Hi Rob, Thank you for the review. On Mon, Feb 7, 2022 at 10:39 PM Rob Herring <robh@xxxxxxxxxx> wrote: > > On Fri, Jan 21, 2022 at 01:05:41AM +0000, Lad Prabhakar wrote: > > Document the CRU block found on Renesas RZ/G2L SoC's. > > > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> > > --- > > v1->v2 > > * Dropped CSI > > --- > > .../bindings/media/renesas,rzg2l-cru.yaml | 152 ++++++++++++++++++ > > 1 file changed, 152 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml > > > > diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml > > new file mode 100644 > > index 000000000000..a03fc6ef0117 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml > > @@ -0,0 +1,152 @@ > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > > +# Copyright (C) 2022 Renesas Electronics Corp. > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/media/renesas,rzg2l-cru.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Renesas RZ/G2L Camera Data Receiving Unit (CRU) > > + > > +maintainers: > > + - Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> > > + > > +description: > > + The RZ/G2L Camera Data Receiving Unit (CRU) device provides video input > > + capabilities for the Renesas RZ/G2L family of devices. > > + > > + Depending on the instance the Image Processing input is connected to > > + external SoC pins or to a CSI-2 receiver. > > + > > +properties: > > + compatible: > > + oneOf: > > + - items: > > Don't need oneOf when there is only 1 entry. > There are two more SoC's to be added as soon this patch series get merged, so to keep the changes minimal later I will keep oneOf here. > > + - enum: > > + - renesas,r9a07g044-cru # RZ/G2{L,LC} > > + - const: renesas,rzg2l-cru > > + > > + reg: > > + maxItems: 1 > > + > > + interrupts: > > + maxItems: 3 > > + > > + interrupt-names: > > + items: > > + - const: image_conv > > + - const: image_conv_err > > + - const: axi_mst_err > > + > > + clocks: > > + items: > > + - description: CRU Main clock > > + - description: CPU Register access clock > > + - description: CRU image transfer clock > > + > > + clock-names: > > + items: > > + - const: vclk > > + - const: pclk > > + - const: aclk > > + > > + power-domains: > > + maxItems: 1 > > + > > + resets: > > + items: > > + - description: CRU_PRESETN reset terminal > > + - description: CRU_ARESETN reset terminal > > + > > + reset-names: > > + items: > > + - const: presetn > > + - const: aresetn > > + > > + ports: > > + $ref: /schemas/graph.yaml#/properties/ports > > + > > + properties: > > + port@0: > > + $ref: /schemas/graph.yaml#/$defs/port-base > > + unevaluatedProperties: false > > + description: > > + Input port node, single endpoint describing a parallel input source. > > + > > + properties: > > + endpoint: > > + $ref: video-interfaces.yaml# > > + unevaluatedProperties: false > > + > > + properties: > > + hsync-active: true > > + vsync-active: true > > + bus-width: true > > + data-shift: true > > + > > + port@1: > > + $ref: /schemas/graph.yaml#/properties/port > > + description: > > + Output port node, describing the RZ/G2L Image Processing module > > + connected the CSI-2 receiver > > > + > > + properties: > > + endpoint@0: > > + $ref: /schemas/graph.yaml#/properties/endpoint > > + description: Endpoint connected to CSI2. > > + > > + anyOf: > > + - required: > > + - endpoint@0 > > You can drop all the endpoint stuff. Just 'endpoint' should be valid as > well for example. The graph schema covers all that. > Will do. Cheers, Prabhakar > > + > > +required: > > + - compatible > > + - reg > > + - interrupts > > + - interrupt-names > > + - clocks > > + - clock-names > > + - resets > > + - reset-names > > + - power-domains > > + > > +additionalProperties: false > > + > > +examples: > > + # Device node example with CSI-2 > > + - | > > + #include <dt-bindings/clock/r9a07g044-cpg.h> > > + #include <dt-bindings/interrupt-controller/arm-gic.h> > > + > > + cru: video@10830000 { > > + compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru"; > > + reg = <0x10830000 0x400>; > > + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-names = "image_conv", "image_conv_err", "axi_mst_err"; > > + clocks = <&cpg CPG_MOD R9A07G044_CRU_VCLK>, > > + <&cpg CPG_MOD R9A07G044_CRU_PCLK>, > > + <&cpg CPG_MOD R9A07G044_CRU_ACLK>; > > + clock-names = "vclk", "pclk", "aclk"; > > + power-domains = <&cpg>; > > + resets = <&cpg R9A07G044_CRU_PRESETN>, > > + <&cpg R9A07G044_CRU_ARESETN>; > > + reset-names = "presetn", "aresetn"; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@1 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + reg = <1>; > > + > > + crucsi2: endpoint@0 { > > + reg = <0>; > > + remote-endpoint= <&csi2cru>; > > + }; > > + }; > > + }; > > + }; > > -- > > 2.17.1 > > > >
