The ov5645 driver reports as its unique supported format
MEDIA_BUS_FMT_UYVY8_2X8, which is not correct as the sensor
uses the MIPI CSI-2 serial bus.
Fix that by using MEDIA_BUS_FMT_UYVY8_1X16 instead.
Signed-off-by: Jacopo Mondi <jacopo@xxxxxxxxxx>
---
drivers/media/i2c/ov5645.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c
index 368fa21e675e..5720e74e843b 100644
--- a/drivers/media/i2c/ov5645.c
+++ b/drivers/media/i2c/ov5645.c
@@ -843,7 +843,7 @@ static int ov5645_enum_mbus_code(struct v4l2_subdev *sd,
if (code->index > 0)
return -EINVAL;
- code->code = MEDIA_BUS_FMT_UYVY8_2X8;
+ code->code = MEDIA_BUS_FMT_UYVY8_1X16;
return 0;
}
@@ -852,7 +852,7 @@ static int ov5645_enum_frame_size(struct v4l2_subdev *subdev,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_frame_size_enum *fse)
{
- if (fse->code != MEDIA_BUS_FMT_UYVY8_2X8)
+ if (fse->code != MEDIA_BUS_FMT_UYVY8_1X16)
return -EINVAL;
if (fse->index >= ARRAY_SIZE(ov5645_mode_info_data))
@@ -948,7 +948,7 @@ static int ov5645_set_format(struct v4l2_subdev *sd,
format->which);
__format->width = __crop->width;
__format->height = __crop->height;
- __format->code = MEDIA_BUS_FMT_UYVY8_2X8;
+ __format->code = MEDIA_BUS_FMT_UYVY8_1X16;
__format->field = V4L2_FIELD_NONE;
__format->colorspace = V4L2_COLORSPACE_SRGB;
--
2.35.1
