Hi Hans,
Thanks for your quick feedback.
Any other suggestions guys ? .
Thanks in advance.
Hamza Ferrag.
On 13/07/2010 20:57, Hans Houwaard wrote:
I don't really know why, but it happens sometimes on my machine with the
same card as well. When I have problems, I power off the computer and
then restart it again. The card will not properly load or function
untill I do. There is probably some hardware lock that needs to be reset
by powering off the card.
The loading of the firmware sometimes takes a couple of seconds in my
machine, it's not very fast. Besides check if the card, which is on a
PCI-1x slot, doesn't share an IRQ with the onboard soundcard. That will
seriously effect the performance of both the card and the sound.
Good luck,
Hans
Op 13-07-10 20:28, Hamza Ferrag schreef:
Hi all,
I am trying to install a 'Tevii S470' card from TeVii technology as
described here http://linuxtv.org/wiki/index.php/TeVii_S470.
My configuration is :
- intel x86 platform
- Kernel 2.6.27-21
- tevii_ds3000.tar.gz (firmware archive from
http://tevii.com/tevii_ds3000.tar.gz ),
- s2-liplianin mercurial sources ( from
http://mercurial.intuxication.org/hg/s2-liplianin)last changes at
05/29/2010,
All work fine i.e drivers/firmware installation after madprobe a right
modules.
# lsmod
Module Size Used by Not tainted
cx23885 82416 0
tveeprom 9348 1 cx23885
btcx_risc 1928 1 cx23885
cx2341x 7748 1 cx23885
ir_common 23936 1 cx23885
videobuf_dma_sg 5060 1 cx23885
ir_core 3596 2 cx23885,ir_common
v4l2_common 8896 2 cx23885,cx2341x
videodev 25376 2 cx23885,v4l2_common
videobuf_dvb 2820 1 cx23885
videobuf_core 8388 3 cx23885,videobuf_dma_sg,videobuf_dvb
lnbp21 1024 0
dvb_core 54832 2 cx23885,videobuf_dvb
ds3000 9668 1
# dmesg
Linux video capture interface: v2.00
cx23885 driver version 0.0.2 loaded
CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470
[card=15,autodetected]
cx23885_dvb_register() allocating 1 frontend(s)
cx23885[0]: cx23885 based dvb card
DS3000 chip version: 0.192 attached.
DVB: registering new adapter (cx23885[0])
DVB: registering adapter 0 frontend 0 (Montage Technology
DS3000/TS2020)...
cx23885_dev_checkrevision() Hardware revision = 0xb0
cx23885[0]/0: found at 0000:03:00.0, rev: 2, irq: 11, latency: 0,
mmio: 0xdf800000
cx23885 0000:03:00.0: setting latency timer to 64
tun: Universal TUN/TAP device driver, 1.6
A problem appear when tunning card using szap-s2 :
# szap-s2 szap-s2 -c /root/channels.conf -x -M 5 -C 89 -l 9750 -S 1 MyCh
reading channels from file '/root/channels.conf'
zapping to 1 'MyCh':
delivery DVB-S2, modulation 8PSK
sat 0, frequency 8420 MHz V, symbolrate 29400000, coderate 8/9,rolloff
0.35
vpid 0x0286, apid 0x1fff, sid 0x0000
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
ds3000_firmware_ondemand: Waiting for firmware upload
(dvb-fe-ds3000.fw)...
firmware: requesting dvb-fe-ds3000.fw
ds3000_firmware_ondemand: Waiting for firmware upload(2)...
ds3000_firmware_ondemand: No firmware uploaded (timeout or file not
found?)
ds3000_tune: Unable initialise the firmware
Apparently it can't locate a firmware file, yet :
# ls -l /lib/firmware/
-rwxr-xr-x 1 root root 8192 May 3 07:09 dvb-fe-ds3000.fw
Any ideas why this happens?
Thanks and best regards,
Hamza Ferrag
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
