4l2slh265dec0:
Failed to open decoder
ERROR: pipeline doesn't want to preroll.
Failed to set pipeline to PAUSED.
Setting pipeline to NULL ...
Freeing pipeline ...
What is the result of v4l2-ctl ?
Here I have:
v4l2-ctl --all -d 1
Driver Info:
Driver name : hantro-vpu
Card type : nxp,imx8mq-vpu-g2-dec
Bus info : platform: hantro-vpu
Driver version : 5.18.0
Capabilities : 0x84204000
Video Memory-to-Memory Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04204000
Video Memory-to-Memory Multiplanar
Streaming
Extended Pix Format
Media Driver Info:
Driver name : hantro-vpu
Model : hantro-vpu
Serial :
Bus info : platform: hantro-vpu
Media version : 5.18.0
Hardware revision: 0x00000000 (0)
Driver version : 5.18.0
Interface Info:
ID : 0x0300000c
Type : V4L Video
Entity Info:
ID : 0x00000001 (1)
Name : nxp,imx8mq-vpu-g2-dec-source
Function : V4L2 I/O
Pad 0x01000002 : 0: Source
Link 0x02000008: to remote pad 0x1000004 of entity 'nxp,imx8mq-vpu-g2-dec-proc': Data, Enabled, Immutable
Priority: 2
Format Video Capture Multiplanar:
Width/Height : 48/48
Pixel Format : 'VT12' (Y/CbCr 4:2:0 (4x4 Linear))
Field : None
Number of planes : 1
Flags :
Colorspace : JPEG
Transfer Function : Default
YCbCr/HSV Encoding: Default
Quantization : Default
Plane 0 :
Bytes per Line : 48
Size Image : 3600
Format Video Output Multiplanar:
Width/Height : 48/48
Pixel Format : 'S265' (HEVC Parsed Slice Data)
Field : None
Number of planes : 1
Flags :
Colorspace : JPEG
Transfer Function : Default
YCbCr/HSV Encoding: Default
Quantization : Default
Plane 0 :
Bytes per Line : 0
Size Image : 4608
User Controls
hantro_hevc_slice_header_skip_b 0x00981a80 (int) : min=0 max=256 step=1 default=0 value=0
Codec Controls
hevc_profile 0x00990b67 (menu) : min=0 max=2 default=0 value=0
0: Main
1: Main Still Picture
2: Main 10
hevc_level 0x00990b68 (menu) : min=0 max=8 default=0 value=0
0: 1
1: 2
2: 2.1
3: 3
4: 3.1
5: 4
6: 4.1
7: 5
8: 5.1
Stateless Codec Controls
vp9_frame_decode_parameters 0x00a40a2c (unknown): type=261 flags=has-payload
vp9_probabilities_updates 0x00a40a2d (unknown): type=260 flags=has-payload
hevc_sequence_parameter_set 0x00a40a90 (unknown): type=270 flags=has-payload
hevc_picture_parameter_set 0x00a40a91 (unknown): type=271 flags=has-payload
hevc_scaling_matrix 0x00a40a93 (unknown): type=273 flags=has-payload
hevc_decode_parameters 0x00a40a94 (unknown): type=274 flags=has-payload
hevc_decode_mode 0x00a40a95 (menu) : min=1 max=1 default=1 value=1
1: Frame-Based
hevc_start_code 0x00a40a96 (menu) : min=1 max=1 default=1 value=1
1: Annex B Start Code
Mine looks like:
# v4l2-ctl --all -d 1
Driver Info:
Driver name : hantro-vpu
Card type : nxp,imx8mq-vpu-g2-dec
Bus info : platform: hantro-vpu
Driver version : 5.18.0
Capabilities : 0x84204000
Video Memory-to-Memory Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04204000
Video Memory-to-Memory Multiplanar
Streaming
Extended Pix Format
Media Driver Info:
Driver name : hantro-vpu
Model : hantro-vpu
Serial :
Bus info : platform: hantro-vpu
Media version : 5.18.0
Hardware revision: 0x00000000 (0)
Driver version : 5.18.0
Interface Info:
ID : 0x0300000c
Type : V4L Video
Entity Info:
ID : 0x00000001 (1)
Name : nxp,imx8mq-vpu-g2-dec-source
Function : V4L2 I/O
Pad 0x01000002 : 0: Source
Link 0x02000008: to remote pad 0x1000004 of entity
'nxp,imx8mq-vpu-g2-dec-proc': Data, Enabled, Immutable
Priority: 2
Format Video Capture Multiplanar:
Width/Height : 48/48
Pixel Format : 'VT12' (Y/CbCr 4:2:0 (4x4 Linear))
Field : None
Number of planes : 1
Flags :
Colorspace : JPEG
Transfer Function : Default
YCbCr/HSV Encoding: Default
Quantization : Default
Plane 0 :
Bytes per Line : 48
Size Image : 3600
Format Video Output Multiplanar:
Width/Height : 48/48
Pixel Format : 'S265' (HEVC Parsed Slice Data)
Field : None
Number of planes : 1
Flags :
Colorspace : JPEG
Transfer Function : Default
YCbCr/HSV Encoding: Default
Quantization : Default
Plane 0 :
Bytes per Line : 0
Size Image : 4608
User Controls
hantro_hevc_slice_header_skip_b 0x00981a80 (int) : min=0 max=256
step=1 default=0 value=0
Codec Controls
hevc_profile 0x00990b67 (menu) : min=0 max=2
default=0 value=0
0: Main
1: Main Still Picture
2: Main 10
hevc_level 0x00990b68 (menu) : min=0 max=8
default=0 value=0
0: 1
1: 2
2: 2.1
3: 3
4: 3.1
5: 4
6: 4.1
7: 5
8: 5.1
Stateless Codec Controls
vp9_frame_decode_parameters 0x00a40a2c (unknown): type=261 flags=has-payload
vp9_probabilities_updates 0x00a40a2d (unknown): type=260 flags=has-payload
hevc_sequence_parameter_set 0x00a40a90 (unknown): type=270 flags=has-payload
hevc_picture_parameter_set 0x00a40a91 (unknown): type=271 flags=has-payload
hevc_scaling_matrix 0x00a40a93 (unknown): type=273 flags=has-payload
hevc_decode_parameters 0x00a40a94 (unknown): type=274 flags=has-payload
hevc_decode_mode 0x00a40a95 (menu) : min=1 max=1
default=1 value=1
1: Frame-Based
hevc_start_code 0x00a40a96 (menu) : min=1 max=1
default=1 value=1
1: Annex B Start Code
It is the same so that suggest the issue is coming from GStreamer plugin.
Benjamin
adam
Benjamin
adam
adam
Regards,
Benjamin
adam
Thanks,
Benjamin
Benjamin
Benjamin Gaignard (12):
media: uapi: HEVC: Add missing fields in HEVC controls
media: uapi: HEVC: Rename HEVC stateless controls with STATELESS
prefix
media: uapi: HEVC: Add document uAPI structure
media: uapi: HEVC: Define V4L2_CID_STATELESS_HEVC_SLICE_PARAMS
as a
dynamic array
media: uapi: Move parsed HEVC pixel format out of staging
media: uapi: Add V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS
control
media: uapi: Move the HEVC stateless control type out of staging
media: controls: Log HEVC stateless control in .std_log
media: uapi: Create a dedicated header for Hantro control
media: uapi: HEVC: fix padding in v4l2 control structures
media: uapi: Change data_bit_offset definition
media: uapi: move HEVC stateless controls out of staging
Hans Verkuil (3):
videodev2.h: add V4L2_CTRL_FLAG_DYNAMIC_ARRAY
v4l2-ctrls: add support for dynamically allocated arrays.
vivid: add dynamic array test control
.../userspace-api/media/drivers/hantro.rst | 5 -
.../media/v4l/ext-ctrls-codec-stateless.rst | 833
++++++++++++++++++
.../media/v4l/ext-ctrls-codec.rst | 780
----------------
.../media/v4l/pixfmt-compressed.rst | 7 +-
.../media/v4l/vidioc-g-ext-ctrls.rst | 20 +
.../media/v4l/vidioc-queryctrl.rst | 8 +
.../media/videodev2.h.rst.exceptions | 5 +
.../media/test-drivers/vivid/vivid-ctrls.c | 15 +
drivers/media/v4l2-core/v4l2-ctrls-api.c | 103 ++-
drivers/media/v4l2-core/v4l2-ctrls-core.c | 198 ++++-
drivers/media/v4l2-core/v4l2-ctrls-defs.c | 37 +-
drivers/media/v4l2-core/v4l2-ctrls-priv.h | 3 +-
drivers/media/v4l2-core/v4l2-ctrls-request.c | 13 +-
drivers/staging/media/hantro/hantro_drv.c | 27 +-
drivers/staging/media/hantro/hantro_hevc.c | 8 +-
drivers/staging/media/sunxi/cedrus/cedrus.c | 24 +-
.../staging/media/sunxi/cedrus/cedrus_dec.c | 10 +-
.../staging/media/sunxi/cedrus/cedrus_h265.c | 2 +-
include/media/hevc-ctrls.h | 250 ------
include/media/v4l2-ctrls.h | 48 +-
include/uapi/linux/hantro-media.h | 19 +
include/uapi/linux/v4l2-controls.h | 439 +++++++++
include/uapi/linux/videodev2.h | 13 +
23 files changed, 1697 insertions(+), 1170 deletions(-)
delete mode 100644 include/media/hevc-ctrls.h
create mode 100644 include/uapi/linux/hantro-media.h
