Re: [PATCH v2 1/8] media: dt-bindings: i2c: Document ov5670

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Krzysztof,

On Tue, Mar 15, 2022 at 08:32:58AM +0100, Krzysztof Kozlowski wrote:
> On 14/03/2022 17:27, Jacopo Mondi wrote:
> > Provide the bindings documentation for Omnivision OV5670 image sensor.
> >
> > Signed-off-by: Jacopo Mondi <jacopo@xxxxxxxxxx>
> >
> > ---
> > v1->v2 (comments from Krzysztof)
> >
> > - Rename to include manufacturer name
> > - Add entry to MAINTAINERS
> > - Add maxItems: to -gpios properties
> > - Use common clock properties
> > - Use enum: [1, 2] for data lanes
> > - Fix whitespace issue in example
> > ---
> >
> >  .../bindings/media/i2c/ovti,ov5670.yaml       | 99 +++++++++++++++++++
> >  MAINTAINERS                                   |  1 +
> >  2 files changed, 100 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov5670.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5670.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5670.yaml
> > new file mode 100644
> > index 000000000000..73cf72203f17
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5670.yaml
> > @@ -0,0 +1,99 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/i2c/ovti,ov5670.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Omnivision OV5670 5 Megapixels raw image sensor
> > +
> > +maintainers:
> > +  - Jacopo Mondi <jacopo@xxxxxxxxxx>
> > +
> > +description: |-
> > +  The OV5670 is a 5 Megapixels raw image sensor which provides images in 10-bits
> > +  RAW BGGR Bayer format on a 2 data lanes MIPI CSI-2 serial interface and is
> > +  controlled through an I2C compatible control bus.
> > +
> > +properties:
> > +  compatible:
> > +    const: ovti,ov5670
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  assigned-clocks: true
> > +  assigned-clock-parents: true
> > +  assigned-clock-rates: true
>
> You should not need these. These are coming with schema. You can add
> these to example schema below and double-check.
>

Thanks, I'll try removing and see how it works

> > +
> > +  clocks:
> > +    description: System clock. From 6 to 27 MHz.
> > +    maxItems: 1
> > +
> > +  pwdn-gpios:
> > +    description: Reference to the GPIO connected to the PWDNB pin. Active low.
>
> This does not look like a standard property, so you need a vendor prefix.
>

$ git grep powerdown-gpio arch/arm*/boot/dts | wc -l
48

$ git grep pwdn-gpio arch/arm*/boot/dts | wc -l
5

I'll go with the majority.

I wonder however if 'standard' proeprties are documented somewhere.

Thanks
  j


> > +    maxItems: 1
> > +
>
> Best regards,
> Krzysztof



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux