From: Jonas Karlman <jonas@xxxxxxxxx>
The width and height in macroblocks is currently configured based on OUTPUT
buffer resolution, this works for frame pictures but can cause issues for
field pictures.
When frame_mbs_only_flag is 0 the height in mbs should be height of
the field instead of height of frame.
Validate pic_width_in_mbs_minus1 and pic_height_in_map_units_minus1
against OUTPUT buffer resolution and use these values to configure HW.
Signed-off-by: Jonas Karlman <jonas@xxxxxxxxx>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@xxxxxxxxxxxxx>
Reviewed-by: Sebastian Fricke <sebastian.fricke@xxxxxxxxxxxxx>
---
drivers/staging/media/rkvdec/rkvdec-h264.c | 4 ++--
drivers/staging/media/rkvdec/rkvdec.c | 10 ++++++++++
2 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/media/rkvdec/rkvdec-h264.c b/drivers/staging/media/rkvdec/rkvdec-h264.c
index 8d44a884a52e..a42cf19bcc6d 100644
--- a/drivers/staging/media/rkvdec/rkvdec-h264.c
+++ b/drivers/staging/media/rkvdec/rkvdec-h264.c
@@ -672,8 +672,8 @@ static void assemble_hw_pps(struct rkvdec_ctx *ctx,
LOG2_MAX_PIC_ORDER_CNT_LSB_MINUS4);
WRITE_PPS(!!(sps->flags & V4L2_H264_SPS_FLAG_DELTA_PIC_ORDER_ALWAYS_ZERO),
DELTA_PIC_ORDER_ALWAYS_ZERO_FLAG);
- WRITE_PPS(DIV_ROUND_UP(ctx->coded_fmt.fmt.pix_mp.width, 16), PIC_WIDTH_IN_MBS);
- WRITE_PPS(DIV_ROUND_UP(ctx->coded_fmt.fmt.pix_mp.height, 16), PIC_HEIGHT_IN_MBS);
+ WRITE_PPS(sps->pic_width_in_mbs_minus1 + 1, PIC_WIDTH_IN_MBS);
+ WRITE_PPS(sps->pic_height_in_map_units_minus1 + 1, PIC_HEIGHT_IN_MBS);
WRITE_PPS(!!(sps->flags & V4L2_H264_SPS_FLAG_FRAME_MBS_ONLY),
FRAME_MBS_ONLY_FLAG);
WRITE_PPS(!!(sps->flags & V4L2_H264_SPS_FLAG_MB_ADAPTIVE_FRAME_FIELD),
diff --git a/drivers/staging/media/rkvdec/rkvdec.c b/drivers/staging/media/rkvdec/rkvdec.c
index 2df8cf4883e2..1b805710e195 100644
--- a/drivers/staging/media/rkvdec/rkvdec.c
+++ b/drivers/staging/media/rkvdec/rkvdec.c
@@ -29,8 +29,11 @@
static int rkvdec_try_ctrl(struct v4l2_ctrl *ctrl)
{
+ struct rkvdec_ctx *ctx = container_of(ctrl->handler, struct rkvdec_ctx, ctrl_hdl);
+
if (ctrl->id == V4L2_CID_STATELESS_H264_SPS) {
const struct v4l2_ctrl_h264_sps *sps = ctrl->p_new.p_h264_sps;
+ unsigned int width, height;
/*
* TODO: The hardware supports 10-bit and 4:2:2 profiles,
* but it's currently broken in the driver.
@@ -45,6 +48,13 @@ static int rkvdec_try_ctrl(struct v4l2_ctrl *ctrl)
if (sps->bit_depth_luma_minus8 != 0)
/* Only 8-bit is supported */
return -EINVAL;
+
+ width = (sps->pic_width_in_mbs_minus1 + 1) * 16;
+ height = (sps->pic_height_in_map_units_minus1 + 1) * 16;
+
+ if (width > ctx->coded_fmt.fmt.pix_mp.width ||
+ height > ctx->coded_fmt.fmt.pix_mp.height)
+ return -EINVAL;
}
return 0;
}
--
2.34.1
