The device number is currently a value that needs to be the same on two separate tables, but the code doesn't actually enforce it, leading to errors as boards get added or removed. Fix it by using an enum. Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx> --- To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH 00/26] at: https://lore.kernel.org/all/cover.1648499509.git.mchehab@xxxxxxxxxx/ drivers/media/usb/dvb-usb/gp8psk.c | 36 +++++++++++++++++++----------- 1 file changed, 23 insertions(+), 13 deletions(-) diff --git a/drivers/media/usb/dvb-usb/gp8psk.c b/drivers/media/usb/dvb-usb/gp8psk.c index b4f661bb5648..b2b27a86dfe5 100644 --- a/drivers/media/usb/dvb-usb/gp8psk.c +++ b/drivers/media/usb/dvb-usb/gp8psk.c @@ -310,15 +310,25 @@ static int gp8psk_usb_probe(struct usb_interface *intf, return ret; } -static struct usb_device_id gp8psk_usb_table [] = { - { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_1_COLD) }, - { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_1_WARM) }, - { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_2) }, - { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_1) }, - { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_2) }, -/* { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_CW3K) }, */ - { 0 }, +enum { + GENPIX_8PSK_REV_1_COLD, + GENPIX_8PSK_REV_1_WARM, + GENPIX_8PSK_REV_2, + GENPIX_SKYWALKER_1, + GENPIX_SKYWALKER_2, + GENPIX_SKYWALKER_CW3K, }; + +static struct usb_device_id gp8psk_usb_table[] = { + DVB_USB_DEV(GENPIX, GENPIX_8PSK_REV_1_COLD), + DVB_USB_DEV(GENPIX, GENPIX_8PSK_REV_1_WARM), + DVB_USB_DEV(GENPIX, GENPIX_8PSK_REV_2), + DVB_USB_DEV(GENPIX, GENPIX_SKYWALKER_1), + DVB_USB_DEV(GENPIX, GENPIX_SKYWALKER_2), + DVB_USB_DEV(GENPIX, GENPIX_SKYWALKER_CW3K), + { } +}; + MODULE_DEVICE_TABLE(usb, gp8psk_usb_table); static struct dvb_usb_device_properties gp8psk_properties = { @@ -355,20 +365,20 @@ static struct dvb_usb_device_properties gp8psk_properties = { .num_device_descs = 4, .devices = { { .name = "Genpix 8PSK-to-USB2 Rev.1 DVB-S receiver", - .cold_ids = { &gp8psk_usb_table[0], NULL }, - .warm_ids = { &gp8psk_usb_table[1], NULL }, + .cold_ids = { &gp8psk_usb_table[GENPIX_8PSK_REV_1_COLD], NULL }, + .warm_ids = { &gp8psk_usb_table[GENPIX_8PSK_REV_1_WARM], NULL }, }, { .name = "Genpix 8PSK-to-USB2 Rev.2 DVB-S receiver", .cold_ids = { NULL }, - .warm_ids = { &gp8psk_usb_table[2], NULL }, + .warm_ids = { &gp8psk_usb_table[GENPIX_8PSK_REV_2], NULL }, }, { .name = "Genpix SkyWalker-1 DVB-S receiver", .cold_ids = { NULL }, - .warm_ids = { &gp8psk_usb_table[3], NULL }, + .warm_ids = { &gp8psk_usb_table[GENPIX_SKYWALKER_1], NULL }, }, { .name = "Genpix SkyWalker-2 DVB-S receiver", .cold_ids = { NULL }, - .warm_ids = { &gp8psk_usb_table[4], NULL }, + .warm_ids = { &gp8psk_usb_table[GENPIX_SKYWALKER_2], NULL }, }, { NULL }, } -- 2.35.1
