Switch to using runtime PM for power management.
Signed-off-by: Paul Elder <paul.elder@xxxxxxxxxxxxxxxx>
---
Changes in v2:
- replace manual tracking of power status with pm_runtime_get_if_in_use
- power on the sensor before reading the checking the chip id
- add dependency on PM to Kconfig
---
drivers/media/i2c/Kconfig | 1 +
drivers/media/i2c/ov5640.c | 112 ++++++++++++++++++++++---------------
2 files changed, 67 insertions(+), 46 deletions(-)
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index e7194c1be4d2..97c3611d9304 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -1025,6 +1025,7 @@ config VIDEO_OV5640
tristate "OmniVision OV5640 sensor support"
depends on OF
depends on GPIOLIB && VIDEO_V4L2 && I2C
+ depends on PM
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 4de83d0ef85d..454ffd3c6d59 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/types.h>
@@ -445,8 +446,6 @@ struct ov5640_dev {
/* lock to protect all members below */
struct mutex lock;
- int power_count;
-
struct v4l2_mbus_framefmt fmt;
bool pending_fmt_change;
@@ -2693,37 +2692,6 @@ static int ov5640_set_power(struct ov5640_dev *sensor, bool on)
/* --------------- Subdev Operations --------------- */
-static int ov5640_s_power(struct v4l2_subdev *sd, int on)
-{
- struct ov5640_dev *sensor = to_ov5640_dev(sd);
- int ret = 0;
-
- mutex_lock(&sensor->lock);
-
- /*
- * If the power count is modified from 0 to != 0 or from != 0 to 0,
- * update the power state.
- */
- if (sensor->power_count == !on) {
- ret = ov5640_set_power(sensor, !!on);
- if (ret)
- goto out;
- }
-
- /* Update the power count. */
- sensor->power_count += on ? 1 : -1;
- WARN_ON(sensor->power_count < 0);
-out:
- mutex_unlock(&sensor->lock);
-
- if (on && !ret && sensor->power_count == 1) {
- /* restore controls */
- ret = v4l2_ctrl_handler_setup(&sensor->ctrls.handler);
- }
-
- return ret;
-}
-
static int ov5640_try_frame_interval(struct ov5640_dev *sensor,
struct v4l2_fract *fi,
u32 width, u32 height)
@@ -3288,6 +3256,9 @@ static int ov5640_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
/* v4l2_ctrl_lock() locks our own mutex */
+ if (!pm_runtime_get_if_in_use(&sensor->i2c_client->dev))
+ return 0;
+
switch (ctrl->id) {
case V4L2_CID_AUTOGAIN:
val = ov5640_get_gain(sensor);
@@ -3303,6 +3274,8 @@ static int ov5640_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
break;
}
+ pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
+
return 0;
}
@@ -3334,7 +3307,7 @@ static int ov5640_s_ctrl(struct v4l2_ctrl *ctrl)
* not apply any controls to H/W at this time. Instead
* the controls will be restored right after power-up.
*/
- if (sensor->power_count == 0)
+ if (!pm_runtime_get_if_in_use(&sensor->i2c_client->dev))
return 0;
switch (ctrl->id) {
@@ -3376,6 +3349,8 @@ static int ov5640_s_ctrl(struct v4l2_ctrl *ctrl)
break;
}
+ pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
+
return ret;
}
@@ -3657,6 +3632,12 @@ static int ov5640_s_stream(struct v4l2_subdev *sd, int enable)
struct ov5640_dev *sensor = to_ov5640_dev(sd);
int ret = 0;
+ if (enable) {
+ ret = pm_runtime_resume_and_get(&sensor->i2c_client->dev);
+ if (ret < 0)
+ return ret;
+ }
+
mutex_lock(&sensor->lock);
if (sensor->streaming == !enable) {
@@ -3681,8 +3662,13 @@ static int ov5640_s_stream(struct v4l2_subdev *sd, int enable)
if (!ret)
sensor->streaming = enable;
}
+
out:
mutex_unlock(&sensor->lock);
+
+ if (!enable || ret)
+ pm_runtime_put(&sensor->i2c_client->dev);
+
return ret;
}
@@ -3704,7 +3690,6 @@ static int ov5640_init_cfg(struct v4l2_subdev *sd,
}
static const struct v4l2_subdev_core_ops ov5640_core_ops = {
- .s_power = ov5640_s_power,
.log_status = v4l2_ctrl_subdev_log_status,
.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
.unsubscribe_event = v4l2_event_subdev_unsubscribe,
@@ -3750,15 +3735,11 @@ static int ov5640_check_chip_id(struct ov5640_dev *sensor)
int ret = 0;
u16 chip_id;
- ret = ov5640_set_power_on(sensor);
- if (ret)
- return ret;
-
ret = ov5640_read_reg16(sensor, OV5640_REG_CHIP_ID, &chip_id);
if (ret) {
dev_err(&client->dev, "%s: failed to read chip identifier\n",
__func__);
- goto power_off;
+ return ret;
}
if (chip_id != 0x5640) {
@@ -3767,8 +3748,6 @@ static int ov5640_check_chip_id(struct ov5640_dev *sensor)
ret = -ENXIO;
}
-power_off:
- ov5640_set_power_off(sensor);
return ret;
}
@@ -3863,20 +3842,35 @@ static int ov5640_probe(struct i2c_client *client)
mutex_init(&sensor->lock);
- ret = ov5640_check_chip_id(sensor);
+ ret = ov5640_init_controls(sensor);
if (ret)
goto entity_cleanup;
- ret = ov5640_init_controls(sensor);
+ ret = ov5640_set_power(sensor, true);
if (ret)
- goto entity_cleanup;
+ goto free_ctrls;
+
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+ pm_runtime_get(dev);
+
+ ret = ov5640_check_chip_id(sensor);
+ if (ret)
+ goto err_pm_runtime;
ret = v4l2_async_register_subdev_sensor(&sensor->sd);
if (ret)
- goto free_ctrls;
+ goto err_pm_runtime;
+
+ pm_runtime_set_autosuspend_delay(dev, 1000);
+ pm_runtime_use_autosuspend(dev);
+ pm_runtime_put_autosuspend(dev);
return 0;
+err_pm_runtime:
+ pm_runtime_disable(dev);
+ pm_runtime_put_noidle(dev);
free_ctrls:
v4l2_ctrl_handler_free(&sensor->ctrls.handler);
entity_cleanup:
@@ -3898,6 +3892,31 @@ static int ov5640_remove(struct i2c_client *client)
return 0;
}
+static int __maybe_unused ov5640_sensor_suspend(struct device *dev)
+{
+ struct v4l2_subdev *sd = dev_get_drvdata(dev);
+ struct ov5640_dev *ov5640 = to_ov5640_dev(sd);
+
+ return ov5640_set_power(ov5640, false);
+}
+
+static int __maybe_unused ov5640_sensor_resume(struct device *dev)
+{
+ struct v4l2_subdev *sd = dev_get_drvdata(dev);
+ struct ov5640_dev *ov5640 = to_ov5640_dev(sd);
+ int ret;
+
+ ret = ov5640_set_power(ov5640, true);
+ if (ret)
+ return ret;
+
+ return v4l2_ctrl_handler_setup(&ov5640->ctrls.handler);
+}
+
+static const struct dev_pm_ops ov5640_pm_ops = {
+ SET_RUNTIME_PM_OPS(ov5640_sensor_suspend, ov5640_sensor_resume, NULL)
+};
+
static const struct i2c_device_id ov5640_id[] = {
{"ov5640", 0},
{},
@@ -3914,6 +3933,7 @@ static struct i2c_driver ov5640_i2c_driver = {
.driver = {
.name = "ov5640",
.of_match_table = ov5640_dt_ids,
+ .pm = &ov5640_pm_ops,
},
.id_table = ov5640_id,
.probe_new = ov5640_probe,
--
2.30.2
