Hi Dave, On 10/03/2022 16:50, Dave Stevenson wrote: > Hi Benjamin > > On Thu, 10 Mar 2022 at 15:15, Benjamin Mugnier > <benjamin.mugnier@xxxxxxxxxxx> wrote: >> >> Hi Kieran, >> >> On 10/03/2022 14:52, Kieran Bingham wrote: >>> Hi Benjamin, >>> >>> Thank you for the patch - >>> >>> Quoting Benjamin Mugnier (2022-03-10 13:32:55) >>>> The VGXY61 has a quad lanes CSI-2 output port running at 800mbps per >>>> lane, and supports RAW8, RAW10, RAW12, RAW14 and RAW16 formats. >>>> The driver handles both sensor types: >>>> - VG5661 and VG6661: 1.6 Mpx (1464 x 1104) 75fps. >>>> - VG5761 and VG6761: 2.3 Mpx (1944 x 1204) 60 fps. >>>> The driver supports: >>>> - HDR linearize mode, HDR substraction mode, and no HDR >>>> - GPIOs LEDs strobing >>>> - Digital binning and analog subsampling >>>> - Horizontal and vertical flip >>>> - Manual exposure >>>> - Analog and digital gains >>>> - Test patterns >>> >>> I haven't reviewed the driver directly yet, but I have a script which >>> looks for key requirements for libcamera. >>> (https://git.linuxtv.org/libcamera.git/tree/Documentation/sensor_driver_requirements.rst) >>> >>> >>> Media Controller Support: >>> - V4L2_SUBDEV_FL_HAS_DEVNODE : found >>> - MEDIA_ENT_F_CAM_SENSOR : found >>> >>> Mandatory Controls: >>> - V4L2_CID_EXPOSURE : found >>> - V4L2_CID_HBLANK : -------- >>> - V4L2_CID_VBLANK : -------- >>> - V4L2_CID_PIXEL_RATE : found >>> >>> Selection Controls (will become mandatory): >>> - V4L2_SEL_TGT_CROP_DEFAULT : -------- >>> - V4L2_SEL_TGT_CROP : -------- >>> - V4L2_SEL_TGT_CROP_BOUNDS : -------- >>> - .get_selection : -------- >>> >>> Optional Controls: >>> - V4L2_CID_TEST_PATTERN : found >>> - V4L2_CID_GAIN : -------- >>> - V4L2_CID_ANALOGUE_GAIN : found >>> - V4L2_CID_CAMERA_SENSOR_ROTATION : -------- >>> - V4L2_CID_CAMERA_ORIENTATION : -------- >>> >>> >>> The key missing pieces are HBLANK/VBLANK and the .get_selection API. Is >>> it easy/feasible to add these? >>> >> >> The .get_selection API should be easy. >> Unfortunately, this device does not have registers for HBLANK/VBLANK. I may be able to compute them for a read only control, but it will be harder to set. Is the read only control enough for libcamera? >> >> My next goal is to run this sensor on a Raspberry Pi through libcamera. As I'm fairly new to libcamera it may take some time. My initial idea was to submit libcamera related changes in another set of patches once done, so I could test the entire stack and make extra adjustements and fixes to the driver that I'm not aware of yet. What do you think? > > Sounds fun :-) Shout if you need any assistance. > I won't hesitate, thank you :) > The Pi pipeline handler only supports VBLANK/HBLANK for frame rate > control, so implementing the frame_interval ops is a dead end. > Currently it only supports varying VBLANK for frame rate control, but > in theory variable HBLANK could also be supported (IIRC Sony > IMX290/327 varies HBLANK by default). > > As I commented in my other reply, the docs say that raw sensors should > use these as they don't have a high level control for frame rate. > > Your registers DEVICE_LINE_LENGTH and DEVICE_FRAME_LENGTH look to be > exactly the settings that map onto HBLANK and VBLANK respectively, but > with a need to subtract the active frame width / height from the > value. > Drop all the frame_interval stuff and add the HBLANK (ro) and VBLANK > controls. If you look at imx219 or similar you'll see the handling of > setting VBLANK then adjusting the max value for the exposure control. > > There are very few things that libcamera needs over and above a > standard sensor driver, so IMHO there's little point in deferring > implementing them. Perfect, thank you for your explanation. The imx219 seems to be what I'm looking for. I'll implement HBLANK and VBLANK the same way. I'm currently looking at your review from the other thread. Regards, Benjamin > > Dave > >> Regards, >> >> Benjamin >> >>> -- >>> Regards >>> >>> Kieran >>> >>> >>>> >>>> Signed-off-by: Benjamin Mugnier <benjamin.mugnier@xxxxxxxxxxx> >>>> --- >>>> drivers/media/i2c/Kconfig | 11 + >>>> drivers/media/i2c/Makefile | 1 + >>>> drivers/media/i2c/st-vgxy61.c | 1919 +++++++++++++++++++++++++++++++++ >>>> 3 files changed, 1931 insertions(+) >>>> create mode 100644 drivers/media/i2c/st-vgxy61.c >>>> >>>> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig >>>> index fe66093b8849..e6e9c1f19c09 100644 >>>> --- a/drivers/media/i2c/Kconfig >>>> +++ b/drivers/media/i2c/Kconfig >>>> @@ -1454,6 +1454,17 @@ config VIDEO_S5C73M3 >>>> This is a V4L2 sensor driver for Samsung S5C73M3 >>>> 8 Mpixel camera. >>>> >>>> +config VIDEO_ST_VGXY61 >>>> + tristate "ST VGXY61 sensor support" >>>> + depends on OF >>>> + depends on GPIOLIB && VIDEO_V4L2 && I2C >>>> + select MEDIA_CONTROLLER >>>> + select VIDEO_V4L2_SUBDEV_API >>>> + select V4L2_FWNODE >>>> + help >>>> + This is a Video4Linux2 sensor driver for the ST VGXY61 >>>> + camera sensor. >>>> + >>>> endmenu >>>> >>>> menu "Lens drivers" >>>> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile >>>> index f6b80ef6f41d..0190b5edfa24 100644 >>>> --- a/drivers/media/i2c/Makefile >>>> +++ b/drivers/media/i2c/Makefile >>>> @@ -138,4 +138,5 @@ obj-$(CONFIG_VIDEO_MAX9271_LIB) += max9271.o >>>> obj-$(CONFIG_VIDEO_RDACM20) += rdacm20.o >>>> obj-$(CONFIG_VIDEO_RDACM21) += rdacm21.o >>>> obj-$(CONFIG_VIDEO_ST_MIPID02) += st-mipid02.o >>>> +obj-$(CONFIG_VIDEO_ST_VGXY61) += st-vgxy61.o >>>> obj-$(CONFIG_SDR_MAX2175) += max2175.o >>>> diff --git a/drivers/media/i2c/st-vgxy61.c b/drivers/media/i2c/st-vgxy61.c >>>> new file mode 100644 >>>> index 000000000000..d3d816189f86 >>>> --- /dev/null >>>> +++ b/drivers/media/i2c/st-vgxy61.c >>>> @@ -0,0 +1,1919 @@ >>>> +// SPDX-License-Identifier: GPL-2.0 >>>> +/* >>>> + * Driver for VGXY61 global shutter sensor family driver >>>> + * >>>> + * Copyright (C) 2022 STMicroelectronics SA >>>> + */ >>>> + >>>> +#include <linux/clk.h> >>>> +#include <linux/delay.h> >>>> +#include <linux/gpio/consumer.h> >>>> +#include <linux/i2c.h> >>>> +#include <linux/module.h> >>>> +#include <linux/regulator/consumer.h> >>>> +#include <linux/units.h> >>>> +#include <linux/iopoll.h> >>>> +#include <media/mipi-csi2.h> >>>> +#include <media/v4l2-async.h> >>>> +#include <media/v4l2-ctrls.h> >>>> +#include <media/v4l2-device.h> >>>> +#include <media/v4l2-fwnode.h> >>>> +#include <media/v4l2-subdev.h> >>>> + >>>> +#define US_PER_MS 1000 >>>> + >>>> +#define DEVICE_MODEL_ID_REG 0x0000 >>>> +#define VG5661_MODEL_ID 0x5661 >>>> +#define VG5761_MODEL_ID 0x5761 >>>> +#define VGX661_WIDTH 1464 >>>> +#define VGX661_HEIGHT 1104 >>>> +#define VGX761_WIDTH 1944 >>>> +#define VGX761_HEIGHT 1204 >>>> +#define VGX661_DEFAULT_MODE 1 >>>> +#define VGX761_DEFAULT_MODE 1 >>>> +#define VGX661_SHORT_ROT_TERM 93 >>>> +#define VGX761_SHORT_ROT_TERM 90 >>>> +#define VGXY61_EXPOS_ROT_TERM 66 >>>> +#define DEVICE_REVISION 0x0002 >>>> +#define DEVICE_FWPATCH_REVISION 0x0014 >>>> +#define DEVICE_FWPATCH_START_ADDR 0x2000 >>>> +#define DEVICE_SYSTEM_FSM 0x0020 >>>> +#define SW_STBY 0x03 >>>> +#define STREAMING 0x04 >>>> +#define DEVICE_NVM 0x0023 >>>> +#define NVM_OK 0x04 >>>> +#define DEVICE_THSENS1_TEMPERATURE 0x0044 >>>> +#define DEVICE_STBY 0x0201 >>>> +#define STBY_NO_REQ 0 >>>> +#define STBY_REQ_TMP_READ BIT(2) >>>> +#define DEVICE_STREAMING 0x0202 >>>> +#define REQ_NO_REQUEST 0 >>>> +#define REQ_STOP_STREAMING BIT(0) >>>> +#define REQ_START_STREAMING BIT(1) >>>> +#define DEVICE_EXT_CLOCK 0x0220 >>>> +#define DEVICE_CLK_PLL_PREDIV 0x0224 >>>> +#define DEVICE_CLK_SYS_PLL_MULT 0x0225 >>>> +#define DEVICE_GPIO_0_CTRL 0x0236 >>>> +#define DEVICE_GPIO_1_CTRL 0x0237 >>>> +#define DEVICE_GPIO_2_CTRL 0x0238 >>>> +#define DEVICE_GPIO_3_CTRL 0x0239 >>>> +#define DEVICE_SIGNALS_POLARITY_CTRL 0x023b >>>> +#define DEVICE_LINE_LENGTH 0x0300 >>>> +#define DEVICE_ORIENTATION 0x0302 >>>> +#define DEVICE_VT_CTRL 0x0304 >>>> +#define DEVICE_FORMAT_CTRL 0x0305 >>>> +#define DEVICE_OIF_CTRL 0x0306 >>>> +#define DEVICE_OIF_ROI0_CTRL 0x030a >>>> +#define DEVICE_ROI0_START_H 0x0400 >>>> +#define DEVICE_ROI0_START_V 0x0402 >>>> +#define DEVICE_ROI0_END_H 0x0404 >>>> +#define DEVICE_ROI0_END_V 0x0406 >>>> +#define DEVICE_PATGEN_CTRL 0x0440 >>>> +#define DEVICE_FRAME_CONTENT_CTRL 0x0478 >>>> +#define DEVICE_COARSE_EXPOSURE_LONG 0x0500 >>>> +#define DEVICE_COARSE_EXPOSURE_SHORT 0x0504 >>>> +#define DEVICE_ANALOG_GAIN 0x0508 >>>> +#define DEVICE_DIGITAL_GAIN_LONG 0x050a >>>> +#define DEVICE_DIGITAL_GAIN_SHORT 0x0512 >>>> +#define DEVICE_FRAME_LENGTH 0x051a >>>> +#define DEVICE_SIGNALS_CTRL 0x0522 >>>> +#define DEVICE_STROBE_LONG_START_DELAY 0x0528 >>>> +#define DEVICE_STROBE_LONG_END_DELAY 0x052a >>>> +#define DEVICE_STROBE_SHORT_START_DELAY 0x052c >>>> +#define DEVICE_STROBE_SHORT_END_DELAY 0x052e >>>> +#define DEVICE_READOUT_CTRL 0x0530 >>>> +#define DEVICE_HDR_CTRL 0x0532 >>>> +#define DEVICE_PATGEN_LONG_DATA_GR 0x092c >>>> +#define DEVICE_PATGEN_LONG_DATA_R 0x092e >>>> +#define DEVICE_PATGEN_LONG_DATA_B 0x0930 >>>> +#define DEVICE_PATGEN_LONG_DATA_GB 0x0932 >>>> +#define DEVICE_PATGEN_SHORT_DATA_GR 0x0950 >>>> +#define DEVICE_PATGEN_SHORT_DATA_R 0x0952 >>>> +#define DEVICE_PATGEN_SHORT_DATA_B 0x0954 >>>> +#define DEVICE_PATGEN_SHORT_DATA_GB 0x0956 >>>> +#define DEVICE_BYPASS_CTRL 0x0a60 >>>> + >>>> +#define V4L2_CID_HDR (V4L2_CID_USER_BASE | 0x1004) >>>> +#define V4L2_CID_GPIOS_STROBE_LONG_START_DELAY (V4L2_CID_USER_BASE | 0x1019) >>>> +#define V4L2_CID_GPIOS_STROBE_LONG_END_DELAY (V4L2_CID_USER_BASE | 0x101a) >>>> +#define V4L2_CID_GPIOS_STROBE_SHORT_START_DELAY (V4L2_CID_USER_BASE | 0x101b) >>>> +#define V4L2_CID_GPIOS_STROBE_SHORT_END_DELAY (V4L2_CID_USER_BASE | 0x101c) >>>> +#define V4L2_CID_TEMPERATURE (V4L2_CID_USER_BASE | 0x1020) >>>> + >>>> +#define DEVICE_FWPATCH_REVISION_MAJOR 2 >>>> +#define DEVICE_FWPATCH_REVISION_MINOR 0 >>>> +#define DEVICE_FWPATCH_REVISION_MICRO 5 >>>> + >>>> +#define WRITE_MULTIPLE_CHUNK_MAX 16 >>>> +#define NB_GPIOS 4 >>>> +#define NB_POLARITIES 5 >>>> + >>>> +static const u8 patch_array[] = { >>>> + 0xbf, 0x00, 0x05, 0x20, 0x06, 0x01, 0xe0, 0xe0, 0x04, 0x80, 0xe6, 0x45, >>>> + 0xed, 0x6f, 0xfe, 0xff, 0x14, 0x80, 0x1f, 0x84, 0x10, 0x42, 0x05, 0x7c, >>>> + 0x01, 0xc4, 0x1e, 0x80, 0xb6, 0x42, 0x00, 0xe0, 0x1e, 0x82, 0x1e, 0xc0, >>>> + 0x93, 0xdd, 0xc3, 0xc1, 0x0c, 0x04, 0x00, 0xfa, 0x86, 0x0d, 0x70, 0xe1, >>>> + 0x04, 0x98, 0x15, 0x00, 0x28, 0xe0, 0x14, 0x02, 0x08, 0xfc, 0x15, 0x40, >>>> + 0x28, 0xe0, 0x98, 0x58, 0xe0, 0xef, 0x04, 0x98, 0x0e, 0x04, 0x00, 0xf0, >>>> + 0x15, 0x00, 0x28, 0xe0, 0x19, 0xc8, 0x15, 0x40, 0x28, 0xe0, 0xc6, 0x41, >>>> + 0xfc, 0xe0, 0x14, 0x80, 0x1f, 0x84, 0x14, 0x02, 0xa0, 0xfc, 0x1e, 0x80, >>>> + 0x14, 0x80, 0x14, 0x02, 0x80, 0xfb, 0x14, 0x02, 0xe0, 0xfc, 0x1e, 0x80, >>>> + 0x14, 0xc0, 0x1f, 0x84, 0x14, 0x02, 0xa4, 0xfc, 0x1e, 0xc0, 0x14, 0xc0, >>>> + 0x14, 0x02, 0x80, 0xfb, 0x14, 0x02, 0xe4, 0xfc, 0x1e, 0xc0, 0x0c, 0x0c, >>>> + 0x00, 0xf2, 0x93, 0xdd, 0x86, 0x00, 0xf8, 0xe0, 0x04, 0x80, 0xc6, 0x03, >>>> + 0x70, 0xe1, 0x0e, 0x84, 0x93, 0xdd, 0xc3, 0xc1, 0x0c, 0x04, 0x00, 0xfa, >>>> + 0x6b, 0x80, 0x06, 0x40, 0x6c, 0xe1, 0x04, 0x80, 0x09, 0x00, 0xe0, 0xe0, >>>> + 0x0b, 0xa1, 0x95, 0x84, 0x05, 0x0c, 0x1c, 0xe0, 0x86, 0x02, 0xf9, 0x60, >>>> + 0xe0, 0xcf, 0x78, 0x6e, 0x80, 0xef, 0x25, 0x0c, 0x18, 0xe0, 0x05, 0x4c, >>>> + 0x1c, 0xe0, 0x86, 0x02, 0xf9, 0x60, 0xe0, 0xcf, 0x0b, 0x84, 0xd8, 0x6d, >>>> + 0x80, 0xef, 0x05, 0x4c, 0x18, 0xe0, 0x04, 0xd8, 0x0b, 0xa5, 0x95, 0x84, >>>> + 0x05, 0x0c, 0x2c, 0xe0, 0x06, 0x02, 0x01, 0x60, 0xe0, 0xce, 0x18, 0x6d, >>>> + 0x80, 0xef, 0x25, 0x0c, 0x30, 0xe0, 0x05, 0x4c, 0x2c, 0xe0, 0x06, 0x02, >>>> + 0x01, 0x60, 0xe0, 0xce, 0x0b, 0x84, 0x78, 0x6c, 0x80, 0xef, 0x05, 0x4c, >>>> + 0x30, 0xe0, 0x0c, 0x0c, 0x00, 0xf2, 0x93, 0xdd, 0x46, 0x01, 0x70, 0xe1, >>>> + 0x08, 0x80, 0x0b, 0xa1, 0x08, 0x5c, 0x00, 0xda, 0x06, 0x01, 0x68, 0xe1, >>>> + 0x04, 0x80, 0x4a, 0x40, 0x84, 0xe0, 0x08, 0x5c, 0x00, 0x9a, 0x06, 0x01, >>>> + 0xe0, 0xe0, 0x04, 0x80, 0x15, 0x00, 0x60, 0xe0, 0x19, 0xc4, 0x15, 0x40, >>>> + 0x60, 0xe0, 0x15, 0x00, 0x78, 0xe0, 0x19, 0xc4, 0x15, 0x40, 0x78, 0xe0, >>>> + 0x93, 0xdd, 0xc3, 0xc1, 0x46, 0x01, 0x70, 0xe1, 0x08, 0x80, 0x0b, 0xa1, >>>> + 0x08, 0x5c, 0x00, 0xda, 0x06, 0x01, 0x68, 0xe1, 0x04, 0x80, 0x4a, 0x40, >>>> + 0x84, 0xe0, 0x08, 0x5c, 0x00, 0x9a, 0x06, 0x01, 0xe0, 0xe0, 0x14, 0x80, >>>> + 0x25, 0x02, 0x54, 0xe0, 0x29, 0xc4, 0x25, 0x42, 0x54, 0xe0, 0x24, 0x80, >>>> + 0x35, 0x04, 0x6c, 0xe0, 0x39, 0xc4, 0x35, 0x44, 0x6c, 0xe0, 0x25, 0x02, >>>> + 0x64, 0xe0, 0x29, 0xc4, 0x25, 0x42, 0x64, 0xe0, 0x04, 0x80, 0x15, 0x00, >>>> + 0x7c, 0xe0, 0x19, 0xc4, 0x15, 0x40, 0x7c, 0xe0, 0x93, 0xdd, 0xc3, 0xc1, >>>> + 0x4c, 0x04, 0x7c, 0xfa, 0x86, 0x40, 0x98, 0xe0, 0x14, 0x80, 0x1b, 0xa1, >>>> + 0x06, 0x00, 0x00, 0xc0, 0x08, 0x42, 0x38, 0xdc, 0x08, 0x64, 0xa0, 0xef, >>>> + 0x86, 0x42, 0x3c, 0xe0, 0x68, 0x49, 0x80, 0xef, 0x6b, 0x80, 0x78, 0x53, >>>> + 0xc8, 0xef, 0xc6, 0x54, 0x6c, 0xe1, 0x7b, 0x80, 0xb5, 0x14, 0x0c, 0xf8, >>>> + 0x05, 0x14, 0x14, 0xf8, 0x1a, 0xac, 0x8a, 0x80, 0x0b, 0x90, 0x38, 0x55, >>>> + 0x80, 0xef, 0x1a, 0xae, 0x17, 0xc2, 0x03, 0x82, 0x88, 0x65, 0x80, 0xef, >>>> + 0x1b, 0x80, 0x0b, 0x8e, 0x68, 0x65, 0x80, 0xef, 0x9b, 0x80, 0x0b, 0x8c, >>>> + 0x08, 0x65, 0x80, 0xef, 0x6b, 0x80, 0x0b, 0x92, 0x1b, 0x8c, 0x98, 0x64, >>>> + 0x80, 0xef, 0x1a, 0xec, 0x9b, 0x80, 0x0b, 0x90, 0x95, 0x54, 0x10, 0xe0, >>>> + 0xa8, 0x53, 0x80, 0xef, 0x1a, 0xee, 0x17, 0xc2, 0x03, 0x82, 0xf8, 0x63, >>>> + 0x80, 0xef, 0x1b, 0x80, 0x0b, 0x8e, 0xd8, 0x63, 0x80, 0xef, 0x1b, 0x8c, >>>> + 0x68, 0x63, 0x80, 0xef, 0x6b, 0x80, 0x0b, 0x92, 0x65, 0x54, 0x14, 0xe0, >>>> + 0x08, 0x65, 0x84, 0xef, 0x68, 0x63, 0x80, 0xef, 0x7b, 0x80, 0x0b, 0x8c, >>>> + 0xa8, 0x64, 0x84, 0xef, 0x08, 0x63, 0x80, 0xef, 0x14, 0xe8, 0x46, 0x44, >>>> + 0x94, 0xe1, 0x24, 0x88, 0x4a, 0x4e, 0x04, 0xe0, 0x14, 0xea, 0x1a, 0x04, >>>> + 0x08, 0xe0, 0x0a, 0x40, 0x84, 0xed, 0x0c, 0x04, 0x00, 0xe2, 0x4a, 0x40, >>>> + 0x04, 0xe0, 0x19, 0x16, 0xc0, 0xe0, 0x0a, 0x40, 0x84, 0xed, 0x21, 0x54, >>>> + 0x60, 0xe0, 0x0c, 0x04, 0x00, 0xe2, 0x1b, 0xa5, 0x0e, 0xea, 0x01, 0x89, >>>> + 0x21, 0x54, 0x64, 0xe0, 0x7e, 0xe8, 0x65, 0x82, 0x1b, 0xa7, 0x26, 0x00, >>>> + 0x00, 0x80, 0xa5, 0x82, 0x1b, 0xa9, 0x65, 0x82, 0x1b, 0xa3, 0x01, 0x85, >>>> + 0x16, 0x00, 0x00, 0xc0, 0x01, 0x54, 0x04, 0xf8, 0x06, 0xaa, 0x01, 0x83, >>>> + 0x06, 0xa8, 0x65, 0x81, 0x06, 0xa8, 0x01, 0x54, 0x04, 0xf8, 0x01, 0x83, >>>> + 0x06, 0xaa, 0x09, 0x14, 0x18, 0xf8, 0x0b, 0xa1, 0x05, 0x84, 0xc6, 0x42, >>>> + 0xd4, 0xe0, 0x14, 0x84, 0x01, 0x83, 0x01, 0x54, 0x60, 0xe0, 0x01, 0x54, >>>> + 0x64, 0xe0, 0x0b, 0x02, 0x90, 0xe0, 0x10, 0x02, 0x90, 0xe5, 0x01, 0x54, >>>> + 0x88, 0xe0, 0xb5, 0x81, 0xc6, 0x40, 0xd4, 0xe0, 0x14, 0x80, 0x0b, 0x02, >>>> + 0xe0, 0xe4, 0x10, 0x02, 0x31, 0x66, 0x02, 0xc0, 0x01, 0x54, 0x88, 0xe0, >>>> + 0x1a, 0x84, 0x29, 0x14, 0x10, 0xe0, 0x1c, 0xaa, 0x2b, 0xa1, 0xf5, 0x82, >>>> + 0x25, 0x14, 0x10, 0xf8, 0x2b, 0x04, 0xa8, 0xe0, 0x20, 0x44, 0x0d, 0x70, >>>> + 0x03, 0xc0, 0x2b, 0xa1, 0x04, 0x00, 0x80, 0x9a, 0x02, 0x40, 0x84, 0x90, >>>> + 0x03, 0x54, 0x04, 0x80, 0x4c, 0x0c, 0x7c, 0xf2, 0x93, 0xdd, 0x00, 0x00, >>>> + 0x02, 0xa9, 0x00, 0x00, 0x64, 0x4a, 0x40, 0x00, 0x08, 0x2d, 0x58, 0xe0, >>>> + 0xa8, 0x98, 0x40, 0x00, 0x28, 0x07, 0x34, 0xe0, 0x05, 0xb9, 0x00, 0x00, >>>> + 0x28, 0x00, 0x41, 0x05, 0x88, 0x00, 0x41, 0x3c, 0x98, 0x00, 0x41, 0x52, >>>> + 0x04, 0x01, 0x41, 0x79, 0x3c, 0x01, 0x41, 0x6a, 0x3d, 0xfe, 0x00, 0x00, >>>> +}; >>>> + >>>> +static const char * const vgxy61_test_pattern_menu[] = { >>>> + "Disabled", >>>> + "Solid", >>>> + "Colorbar", >>>> + "Gradbar", >>>> + "Hgrey", >>>> + "Vgrey", >>>> + "Dgrey", >>>> + "PN28", >>>> +}; >>>> + >>>> +static const char * const vgxy61_hdr_modes[] = { >>>> + "HDR linearize", >>>> + "HDR substraction", >>>> + "no HDR", >>>> +}; >>>> + >>>> +/* Regulator supplies */ >>>> +static const char * const vgxy61_supply_name[] = { >>>> + "VCORE", >>>> + "VDDIO", >>>> + "VANA", >>>> +}; >>>> + >>>> +static const s64 link_freq[] = { >>>> + /* >>>> + * MIPI output freq is 804Mhz / 2, as it uses both rising edge and falling edges to send >>>> + * data >>>> + */ >>>> + 402000000ULL >>>> +}; >>>> + >>>> +#define VGXY61_NUM_SUPPLIES ARRAY_SIZE(vgxy61_supply_name) >>>> + >>>> +/* Macro to convert index to 8.8 fixed point gain */ >>>> +#define I2FP(i) ((u32)(8192.0 / (32 - (i)))) >>>> +/* Array of possibles analog gains in 8.8 fixed point */ >>>> +static const u16 analog_gains[] = { >>>> + I2FP(0), I2FP(1), I2FP(2), I2FP(3), I2FP(4), I2FP(5), I2FP(6), I2FP(7), I2FP(8), I2FP(9), >>>> + I2FP(10), I2FP(11), I2FP(12), I2FP(13), I2FP(14), I2FP(15), I2FP(16), >>>> +}; >>>> + >>>> +enum bin_mode { >>>> + BIN_MODE_NORMAL, >>>> + BIN_MODE_DIGITAL_X2, >>>> + BIN_MODE_DIGITAL_X4, >>>> + BIN_MODE_ANALOG_SUB_X2, >>>> + BIN_MODE_ANALOG_SUB_X4, >>>> +}; >>>> + >>>> +enum hdr { >>>> + HDR_LINEAR, >>>> + HDR_SUB, >>>> + NO_HDR, >>>> +}; >>>> + >>>> +enum strobe_modes { >>>> + STROBE_DISABLED, >>>> + STROBE_LONG, >>>> + STROBE_ENABLED, >>>> +}; >>>> + >>>> +struct vgxy61_mode_info { >>>> + u32 width; >>>> + u32 height; >>>> + enum bin_mode bin_mode; >>>> +}; >>>> + >>>> +static const u32 vgxy61_supported_codes[] = { >>>> + MEDIA_BUS_FMT_SGBRG8_1X8, >>>> + MEDIA_BUS_FMT_SGBRG10_1X10, >>>> + MEDIA_BUS_FMT_SGBRG12_1X12, >>>> + MEDIA_BUS_FMT_SGBRG14_1X14, >>>> + MEDIA_BUS_FMT_SGBRG16_1X16 >>>> +}; >>>> + >>>> +const int vgx761_sensor_frame_rates[] = {75, 60, 30, 15, 10, 5, 2}; >>>> +const int vgx661_sensor_frame_rates[] = {60, 30, 15, 10, 5, 2}; >>>> + >>>> +static const struct vgxy61_mode_info vgx661_mode_data[] = { >>>> + {1464, 1104, BIN_MODE_NORMAL}, >>>> + {1280, 720, BIN_MODE_NORMAL}, >>>> + { 640, 480, BIN_MODE_DIGITAL_X2}, >>>> + { 320, 240, BIN_MODE_DIGITAL_X4}, >>>> +}; >>>> + >>>> +static const struct vgxy61_mode_info vgx761_mode_data[] = { >>>> + {1944, 1204, BIN_MODE_NORMAL}, >>>> + {1920, 1080, BIN_MODE_NORMAL}, >>>> + {1280, 720, BIN_MODE_NORMAL}, >>>> + { 640, 480, BIN_MODE_DIGITAL_X2}, >>>> + { 320, 240, BIN_MODE_DIGITAL_X4}, >>>> +}; >>>> + >>>> +struct gpios_ctrls { >>>> + struct v4l2_ctrl *long_start; >>>> + struct v4l2_ctrl *long_end; >>>> + struct v4l2_ctrl *short_start; >>>> + struct v4l2_ctrl *short_end; >>>> +}; >>>> + >>>> +struct vgxy61_ctrls { >>>> + struct v4l2_ctrl_handler handler; >>>> + struct v4l2_ctrl *exposure; >>>> + struct v4l2_ctrl *analog_gain; >>>> + struct v4l2_ctrl *digital_gain; >>>> + struct gpios_ctrls gpios; >>>> + struct v4l2_ctrl *vflip; >>>> + struct v4l2_ctrl *hflip; >>>> + struct v4l2_ctrl *patgen; >>>> + struct v4l2_ctrl *hdr; >>>> + struct v4l2_ctrl *pixel_rate; >>>> + struct v4l2_ctrl *link_freq; >>>> + struct v4l2_ctrl *temp; >>>> +}; >>>> + >>>> +struct vgxy61_dev { >>>> + struct i2c_client *i2c_client; >>>> + struct v4l2_subdev sd; >>>> + struct media_pad pad; >>>> + struct regulator_bulk_data supplies[VGXY61_NUM_SUPPLIES]; >>>> + struct gpio_desc *reset_gpio; >>>> + struct clk *xclk; >>>> + u32 clk_freq; >>>> + int sensor_width; >>>> + int sensor_height; >>>> + u16 oif_ctrl; >>>> + int nb_of_lane; >>>> + int data_rate_in_mbps; >>>> + int pclk; >>>> + u16 line_length; >>>> + int rot_term; >>>> + bool gpios_polarity; >>>> + bool slave_mode; >>>> + /* Lock to protect all members below */ >>>> + struct mutex lock; >>>> + struct vgxy61_ctrls ctrls; >>>> + bool streaming; >>>> + struct v4l2_mbus_framefmt fmt; >>>> + const struct vgxy61_mode_info *sensor_modes; >>>> + int sensor_modes_nb; >>>> + const struct vgxy61_mode_info *current_mode; >>>> + const int *sensor_rates; >>>> + int sensor_rates_nb; >>>> + struct v4l2_fract frame_interval; >>>> + bool hflip; >>>> + bool vflip; >>>> + enum hdr hdr; >>>> + int expo_long; >>>> + int expo_short; >>>> +}; >>>> + >>>> +static u8 get_bpp_by_code(__u32 code) >>>> +{ >>>> + switch (code) { >>>> + case MEDIA_BUS_FMT_SGBRG8_1X8: >>>> + return 8; >>>> + case MEDIA_BUS_FMT_SGBRG10_1X10: >>>> + return 10; >>>> + case MEDIA_BUS_FMT_SGBRG12_1X12: >>>> + return 12; >>>> + case MEDIA_BUS_FMT_SGBRG14_1X14: >>>> + return 14; >>>> + case MEDIA_BUS_FMT_SGBRG16_1X16: >>>> + return 16; >>>> + default: >>>> + /* Should never happen */ >>>> + WARN(1, "Unsupported code %d. default to 8 bpp", code); >>>> + return 8; >>>> + } >>>> +} >>>> + >>>> +static u8 get_data_type_by_code(__u32 code) >>>> +{ >>>> + switch (code) { >>>> + case MEDIA_BUS_FMT_SGBRG8_1X8: >>>> + return MIPI_CSI2_DT_RAW8; >>>> + case MEDIA_BUS_FMT_SGBRG10_1X10: >>>> + return MIPI_CSI2_DT_RAW10; >>>> + case MEDIA_BUS_FMT_SGBRG12_1X12: >>>> + return MIPI_CSI2_DT_RAW12; >>>> + case MEDIA_BUS_FMT_SGBRG14_1X14: >>>> + return MIPI_CSI2_DT_RAW14; >>>> + case MEDIA_BUS_FMT_SGBRG16_1X16: >>>> + return MIPI_CSI2_DT_RAW16; >>>> + default: >>>> + /* Should never happen */ >>>> + WARN(1, "Unsupported code %d. default to MIPI_CSI2_DT_RAW8 data type", code); >>>> + return MIPI_CSI2_DT_RAW8; >>>> + } >>>> +} >>>> + >>>> +static void compute_pll_parameters_by_freq(u32 freq, unsigned int *prediv, unsigned int *mult) >>>> +{ >>>> + const unsigned int predivs[] = {1, 2, 4}; >>>> + int i; >>>> + >>>> + /* >>>> + * Freq range is [6Mhz-27Mhz] already checked. >>>> + * Output of divider should be in [6Mhz-12Mhz[. >>>> + */ >>>> + for (i = 0; i < ARRAY_SIZE(predivs); i++) { >>>> + *prediv = predivs[i]; >>>> + if (freq / *prediv < 12 * HZ_PER_MHZ) >>>> + break; >>>> + } >>>> + WARN_ON(i == ARRAY_SIZE(predivs)); >>>> + >>>> + /* >>>> + * Target freq is 804Mhz. Don't change this as it will impact image quality. >>>> + */ >>>> + *mult = ((804 * HZ_PER_MHZ) * (*prediv) + freq / 2) / freq; >>>> +} >>>> + >>>> +static s32 get_pixel_rate(struct vgxy61_dev *sensor) >>>> +{ >>>> + return div64_u64((u64)sensor->data_rate_in_mbps * sensor->nb_of_lane, >>>> + get_bpp_by_code(sensor->fmt.code)); >>>> +} >>>> + >>>> +static inline struct vgxy61_dev *to_vgxy61_dev(struct v4l2_subdev *sd) >>>> +{ >>>> + return container_of(sd, struct vgxy61_dev, sd); >>>> +} >>>> + >>>> +static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl) >>>> +{ >>>> + return &container_of(ctrl->handler, struct vgxy61_dev, ctrls.handler)->sd; >>>> +} >>>> + >>>> +static int get_chunk_size(struct vgxy61_dev *sensor) >>>> +{ >>>> + struct i2c_adapter *adapter = sensor->i2c_client->adapter; >>>> + int max_write_len = WRITE_MULTIPLE_CHUNK_MAX; >>>> + >>>> + if (adapter->quirks && adapter->quirks->max_write_len) >>>> + max_write_len = adapter->quirks->max_write_len - 2; >>>> + >>>> + max_write_len = min(max_write_len, WRITE_MULTIPLE_CHUNK_MAX); >>>> + >>>> + return max(max_write_len, 1); >>>> +} >>>> + >>>> +static int vgxy61_read_multiple(struct vgxy61_dev *sensor, u16 reg, u8 *val, int len) >>>> +{ >>>> + struct i2c_client *client = sensor->i2c_client; >>>> + struct i2c_msg msg[2]; >>>> + u8 buf[2]; >>>> + int ret; >>>> + >>>> + buf[0] = reg >> 8; >>>> + buf[1] = reg & 0xff; >>>> + >>>> + msg[0].addr = client->addr; >>>> + msg[0].flags = client->flags; >>>> + msg[0].buf = buf; >>>> + msg[0].len = sizeof(buf); >>>> + >>>> + msg[1].addr = client->addr; >>>> + msg[1].flags = client->flags | I2C_M_RD; >>>> + msg[1].buf = val; >>>> + msg[1].len = len; >>>> + >>>> + ret = i2c_transfer(client->adapter, msg, 2); >>>> + if (ret < 0) { >>>> + dev_dbg(&client->dev, "%s: %x i2c_transfer, reg: %x => %d\n", __func__, >>>> + client->addr, reg, ret); >>>> + return ret; >>>> + } >>>> + >>>> + return 0; >>>> +} >>>> + >>>> +static inline int vgxy61_read_reg(struct vgxy61_dev *sensor, u16 reg, u8 *val) >>>> +{ >>>> + return vgxy61_read_multiple(sensor, reg, val, sizeof(*val)); >>>> +} >>>> + >>>> +static inline int vgxy61_read_reg16(struct vgxy61_dev *sensor, u16 reg, u16 *val) >>>> +{ >>>> + return vgxy61_read_multiple(sensor, reg, (u8 *)val, sizeof(*val)); >>>> +} >>>> + >>>> +static int vgxy61_write_multiple(struct vgxy61_dev *sensor, u16 reg, const u8 *data, int len) >>>> +{ >>>> + struct i2c_client *client = sensor->i2c_client; >>>> + struct i2c_msg msg; >>>> + u8 buf[WRITE_MULTIPLE_CHUNK_MAX + 2]; >>>> + int i; >>>> + int ret; >>>> + >>>> + if (len > WRITE_MULTIPLE_CHUNK_MAX) >>>> + return -EINVAL; >>>> + buf[0] = reg >> 8; >>>> + buf[1] = reg & 0xff; >>>> + for (i = 0; i < len; i++) >>>> + buf[i + 2] = data[i]; >>>> + >>>> + msg.addr = client->addr; >>>> + msg.flags = client->flags; >>>> + msg.buf = buf; >>>> + msg.len = len + 2; >>>> + >>>> + ret = i2c_transfer(client->adapter, &msg, 1); >>>> + if (ret < 0) { >>>> + dev_dbg(&client->dev, "%s: i2c_transfer, reg: %x => %d\n", __func__, reg, ret); >>>> + return ret; >>>> + } >>>> + >>>> + return 0; >>>> +} >>>> + >>>> +static int vgxy61_write_array(struct vgxy61_dev *sensor, u16 reg, int nb, const u8 *array) >>>> +{ >>>> + const int chunk_size = get_chunk_size(sensor); >>>> + int ret; >>>> + int sz; >>>> + >>>> + while (nb) { >>>> + sz = min(nb, chunk_size); >>>> + ret = vgxy61_write_multiple(sensor, reg, array, sz); >>>> + if (ret < 0) >>>> + return ret; >>>> + nb -= sz; >>>> + reg += sz; >>>> + array += sz; >>>> + } >>>> + >>>> + return 0; >>>> +} >>>> + >>>> +static inline int vgxy61_write_reg(struct vgxy61_dev *sensor, u16 reg, u8 val) >>>> +{ >>>> + return vgxy61_write_multiple(sensor, reg, &val, sizeof(val)); >>>> +} >>>> + >>>> +static inline int vgxy61_write_reg16(struct vgxy61_dev *sensor, u16 reg, u16 val) >>>> +{ >>>> + return vgxy61_write_multiple(sensor, reg, (u8 *)&val, sizeof(val)); >>>> +} >>>> + >>>> +static inline int vgxy61_write_reg32(struct vgxy61_dev *sensor, u16 reg, u32 val) >>>> +{ >>>> + return vgxy61_write_multiple(sensor, reg, (u8 *)&val, sizeof(val)); >>>> +} >>>> + >>>> +static int vgxy61_poll_reg(struct vgxy61_dev *sensor, u16 reg, u8 poll_val) >>>> +{ >>>> + const int loop_delay_ms = 10; >>>> + const int timeout_ms = 500; >>>> + u8 val; >>>> + int ret, timeout; >>>> + >>>> + timeout = read_poll_timeout(vgxy61_read_reg, ret, ((ret != 0) || (val == poll_val)), >>>> + loop_delay_ms * US_PER_MS, timeout_ms * US_PER_MS, false, >>>> + sensor, reg, &val); >>>> + if (timeout) >>>> + return timeout; >>>> + >>>> + return ret; >>>> +} >>>> + >>>> +static int vgxy61_wait_state(struct vgxy61_dev *sensor, int state) >>>> +{ >>>> + return vgxy61_poll_reg(sensor, DEVICE_SYSTEM_FSM, state); >>>> +} >>>> + >>>> +static int vgxy61_check_bw(struct vgxy61_dev *sensor) >>>> +{ >>>> + struct i2c_client *client = sensor->i2c_client; >>>> + /* Correction factor for time required between 2 lines */ >>>> + const int mipi_margin = 1056; >>>> + int binning_scale = 1 << sensor->current_mode->bin_mode; >>>> + int bpp = get_bpp_by_code(sensor->fmt.code); >>>> + int max_bit_per_line; >>>> + int bit_per_line; >>>> + u64 line_rate; >>>> + >>>> + line_rate = sensor->nb_of_lane * (u64)sensor->data_rate_in_mbps * sensor->line_length; >>>> + max_bit_per_line = div64_u64(line_rate, sensor->pclk) - mipi_margin; >>>> + bit_per_line = (bpp * sensor->current_mode->width) / binning_scale; >>>> + >>>> + dev_dbg(&client->dev, "max_bit_per_line = %d\n", max_bit_per_line); >>>> + dev_dbg(&client->dev, "required bit_per_line = %d\n", bit_per_line); >>>> + >>>> + return bit_per_line > max_bit_per_line ? -EINVAL : 0; >>>> +} >>>> + >>>> +static int apply_exposure(struct vgxy61_dev *sensor) >>>> +{ >>>> + struct i2c_client *client = sensor->i2c_client; >>>> + int ret; >>>> + >>>> + /* We first set expo to zero to avoid forbidden parameters couple */ >>>> + ret = vgxy61_write_reg16(sensor, DEVICE_COARSE_EXPOSURE_SHORT, 0); >>>> + if (ret) >>>> + return ret; >>>> + ret = vgxy61_write_reg16(sensor, DEVICE_COARSE_EXPOSURE_LONG, sensor->expo_long); >>>> + if (ret) >>>> + return ret; >>>> + ret = vgxy61_write_reg16(sensor, DEVICE_COARSE_EXPOSURE_SHORT, sensor->expo_short); >>>> + if (ret) >>>> + return ret; >>>> + >>>> + dev_dbg(&client->dev, "%s applied expo %d (short: %d)\n", __func__, >>>> + sensor->expo_long, sensor->expo_short); >>>> + >>>> + return 0; >>>> +} >>>> + >>>> +static int set_frame_rate(struct vgxy61_dev *sensor) >>>> +{ >>>> + u16 frame_length; >>>> + >>>> + frame_length = sensor->pclk / (sensor->line_length * sensor->frame_interval.denominator); >>>> + >>>> + return vgxy61_write_reg16(sensor, DEVICE_FRAME_LENGTH, frame_length); >>>> +} >>>> + >>>> +static int vgxy61_get_regulators(struct vgxy61_dev *sensor) >>>> +{ >>>> + int i; >>>> + >>>> + for (i = 0; i < VGXY61_NUM_SUPPLIES; i++) >>>> + sensor->supplies[i].supply = vgxy61_supply_name[i]; >>>> + >>>> + return devm_regulator_bulk_get(&sensor->i2c_client->dev, VGXY61_NUM_SUPPLIES, >>>> + sensor->supplies); >>>> +} >>>> + >>>> +static int vgxy61_apply_reset(struct vgxy61_dev *sensor) >>>> +{ >>>> + struct i2c_client *client = sensor->i2c_client; >>>> + >>>> + dev_dbg(&client->dev, "%s applied reset\n", __func__); >>>> + gpiod_set_value_cansleep(sensor->reset_gpio, 0); >>>> + usleep_range(5000, 10000); >>>> + gpiod_set_value_cansleep(sensor->reset_gpio, 1); >>>> + usleep_range(5000, 10000); >>>> + gpiod_set_value_cansleep(sensor->reset_gpio, 0); >>>> + usleep_range(40000, 100000); >>>> + return vgxy61_wait_state(sensor, SW_STBY); >>>> +} >>>> + >>>> +static int vgxy61_try_fmt_internal(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt, >>>> + const struct vgxy61_mode_info **new_mode) >>>> +{ >>>> + struct vgxy61_dev *sensor = to_vgxy61_dev(sd); >>>> + const struct vgxy61_mode_info *mode = sensor->sensor_modes; >>>> + unsigned int index; >>>> + >>>> + /* Select code */ >>>> + for (index = 0; index < ARRAY_SIZE(vgxy61_supported_codes); index++) { >>>> + if (vgxy61_supported_codes[index] == fmt->code) >>>> + break; >>>> + } >>>> + if (index == ARRAY_SIZE(vgxy61_supported_codes)) >>>> + index = 0; >>>> + >>>> + /* Select size */ >>>> + do { >>>> + if (mode->width <= fmt->width && mode->height <= fmt->height) >>>> + break; >>>> + } while ((++mode)->width); >>>> + if (!mode->width) >>>> + mode--; >>>> + >>>> + *new_mode = mode; >>>> + fmt->code = vgxy61_supported_codes[index]; >>>> + fmt->width = mode->width; >>>> + fmt->height = mode->height; >>>> + fmt->colorspace = V4L2_COLORSPACE_SRGB; >>>> + fmt->field = V4L2_FIELD_NONE; >>>> + >>>> + return 0; >>>> +} >>>> + >>>> +static int vgxy61_stream_enable(struct vgxy61_dev *sensor) >>>> +{ >>>> + int center_x = sensor->sensor_width / 2; >>>> + int center_y = sensor->sensor_height / 2; >>>> + int scale = 1 << sensor->current_mode->bin_mode; >>>> + int width = sensor->current_mode->width * scale; >>>> + int height = sensor->current_mode->height * scale; >>>> + int ret; >>>> + >>>> + ret = vgxy61_check_bw(sensor); >>>> + if (ret) >>>> + return ret; >>>> + >>>> + /* Configure sensor */ >>>> + ret = vgxy61_write_reg(sensor, DEVICE_FORMAT_CTRL, get_bpp_by_code(sensor->fmt.code)); >>>> + if (ret) >>>> + return ret; >>>> + ret = vgxy61_write_reg(sensor, DEVICE_OIF_ROI0_CTRL, >>>> + get_data_type_by_code(sensor->fmt.code)); >>>> + if (ret) >>>> + return ret; >>>> + >>>> + ret = vgxy61_write_reg(sensor, DEVICE_READOUT_CTRL, sensor->current_mode->bin_mode); >>>> + if (ret) >>>> + return ret; >>>> + ret = vgxy61_write_reg16(sensor, DEVICE_ROI0_START_H, center_x - width / 2); >>>> + if (ret) >>>> + return ret; >>>> + ret = vgxy61_write_reg16(sensor, DEVICE_ROI0_END_H, center_x + width / 2 - 1); >>>> + if (ret) >>>> + return ret; >>>> + ret = vgxy61_write_reg16(sensor, DEVICE_ROI0_START_V, center_y - height / 2); >>>> + if (ret) >>>> + return ret; >>>> + ret = vgxy61_write_reg16(sensor, DEVICE_ROI0_END_V, center_y + height / 2 - 1); >>>> + if (ret) >>>> + return ret; >>>> + >>>> + ret = set_frame_rate(sensor); >>>> + if (ret) >>>> + return ret; >>>> + >>>> + ret = apply_exposure(sensor); >>>> + if (ret) >>>> + return ret; >>>> + >>>> + /* Start streaming */ >>>> + ret = vgxy61_write_reg(sensor, DEVICE_STREAMING, REQ_START_STREAMING); >>>> + if (ret) >>>> + return ret; >>>> + >>>> + ret = vgxy61_poll_reg(sensor, DEVICE_STREAMING, REQ_NO_REQUEST); >>>> + if (ret) >>>> + return ret; >>>> + >>>> + ret = vgxy61_wait_state(sensor, STREAMING); >>>> + if (ret) >>>> + return ret; >>>> + >>>> + return 0; >>>> +} >>>> + >>>> +static int vgxy61_stream_disable(struct vgxy61_dev *sensor) >>>> +{ >>>> + int ret; >>>> + >>>> + ret = vgxy61_write_reg(sensor, DEVICE_STREAMING, REQ_STOP_STREAMING); >>>> + if (ret) >>>> + return ret; >>>> + >>>> + ret = vgxy61_poll_reg(sensor, DEVICE_STREAMING, REQ_NO_REQUEST); >>>> + if (ret) >>>> + return ret; >>>> + >>>> + ret = vgxy61_wait_state(sensor, SW_STBY); >>>> + if (ret) >>>> + return ret; >>>> + >>>> + return 0; >>>> +} >>>> + >>>> +static int vgxy61_s_stream(struct v4l2_subdev *sd, int enable) >>>> +{ >>>> + struct vgxy61_dev *sensor = to_vgxy61_dev(sd); >>>> + struct i2c_client *client = sensor->i2c_client; >>>> + int ret = 0; >>>> + >>>> + mutex_lock(&sensor->lock); >>>> + dev_dbg(&client->dev, "%s : requested %d / current = %d\n", __func__, enable, >>>> + sensor->streaming); >>>> + if (sensor->streaming == enable) >>>> + goto out; >>>> + >>>> + ret = enable ? vgxy61_stream_enable(sensor) : vgxy61_stream_disable(sensor); >>>> + if (!ret) >>>> + sensor->streaming = enable; >>>> + >>>> +out: >>>> + dev_dbg(&client->dev, "%s current now = %d / %d\n", __func__, sensor->streaming, ret); >>>> + mutex_unlock(&sensor->lock); >>>> + >>>> + return ret; >>>> +} >>>> + >>>> +static int vgxy61_g_frame_interval(struct v4l2_subdev *sd, struct v4l2_subdev_frame_interval *fi) >>>> +{ >>>> + struct vgxy61_dev *sensor = to_vgxy61_dev(sd); >>>> + >>>> + mutex_lock(&sensor->lock); >>>> + fi->interval = sensor->frame_interval; >>>> + mutex_unlock(&sensor->lock); >>>> + >>>> + return 0; >>>> +} >>>> + >>>> +static int vgxy61_s_frame_interval(struct v4l2_subdev *sd, struct v4l2_subdev_frame_interval *fi) >>>> +{ >>>> + struct vgxy61_dev *sensor = to_vgxy61_dev(sd); >>>> + struct i2c_client *client = sensor->i2c_client; >>>> + u64 req_int, err, min_err = ~0ULL; >>>> + u64 test_int; >>>> + int i = 0; >>>> + int ret; >>>> + >>>> + if (fi->interval.denominator == 0) >>>> + return -EINVAL; >>>> + >>>> + mutex_lock(&sensor->lock); >>>> + >>>> + if (sensor->streaming) { >>>> + ret = -EBUSY; >>>> + goto out; >>>> + } >>>> + >>>> + dev_dbg(&client->dev, "%s request %d/%d\n", __func__, >>>> + fi->interval.numerator, fi->interval.denominator); >>>> + /* Find nearest period */ >>>> + req_int = div64_u64((u64)(fi->interval.numerator * 10000), fi->interval.denominator); >>>> + for (i = 0; i < sensor->sensor_rates_nb; i++) { >>>> + test_int = div64_u64((u64)10000, sensor->sensor_rates[i]); >>>> + err = abs(test_int - req_int); >>>> + if (err < min_err) { >>>> + fi->interval.numerator = 1; >>>> + fi->interval.denominator = sensor->sensor_rates[i]; >>>> + min_err = err; >>>> + } >>>> + } >>>> + sensor->frame_interval = fi->interval; >>>> + dev_dbg(&client->dev, "%s set %d/%d\n", __func__, >>>> + fi->interval.numerator, fi->interval.denominator); >>>> + >>>> + ret = 0; >>>> +out: >>>> + mutex_unlock(&sensor->lock); >>>> + >>>> + return ret; >>>> +} >>>> + >>>> +static int vgxy61_enum_mbus_code(struct v4l2_subdev *sd, >>>> + struct v4l2_subdev_state *sd_state, >>>> + struct v4l2_subdev_mbus_code_enum *code) >>>> +{ >>>> + struct vgxy61_dev *sensor = to_vgxy61_dev(sd); >>>> + struct i2c_client *client = sensor->i2c_client; >>>> + >>>> + dev_dbg(&client->dev, "%s probe index %d\n", __func__, code->index); >>>> + if (code->index >= ARRAY_SIZE(vgxy61_supported_codes)) >>>> + return -EINVAL; >>>> + >>>> + code->code = vgxy61_supported_codes[code->index]; >>>> + >>>> + return 0; >>>> +} >>>> + >>>> +static int vgxy61_get_fmt(struct v4l2_subdev *sd, >>>> + struct v4l2_subdev_state *sd_state, >>>> + struct v4l2_subdev_format *format) >>>> +{ >>>> + struct vgxy61_dev *sensor = to_vgxy61_dev(sd); >>>> + struct i2c_client *client = sensor->i2c_client; >>>> + struct v4l2_mbus_framefmt *fmt; >>>> + >>>> + dev_dbg(&client->dev, "%s probe %d\n", __func__, format->pad); >>>> + dev_dbg(&client->dev, "%s %dx%d\n", __func__, format->format.width, format->format.height); >>>> + >>>> + mutex_lock(&sensor->lock); >>>> + >>>> + if (format->which == V4L2_SUBDEV_FORMAT_TRY) >>>> + fmt = v4l2_subdev_get_try_format(&sensor->sd, sd_state, format->pad); >>>> + else >>>> + fmt = &sensor->fmt; >>>> + >>>> + format->format = *fmt; >>>> + >>>> + mutex_unlock(&sensor->lock); >>>> + >>>> + return 0; >>>> +} >>>> + >>>> +static int vgxy61_set_fmt(struct v4l2_subdev *sd, >>>> + struct v4l2_subdev_state *sd_state, >>>> + struct v4l2_subdev_format *format) >>>> +{ >>>> + struct vgxy61_dev *sensor = to_vgxy61_dev(sd); >>>> + struct i2c_client *client = sensor->i2c_client; >>>> + const struct vgxy61_mode_info *new_mode; >>>> + struct v4l2_mbus_framefmt *fmt; >>>> + int ret; >>>> + >>>> + dev_dbg(&client->dev, "%s probe %d\n", __func__, format->pad); >>>> + dev_dbg(&client->dev, "%s %dx%d\n", __func__, format->format.width, format->format.height); >>>> + >>>> + mutex_lock(&sensor->lock); >>>> + >>>> + if (sensor->streaming) { >>>> + ret = -EBUSY; >>>> + goto out; >>>> + } >>>> + >>>> + /* Find best format */ >>>> + ret = vgxy61_try_fmt_internal(sd, &format->format, &new_mode); >>>> + if (ret) >>>> + goto out; >>>> + >>>> + if (format->which == V4L2_SUBDEV_FORMAT_TRY) >>>> + fmt = v4l2_subdev_get_try_format(sd, sd_state, 0); >>>> + else >>>> + fmt = &sensor->fmt; >>>> + *fmt = format->format; >>>> + sensor->current_mode = new_mode; >>>> + /* Update pixel rate control to reflect new mode */ >>>> + __v4l2_ctrl_s_ctrl_int64(sensor->ctrls.pixel_rate, get_pixel_rate(sensor)); >>>> + >>>> +out: >>>> + mutex_unlock(&sensor->lock); >>>> + >>>> + return ret; >>>> +} >>>> + >>>> +static int vgxy61_enum_frame_size(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, >>>> + struct v4l2_subdev_frame_size_enum *fse) >>>> +{ >>>> + struct vgxy61_dev *sensor = to_vgxy61_dev(sd); >>>> + struct i2c_client *client = sensor->i2c_client; >>>> + >>>> + dev_dbg(&client->dev, "%s for index %d\n", __func__, fse->index); >>>> + if (fse->index >= sensor->sensor_modes_nb) >>>> + return -EINVAL; >>>> + >>>> + fse->min_width = sensor->sensor_modes[fse->index].width; >>>> + fse->max_width = fse->min_width; >>>> + fse->min_height = sensor->sensor_modes[fse->index].height; >>>> + fse->max_height = fse->min_height; >>>> + >>>> + return 0; >>>> +} >>>> + >>>> +static int vgxy61_enum_frame_interval(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, >>>> + struct v4l2_subdev_frame_interval_enum *fie) >>>> +{ >>>> + struct vgxy61_dev *sensor = to_vgxy61_dev(sd); >>>> + const struct vgxy61_mode_info *mode = sensor->sensor_modes; >>>> + >>>> + if (fie->index >= sensor->sensor_rates_nb) >>>> + return -EINVAL; >>>> + do { >>>> + if (mode->width == fie->width && mode->height == fie->height) >>>> + break; >>>> + } while ((++mode)->width); >>>> + if (!mode->width) >>>> + return -EINVAL; >>>> + >>>> + fie->interval.numerator = 1; >>>> + fie->interval.denominator = sensor->sensor_rates[fie->index]; >>>> + >>>> + return 0; >>>> +} >>>> + >>>> +static int vgxy61_update_analog_gain(struct vgxy61_dev *sensor, u32 target) >>>> +{ >>>> + struct i2c_client *client = sensor->i2c_client; >>>> + unsigned int idx; >>>> + int ret; >>>> + >>>> + /* Find smallest analog gains which is above or equal to target gain */ >>>> + for (idx = 0; idx < ARRAY_SIZE(analog_gains); idx++) { >>>> + if (analog_gains[idx] >= target) >>>> + break; >>>> + } >>>> + /* Cap to maximum gain if no matching gain found */ >>>> + if (idx == ARRAY_SIZE(analog_gains)) >>>> + idx--; >>>> + >>>> + /* Apply gain */ >>>> + ret = vgxy61_write_reg(sensor, DEVICE_ANALOG_GAIN, idx); >>>> + if (ret) >>>> + return ret; >>>> + >>>> + dev_dbg(&client->dev, "Target analog gain: 0x%04x\n", target); >>>> + dev_dbg(&client->dev, " Set analog gain: 0x%04x\n", analog_gains[idx]); >>>> + >>>> + return 0; >>>> +} >>>> + >>>> +static int vgxy61_update_digital_gain(struct vgxy61_dev *sensor, u32 target) >>>> +{ >>>> + struct i2c_client *client = sensor->i2c_client; >>>> + int ret; >>>> + >>>> + /* >>>> + * For a monochrome version, configuring DIGITAL_GAIN_LONG_CH0 and >>>> + * DIGITAL_GAIN_SHORT_CH0 is enough to configure the gain of all >>>> + * four sub pixels. >>>> + */ >>>> + ret = vgxy61_write_reg16(sensor, DEVICE_DIGITAL_GAIN_LONG, target); >>>> + if (ret) >>>> + return ret; >>>> + ret = vgxy61_write_reg16(sensor, DEVICE_DIGITAL_GAIN_SHORT, target); >>>> + if (ret) >>>> + return ret; >>>> + >>>> + dev_dbg(&client->dev, " Set digital gain: 0x%04x\n", target); >>>> + >>>> + return 0; >>>> +} >>>> + >>>> +static int vgxy61_update_patgen(struct vgxy61_dev *sensor, u32 index) >>>> +{ >>>> + u32 pattern = index <= 3 ? index : index + 12; >>>> + u32 reg; >>>> + >>>> + reg = (pattern << 18) | (pattern << 4); >>>> + if (index) >>>> + reg |= (1 << 16) | 1; >>>> + return vgxy61_write_reg32(sensor, DEVICE_PATGEN_CTRL, reg); >>>> +} >>>> + >>>> +static int vgxy61_update_gpiox_strobe_mode(struct vgxy61_dev *sensor, enum strobe_modes mode, >>>> + int idx) >>>> +{ >>>> + const u8 index2val[] = {0x0, 0x1, 0x3}; >>>> + u16 reg; >>>> + int ret; >>>> + >>>> + ret = vgxy61_read_reg16(sensor, DEVICE_SIGNALS_CTRL, ®); >>>> + if (ret) >>>> + return ret; >>>> + reg &= ~(0xf << (idx * 4)); >>>> + reg |= index2val[mode] << (idx * 4); >>>> + >>>> + return vgxy61_write_reg16(sensor, DEVICE_SIGNALS_CTRL, reg); >>>> +} >>>> + >>>> +static int vgxy61_update_gpios_strobe_mode(struct vgxy61_dev *sensor, enum hdr hdr) >>>> +{ >>>> + enum strobe_modes strobe_mode; >>>> + int i, ret; >>>> + >>>> + switch (hdr) { >>>> + case HDR_LINEAR: >>>> + strobe_mode = STROBE_ENABLED; >>>> + break; >>>> + case HDR_SUB: >>>> + case NO_HDR: >>>> + strobe_mode = STROBE_LONG; >>>> + break; >>>> + default: >>>> + /* Should never happen */ >>>> + WARN_ON(true); >>>> + break; >>>> + } >>>> + >>>> + for (i = 0; i < NB_GPIOS; i++) { >>>> + ret = vgxy61_update_gpiox_strobe_mode(sensor, strobe_mode, i); >>>> + if (ret) >>>> + return ret; >>>> + } >>>> + >>>> + return 0; >>>> +} >>>> + >>>> +static int vgxy61_update_gpios_strobe_polarity(struct vgxy61_dev *sensor, int polarity) >>>> +{ >>>> + struct i2c_client *client = sensor->i2c_client; >>>> + int ret; >>>> + >>>> + if (sensor->streaming) >>>> + return -EBUSY; >>>> + >>>> + dev_dbg(&client->dev, "setting gpios polarity: %d\n", polarity); >>>> + >>>> + ret = vgxy61_write_reg(sensor, DEVICE_GPIO_0_CTRL, polarity << 1); >>>> + if (ret) >>>> + return ret; >>>> + ret = vgxy61_write_reg(sensor, DEVICE_GPIO_1_CTRL, polarity << 1); >>>> + if (ret) >>>> + return ret; >>>> + ret = vgxy61_write_reg(sensor, DEVICE_GPIO_2_CTRL, polarity << 1); >>>> + if (ret) >>>> + return ret; >>>> + ret = vgxy61_write_reg(sensor, DEVICE_GPIO_3_CTRL, polarity << 1); >>>> + if (ret) >>>> + return ret; >>>> + return vgxy61_write_reg(sensor, DEVICE_SIGNALS_POLARITY_CTRL, polarity); >>>> +} >>>> + >>>> +static int find_max_long_exposure(struct vgxy61_dev *sensor, int frame_length, int short_expo_ratio) >>>> +{ >>>> + int first_rot_max_expo; >>>> + int second_rot_max_expo; >>>> + >>>> + /* >>>> + * Apply first rule of thumb: >>>> + * frame_length < short_line_nb + sensor->sensor_height + sensor->rot_term >>>> + * with short_line_nb = long_line_nb / short_expo_ratio >>>> + */ >>>> + first_rot_max_expo = ((frame_length - sensor->sensor_height - sensor->rot_term) * >>>> + short_expo_ratio) - 1; >>>> + >>>> + /* >>>> + * Apply second rule of thumb >>>> + * frame_length < short_line_nb + long_line_nb + VGXY61_EXPOS_ROT_TERM >>>> + * with short_line_nb = long_line_nb / short_expo_ratio >>>> + */ >>>> + second_rot_max_expo = (((frame_length - VGXY61_EXPOS_ROT_TERM) * short_expo_ratio) / >>>> + (short_expo_ratio + 1)) - 1; >>>> + >>>> + /* Take the minimum of both rules */ >>>> + return min(first_rot_max_expo, second_rot_max_expo); >>>> +} >>>> + >>>> +static int vgxy61_update_exposure(struct vgxy61_dev *sensor, int long_expo_line_nb, enum hdr hdr, >>>> + bool clamp) >>>> +{ >>>> + struct i2c_client *client = sensor->i2c_client; >>>> + int max_long_expo; >>>> + int max_short_expo = 0; >>>> + int short_expo_line_nb = 0; >>>> + /* We use a constant ratio of 10 for linear HDR mode */ >>>> + int hdr_linear_ratio = 10; >>>> + u16 frame_length; >>>> + int ret; >>>> + >>>> + ret = vgxy61_read_reg16(sensor, DEVICE_FRAME_LENGTH, &frame_length); >>>> + if (ret) >>>> + return ret; >>>> + >>>> + /* Long and short integration times must not be less than 10 lines */ >>>> + long_expo_line_nb = max(10, long_expo_line_nb); >>>> + long_expo_line_nb = min_t(int, frame_length, long_expo_line_nb); >>>> + >>>> + /* Compute short exposure according to hdr mode and long exposure */ >>>> + switch (hdr) { >>>> + case HDR_LINEAR: >>>> + max_long_expo = find_max_long_exposure(sensor, frame_length, hdr_linear_ratio); >>>> + max_short_expo = (max_long_expo + (hdr_linear_ratio / 2)) / hdr_linear_ratio; >>>> + short_expo_line_nb = (long_expo_line_nb + (hdr_linear_ratio / 2)) / >>>> + hdr_linear_ratio; >>>> + break; >>>> + case HDR_SUB: >>>> + max_long_expo = find_max_long_exposure(sensor, frame_length, 1); >>>> + max_short_expo = max_long_expo; >>>> + short_expo_line_nb = long_expo_line_nb; >>>> + break; >>>> + case NO_HDR: >>>> + /* >>>> + * As short expo is 0 here, only the second rule of thumb applies, see >>>> + * find_max_long_exposure for more >>>> + */ >>>> + max_long_expo = frame_length - VGXY61_EXPOS_ROT_TERM; >>>> + break; >>>> + default: >>>> + /* Should never happen */ >>>> + WARN_ON(true); >>>> + break; >>>> + } >>>> + >>>> + if (long_expo_line_nb > max_long_expo) { >>>> + if (!clamp) { >>>> + dev_err(&client->dev, "Exposure %d too high (max for this hdr mode %d)\n", >>>> + long_expo_line_nb, max_long_expo); >>>> + return -EINVAL; >>>> + } >>>> + dev_warn(&client->dev, "Exposure %d too high for this hdr mode, clamping to %d\n", >>>> + long_expo_line_nb, max_long_expo); >>>> + long_expo_line_nb = max_long_expo; >>>> + short_expo_line_nb = max_short_expo; >>>> + } >>>> + >>>> + dev_dbg(&client->dev, "frame_length %d, long_expo_line_nb %d, short_expo_line_nb %d", >>>> + frame_length, long_expo_line_nb, short_expo_line_nb); >>>> + >>>> + /* Apply exposure */ >>>> + sensor->expo_long = long_expo_line_nb; >>>> + sensor->expo_short = short_expo_line_nb; >>>> + >>>> + if (sensor->streaming) >>>> + return apply_exposure(sensor); >>>> + return 0; >>>> +} >>>> + >>>> +static int vgxy61_update_hdr(struct vgxy61_dev *sensor, u32 index) >>>> +{ >>>> + const u8 index2val[] = {0x1, 0x4, 0xa}; >>>> + int ret; >>>> + >>>> + /* >>>> + * Short exposure changes according to HDR mode, do it first as it can >>>> + * violate sensors 'rule of thumbs' and therefore will require to change >>>> + * the long exposure >>>> + */ >>>> + ret = vgxy61_update_exposure(sensor, sensor->expo_long, index, true); >>>> + if (ret) >>>> + return ret; >>>> + >>>> + /* Update strobe mode according to HDR */ >>>> + ret = vgxy61_update_gpios_strobe_mode(sensor, index); >>>> + if (ret) >>>> + return ret; >>>> + >>>> + ret = vgxy61_write_reg(sensor, DEVICE_HDR_CTRL, index2val[index]); >>>> + if (ret) >>>> + return ret; >>>> + sensor->hdr = index; >>>> + >>>> + return 0; >>>> +} >>>> + >>>> +static int vgxy61_get_temp_stream_enabled(struct vgxy61_dev *sensor, int *temp) >>>> +{ >>>> + int ret; >>>> + u16 temperature; >>>> + >>>> + ret = vgxy61_read_reg16(sensor, DEVICE_THSENS1_TEMPERATURE, &temperature); >>>> + if (ret) >>>> + return ret; >>>> + >>>> + /* Temperature is expressed in Kelvin in Q10.2 fixed point format*/ >>>> + temperature = (temperature & 0x0fff) >> 2; >>>> + temperature = kelvin_to_celsius(temperature); >>>> + >>>> + *temp = temperature; >>>> + >>>> + return 0; >>>> +} >>>> + >>>> +static int vgxy61_get_temp_stream_disabled(struct vgxy61_dev *sensor, int *temp) >>>> +{ >>>> + int ret; >>>> + >>>> + /* Device needs to be in standby mode if streaming is off */ >>>> + ret = vgxy61_write_reg(sensor, DEVICE_STBY, STBY_REQ_TMP_READ); >>>> + if (ret) >>>> + return ret; >>>> + ret = vgxy61_poll_reg(sensor, DEVICE_STBY, STBY_NO_REQ); >>>> + if (ret) >>>> + return ret; >>>> + >>>> + return vgxy61_get_temp_stream_enabled(sensor, temp); >>>> +} >>>> + >>>> +static int vgxy61_get_temp(struct vgxy61_dev *sensor, int *temp) >>>> +{ >>>> + *temp = 0; >>>> + if (sensor->streaming) >>>> + return vgxy61_get_temp_stream_enabled(sensor, temp); >>>> + else >>>> + return vgxy61_get_temp_stream_disabled(sensor, temp); >>>> +} >>>> + >>>> +static int vgxy61_s_ctrl(struct v4l2_ctrl *ctrl) >>>> +{ >>>> + struct v4l2_subdev *sd = ctrl_to_sd(ctrl); >>>> + struct vgxy61_dev *sensor = to_vgxy61_dev(sd); >>>> + int ret; >>>> + >>>> + switch (ctrl->id) { >>>> + case V4L2_CID_EXPOSURE: >>>> + ret = vgxy61_update_exposure(sensor, ctrl->val, sensor->hdr, false); >>>> + ctrl->val = sensor->expo_long; >>>> + break; >>>> + case V4L2_CID_ANALOGUE_GAIN: >>>> + ret = vgxy61_update_analog_gain(sensor, ctrl->val); >>>> + break; >>>> + case V4L2_CID_DIGITAL_GAIN: >>>> + ret = vgxy61_update_digital_gain(sensor, ctrl->val); >>>> + break; >>>> + case V4L2_CID_VFLIP: >>>> + case V4L2_CID_HFLIP: >>>> + if (sensor->streaming) { >>>> + ret = -EBUSY; >>>> + break; >>>> + } >>>> + if (ctrl->id == V4L2_CID_VFLIP) >>>> + sensor->vflip = ctrl->val; >>>> + if (ctrl->id == V4L2_CID_HFLIP) >>>> + sensor->hflip = ctrl->val; >>>> + ret = vgxy61_write_reg(sensor, DEVICE_ORIENTATION, >>>> + sensor->hflip | (sensor->vflip << 1)); >>>> + break; >>>> + case V4L2_CID_TEST_PATTERN: >>>> + ret = vgxy61_update_patgen(sensor, ctrl->val); >>>> + break; >>>> + case V4L2_CID_HDR: >>>> + ret = vgxy61_update_hdr(sensor, ctrl->val); >>>> + break; >>>> + case V4L2_CID_GPIOS_STROBE_LONG_START_DELAY: >>>> + ret = vgxy61_write_reg(sensor, DEVICE_STROBE_LONG_START_DELAY, ctrl->val); >>>> + break; >>>> + case V4L2_CID_GPIOS_STROBE_LONG_END_DELAY: >>>> + ret = vgxy61_write_reg(sensor, DEVICE_STROBE_LONG_END_DELAY, ctrl->val); >>>> + break; >>>> + case V4L2_CID_GPIOS_STROBE_SHORT_START_DELAY: >>>> + ret = vgxy61_write_reg(sensor, DEVICE_STROBE_SHORT_START_DELAY, ctrl->val); >>>> + break; >>>> + case V4L2_CID_GPIOS_STROBE_SHORT_END_DELAY: >>>> + ret = vgxy61_write_reg(sensor, DEVICE_STROBE_SHORT_END_DELAY, ctrl->val); >>>> + break; >>>> + default: >>>> + ret = -EINVAL; >>>> + break; >>>> + } >>>> + >>>> + return ret; >>>> +} >>>> + >>>> +static int vgxy61_g_volatile_ctrl(struct v4l2_ctrl *ctrl) >>>> +{ >>>> + struct v4l2_subdev *sd = ctrl_to_sd(ctrl); >>>> + struct vgxy61_dev *sensor = to_vgxy61_dev(sd); >>>> + int temperature; >>>> + int ret; >>>> + >>>> + switch (ctrl->id) { >>>> + case V4L2_CID_TEMPERATURE: >>>> + ret = vgxy61_get_temp(sensor, &temperature); >>>> + if (ret) >>>> + break; >>>> + ret = __v4l2_ctrl_s_ctrl(ctrl, temperature); >>>> + break; >>>> + default: >>>> + ret = -EINVAL; >>>> + break; >>>> + } >>>> + >>>> + return ret; >>>> +} >>>> + >>>> +static const struct v4l2_ctrl_ops vgxy61_ctrl_ops = { >>>> + .g_volatile_ctrl = vgxy61_g_volatile_ctrl, >>>> + .s_ctrl = vgxy61_s_ctrl, >>>> +}; >>>> + >>>> +static const struct v4l2_ctrl_config vgxy61_hdr_ctrl = { >>>> + .ops = &vgxy61_ctrl_ops, >>>> + .id = V4L2_CID_HDR, >>>> + .name = "HDR mode", >>>> + .type = V4L2_CTRL_TYPE_MENU, >>>> + .min = 0, >>>> + .max = ARRAY_SIZE(vgxy61_hdr_modes) - 1, >>>> + .def = NO_HDR, >>>> + .qmenu = vgxy61_hdr_modes, >>>> +}; >>>> + >>>> +static const struct v4l2_ctrl_config vgxy61_strobe_long_start_delay = { >>>> + .ops = &vgxy61_ctrl_ops, >>>> + .id = V4L2_CID_GPIOS_STROBE_LONG_START_DELAY, >>>> + .name = "Long strobe mode start delay in lines", >>>> + .type = V4L2_CTRL_TYPE_INTEGER, >>>> + .min = -128, >>>> + .max = 127, >>>> + .step = 1, >>>> + .def = 0, >>>> + .flags = 0, >>>> +}; >>>> + >>>> +static const struct v4l2_ctrl_config vgxy61_strobe_long_end_delay = { >>>> + .ops = &vgxy61_ctrl_ops, >>>> + .id = V4L2_CID_GPIOS_STROBE_LONG_END_DELAY, >>>> + .name = "Long strobe mode end delay in lines", >>>> + .type = V4L2_CTRL_TYPE_INTEGER, >>>> + .min = -128, >>>> + .max = 127, >>>> + .step = 1, >>>> + .def = 0, >>>> + .flags = 0, >>>> +}; >>>> + >>>> +static const struct v4l2_ctrl_config vgxy61_strobe_short_start_delay = { >>>> + .ops = &vgxy61_ctrl_ops, >>>> + .id = V4L2_CID_GPIOS_STROBE_SHORT_START_DELAY, >>>> + .name = "Short strobe mode start delay in lines", >>>> + .type = V4L2_CTRL_TYPE_INTEGER, >>>> + .min = -128, >>>> + .max = 127, >>>> + .step = 1, >>>> + .def = 0, >>>> + .flags = 0, >>>> +}; >>>> + >>>> +static const struct v4l2_ctrl_config vgxy61_strobe_short_end_delay = { >>>> + .ops = &vgxy61_ctrl_ops, >>>> + .id = V4L2_CID_GPIOS_STROBE_SHORT_END_DELAY, >>>> + .name = "Short strobe mode end delay in lines", >>>> + .type = V4L2_CTRL_TYPE_INTEGER, >>>> + .min = -128, >>>> + .max = 127, >>>> + .step = 1, >>>> + .def = 0, >>>> + .flags = 0, >>>> +}; >>>> + >>>> +static const struct v4l2_ctrl_config vgxy61_temp_ctrl = { >>>> + .ops = &vgxy61_ctrl_ops, >>>> + .id = V4L2_CID_TEMPERATURE, >>>> + .name = "Temperature in °C", >>>> + .type = V4L2_CTRL_TYPE_INTEGER, >>>> + .min = -128, >>>> + .max = 128, >>>> + .step = 1, >>>> +}; >>>> + >>>> +static int vgxy61_init_controls(struct vgxy61_dev *sensor) >>>> +{ >>>> + const struct v4l2_ctrl_ops *ops = &vgxy61_ctrl_ops; >>>> + struct vgxy61_ctrls *ctrls = &sensor->ctrls; >>>> + struct v4l2_ctrl_handler *hdl = &sensor->ctrls.handler; >>>> + int ret; >>>> + >>>> + v4l2_ctrl_handler_init(hdl, 16); >>>> + /* We can use our own mutex for the ctrl lock */ >>>> + hdl->lock = &sensor->lock; >>>> + ctrls->exposure = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_EXPOSURE, 10, 0xffff, 1, >>>> + sensor->expo_long); >>>> + /* This is 8.8 fixed point value */ >>>> + ctrls->analog_gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_ANALOGUE_GAIN, 0, 0x3fff, 1, >>>> + 0x0); >>>> + /* This is 8.8 fixed point value */ >>>> + ctrls->digital_gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_DIGITAL_GAIN, 0, 0xfff, 1, >>>> + 0x100); >>>> + ctrls->vflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_VFLIP, 0, 1, 1, sensor->vflip); >>>> + ctrls->hflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HFLIP, 0, 1, 1, sensor->hflip); >>>> + ctrls->patgen = v4l2_ctrl_new_std_menu_items(hdl, ops, V4L2_CID_TEST_PATTERN, >>>> + ARRAY_SIZE(vgxy61_test_pattern_menu) - 1, >>>> + 0, 0, vgxy61_test_pattern_menu); >>>> + ctrls->hdr = v4l2_ctrl_new_custom(hdl, &vgxy61_hdr_ctrl, NULL); >>>> + ctrls->pixel_rate = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_PIXEL_RATE, 1, INT_MAX, 1, >>>> + get_pixel_rate(sensor)); >>>> + ctrls->pixel_rate->flags |= V4L2_CTRL_FLAG_READ_ONLY; >>>> + ctrls->link_freq = v4l2_ctrl_new_int_menu(hdl, ops, V4L2_CID_LINK_FREQ, >>>> + ARRAY_SIZE(link_freq) - 1, 0, link_freq); >>>> + ctrls->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY; >>>> + /* Gpios ctrls */ >>>> + ctrls->gpios.long_start = v4l2_ctrl_new_custom(hdl, &vgxy61_strobe_long_start_delay, NULL); >>>> + ctrls->gpios.long_end = v4l2_ctrl_new_custom(hdl, &vgxy61_strobe_long_end_delay, NULL); >>>> + ctrls->gpios.short_start = v4l2_ctrl_new_custom(hdl, &vgxy61_strobe_short_start_delay, >>>> + NULL); >>>> + ctrls->gpios.short_end = v4l2_ctrl_new_custom(hdl, &vgxy61_strobe_short_end_delay, NULL); >>>> + /* Temperature ctrl */ >>>> + ctrls->temp = v4l2_ctrl_new_custom(hdl, &vgxy61_temp_ctrl, NULL); >>>> + ctrls->temp->flags |= V4L2_CTRL_FLAG_VOLATILE | V4L2_CTRL_FLAG_READ_ONLY; >>>> + >>>> + if (hdl->error) { >>>> + ret = hdl->error; >>>> + goto free_ctrls; >>>> + } >>>> + >>>> + sensor->sd.ctrl_handler = hdl; >>>> + return 0; >>>> + >>>> +free_ctrls: >>>> + v4l2_ctrl_handler_free(hdl); >>>> + return ret; >>>> +} >>>> + >>>> +static const struct v4l2_subdev_core_ops vgxy61_core_ops = { >>>> +}; >>>> + >>>> +static const struct v4l2_subdev_video_ops vgxy61_video_ops = { >>>> + .s_stream = vgxy61_s_stream, >>>> + .g_frame_interval = vgxy61_g_frame_interval, >>>> + .s_frame_interval = vgxy61_s_frame_interval, >>>> +}; >>>> + >>>> +static const struct v4l2_subdev_pad_ops vgxy61_pad_ops = { >>>> + .enum_mbus_code = vgxy61_enum_mbus_code, >>>> + .get_fmt = vgxy61_get_fmt, >>>> + .set_fmt = vgxy61_set_fmt, >>>> + .enum_frame_size = vgxy61_enum_frame_size, >>>> + .enum_frame_interval = vgxy61_enum_frame_interval, >>>> +}; >>>> + >>>> +static const struct v4l2_subdev_ops vgxy61_subdev_ops = { >>>> + .core = &vgxy61_core_ops, >>>> + .video = &vgxy61_video_ops, >>>> + .pad = &vgxy61_pad_ops, >>>> +}; >>>> + >>>> +static const struct media_entity_operations vgxy61_subdev_entity_ops = { >>>> + .link_validate = v4l2_subdev_link_validate, >>>> +}; >>>> + >>>> +/* Set phy polarities */ >>>> +static int vgxy61_tx_from_ep(struct vgxy61_dev *sensor, struct fwnode_handle *endpoint) >>>> +{ >>>> + struct v4l2_fwnode_endpoint ep = { .bus_type = V4L2_MBUS_CSI2_DPHY }; >>>> + struct i2c_client *client = sensor->i2c_client; >>>> + u32 log2phy[NB_POLARITIES] = {~0, ~0, ~0, ~0, ~0}; >>>> + u32 phy2log[NB_POLARITIES] = {~0, ~0, ~0, ~0, ~0}; >>>> + int polarities[NB_POLARITIES] = {0, 0, 0, 0, 0}; >>>> + int l_nb; >>>> + int p, l; >>>> + int ret; >>>> + int i; >>>> + >>>> + ret = v4l2_fwnode_endpoint_alloc_parse(endpoint, &ep); >>>> + if (ret) >>>> + goto error_alloc; >>>> + >>>> + l_nb = ep.bus.mipi_csi2.num_data_lanes; >>>> + if (l_nb != 1 && l_nb != 2 && l_nb != 4) { >>>> + dev_err(&client->dev, "invalid data lane number %d\n", l_nb); >>>> + goto error_ep; >>>> + } >>>> + >>>> + /* Build log2phy, phy2log and polarities from ep info */ >>>> + log2phy[0] = ep.bus.mipi_csi2.clock_lane; >>>> + phy2log[log2phy[0]] = 0; >>>> + for (l = 1; l < l_nb + 1; l++) { >>>> + log2phy[l] = ep.bus.mipi_csi2.data_lanes[l - 1]; >>>> + phy2log[log2phy[l]] = l; >>>> + } >>>> + /* >>>> + * Then fill remaining slots for every physical slot to have something valid for hardware >>>> + * stuff. >>>> + */ >>>> + for (p = 0; p < NB_POLARITIES; p++) { >>>> + if (phy2log[p] != ~0) >>>> + continue; >>>> + phy2log[p] = l; >>>> + log2phy[l] = p; >>>> + l++; >>>> + } >>>> + for (l = 0; l < l_nb + 1; l++) >>>> + polarities[l] = ep.bus.mipi_csi2.lane_polarities[l]; >>>> + >>>> + if (log2phy[0] != 0) { >>>> + dev_err(&client->dev, "clk lane must be map to physical lane 0\n"); >>>> + goto error_ep; >>>> + } >>>> + sensor->oif_ctrl = (polarities[4] << 15) + ((phy2log[4] - 1) << 13) + >>>> + (polarities[3] << 12) + ((phy2log[3] - 1) << 10) + >>>> + (polarities[2] << 9) + ((phy2log[2] - 1) << 7) + >>>> + (polarities[1] << 6) + ((phy2log[1] - 1) << 4) + >>>> + (polarities[0] << 3) + >>>> + l_nb; >>>> + sensor->nb_of_lane = l_nb; >>>> + >>>> + dev_dbg(&client->dev, "tx uses %d lanes", l_nb); >>>> + for (i = 0; i < 5; i++) { >>>> + dev_dbg(&client->dev, "log2phy[%d] = %d\n", i, log2phy[i]); >>>> + dev_dbg(&client->dev, "phy2log[%d] = %d\n", i, phy2log[i]); >>>> + dev_dbg(&client->dev, "polarity[%d] = %d\n", i, polarities[i]); >>>> + } >>>> + dev_dbg(&client->dev, "oif_ctrl = 0x%04x\n", sensor->oif_ctrl); >>>> + >>>> + v4l2_fwnode_endpoint_free(&ep); >>>> + >>>> + return 0; >>>> + >>>> +error_ep: >>>> + v4l2_fwnode_endpoint_free(&ep); >>>> +error_alloc: >>>> + >>>> + return -EINVAL; >>>> +} >>>> + >>>> +static int vgxy61_configure(struct vgxy61_dev *sensor) >>>> +{ >>>> + struct i2c_client *client = sensor->i2c_client; >>>> + int sensor_freq; >>>> + unsigned int prediv; >>>> + unsigned int mult; >>>> + int ret; >>>> + >>>> + compute_pll_parameters_by_freq(sensor->clk_freq, &prediv, &mult); >>>> + sensor_freq = (mult * sensor->clk_freq) / prediv; >>>> + /* Frequency to data rate is 1:1 ratio for MIPI */ >>>> + sensor->data_rate_in_mbps = sensor_freq; >>>> + /* Video timing ISP path (pixel clock) requires 804/5 mhz = 160 mhz */ >>>> + sensor->pclk = sensor_freq / 5; >>>> + >>>> + /* Cache line_length value */ >>>> + ret = vgxy61_read_reg16(sensor, DEVICE_LINE_LENGTH, &sensor->line_length); >>>> + if (ret) >>>> + return ret; >>>> + /* Configure clocks */ >>>> + ret = vgxy61_write_reg32(sensor, DEVICE_EXT_CLOCK, sensor->clk_freq); >>>> + if (ret) >>>> + return ret; >>>> + ret = vgxy61_write_reg(sensor, DEVICE_CLK_PLL_PREDIV, prediv); >>>> + if (ret) >>>> + return ret; >>>> + ret = vgxy61_write_reg(sensor, DEVICE_CLK_SYS_PLL_MULT, mult); >>>> + if (ret) >>>> + return ret; >>>> + /* Configure interface */ >>>> + ret = vgxy61_write_reg16(sensor, DEVICE_OIF_CTRL, sensor->oif_ctrl); >>>> + if (ret) >>>> + return ret; >>>> + /* Disable pwm compression */ >>>> + ret = vgxy61_write_reg(sensor, DEVICE_FRAME_CONTENT_CTRL, 0); >>>> + if (ret) >>>> + return ret; >>>> + /* Disable asil lines */ >>>> + ret = vgxy61_write_reg(sensor, DEVICE_BYPASS_CTRL, 4); >>>> + if (ret) >>>> + return ret; >>>> + /* Set gpios polarity according to device tree value */ >>>> + ret = vgxy61_update_gpios_strobe_polarity(sensor, sensor->gpios_polarity); >>>> + if (ret) >>>> + return ret; >>>> + /* HDR mode */ >>>> + ret = vgxy61_update_hdr(sensor, sensor->hdr); >>>> + if (ret) >>>> + return ret; >>>> + /* Slave mode */ >>>> + ret = vgxy61_write_reg(sensor, DEVICE_VT_CTRL, sensor->slave_mode); >>>> + if (ret) >>>> + return ret; >>>> + /* Set pattern generator solid to middle value */ >>>> + ret = vgxy61_write_reg16(sensor, DEVICE_PATGEN_LONG_DATA_GR, 0x800); >>>> + if (ret) >>>> + return ret; >>>> + ret = vgxy61_write_reg16(sensor, DEVICE_PATGEN_LONG_DATA_R, 0x800); >>>> + if (ret) >>>> + return ret; >>>> + ret = vgxy61_write_reg16(sensor, DEVICE_PATGEN_LONG_DATA_B, 0x800); >>>> + if (ret) >>>> + return ret; >>>> + ret = vgxy61_write_reg16(sensor, DEVICE_PATGEN_LONG_DATA_GB, 0x800); >>>> + if (ret) >>>> + return ret; >>>> + ret = vgxy61_write_reg16(sensor, DEVICE_PATGEN_SHORT_DATA_GR, 0x800); >>>> + if (ret) >>>> + return ret; >>>> + ret = vgxy61_write_reg16(sensor, DEVICE_PATGEN_SHORT_DATA_R, 0x800); >>>> + if (ret) >>>> + return ret; >>>> + ret = vgxy61_write_reg16(sensor, DEVICE_PATGEN_SHORT_DATA_B, 0x800); >>>> + if (ret) >>>> + return ret; >>>> + ret = vgxy61_write_reg16(sensor, DEVICE_PATGEN_SHORT_DATA_GB, 0x800); >>>> + if (ret) >>>> + return ret; >>>> + >>>> + dev_dbg(&client->dev, "clock prediv = %d\n", prediv); >>>> + dev_dbg(&client->dev, "clock mult = %d\n", mult); >>>> + dev_dbg(&client->dev, "data rate = %d mbps\n", >>>> + sensor->data_rate_in_mbps); >>>> + >>>> + return 0; >>>> +} >>>> + >>>> +static int vgxy61_patch(struct vgxy61_dev *sensor) >>>> +{ >>>> + struct i2c_client *client = sensor->i2c_client; >>>> + u16 patch; >>>> + int ret; >>>> + >>>> + ret = vgxy61_write_array(sensor, DEVICE_FWPATCH_START_ADDR, sizeof(patch_array), >>>> + patch_array); >>>> + if (ret) >>>> + return ret; >>>> + >>>> + ret = vgxy61_write_reg(sensor, DEVICE_STBY, 0x10); >>>> + if (ret) >>>> + return ret; >>>> + >>>> + ret = vgxy61_poll_reg(sensor, DEVICE_STBY, 0); >>>> + if (ret) >>>> + return ret; >>>> + >>>> + ret = vgxy61_read_reg16(sensor, DEVICE_FWPATCH_REVISION, &patch); >>>> + if (ret) >>>> + return ret; >>>> + >>>> + if (patch != (DEVICE_FWPATCH_REVISION_MAJOR << 12) + >>>> + (DEVICE_FWPATCH_REVISION_MINOR << 8) + >>>> + DEVICE_FWPATCH_REVISION_MICRO) { >>>> + dev_err(&client->dev, "bad patch version expected %d.%d.%d got %d.%d.%d\n", >>>> + DEVICE_FWPATCH_REVISION_MAJOR, >>>> + DEVICE_FWPATCH_REVISION_MINOR, >>>> + DEVICE_FWPATCH_REVISION_MICRO, >>>> + patch >> 12, (patch >> 8) & 0x0f, patch & 0xff); >>>> + return -ENODEV; >>>> + } >>>> + dev_dbg(&client->dev, "patch %d.%d.%d applied\n", >>>> + patch >> 12, (patch >> 8) & 0x0f, patch & 0xff); >>>> + >>>> + return 0; >>>> +} >>>> + >>>> +static int vgxy61_detect_cut_version(struct vgxy61_dev *sensor) >>>> +{ >>>> + struct i2c_client *client = sensor->i2c_client; >>>> + u16 device_rev; >>>> + int ret; >>>> + >>>> + ret = vgxy61_read_reg16(sensor, DEVICE_REVISION, &device_rev); >>>> + if (ret) >>>> + return ret; >>>> + >>>> + switch (device_rev >> 8) { >>>> + case 0xA: >>>> + dev_info(&client->dev, "Cut1 detected\n"); >>>> + dev_err(&client->dev, "Cut1 not supported by this driver\n"); >>>> + return -ENODEV; >>>> + case 0xB: >>>> + dev_info(&client->dev, "Cut2 detected\n"); >>>> + return 0; >>>> + case 0xC: >>>> + dev_info(&client->dev, "Cut3 detected\n"); >>>> + return 0; >>>> + default: >>>> + dev_err(&client->dev, "Unable to detect cut version\n"); >>>> + return -ENODEV; >>>> + } >>>> +} >>>> + >>>> +static int vgxy61_detect(struct vgxy61_dev *sensor) >>>> +{ >>>> + struct i2c_client *client = sensor->i2c_client; >>>> + u16 id = 0; >>>> + int ret; >>>> + u8 st; >>>> + >>>> + ret = vgxy61_read_reg16(sensor, DEVICE_MODEL_ID_REG, &id); >>>> + if (ret) >>>> + return ret; >>>> + if (id != VG5661_MODEL_ID && id != VG5761_MODEL_ID) { >>>> + dev_warn(&client->dev, "Unsupported sensor id %x\n", id); >>>> + return -ENODEV; >>>> + } >>>> + dev_dbg(&client->dev, "detected sensor id = 0x%04x\n", id); >>>> + >>>> + if (id == VG5761_MODEL_ID) { >>>> + sensor->sensor_width = VGX761_WIDTH; >>>> + sensor->sensor_height = VGX761_HEIGHT; >>>> + sensor->sensor_modes = vgx761_mode_data; >>>> + sensor->sensor_modes_nb = ARRAY_SIZE(vgx761_mode_data); >>>> + sensor->current_mode = &vgx761_mode_data[VGX761_DEFAULT_MODE]; >>>> + sensor->rot_term = VGX761_SHORT_ROT_TERM; >>>> + sensor->sensor_rates = vgx761_sensor_frame_rates; >>>> + sensor->sensor_rates_nb = ARRAY_SIZE(vgx761_sensor_frame_rates); >>>> + } else if (id == VG5661_MODEL_ID) { >>>> + sensor->sensor_width = VGX661_WIDTH; >>>> + sensor->sensor_height = VGX661_HEIGHT; >>>> + sensor->sensor_modes = vgx661_mode_data; >>>> + sensor->sensor_modes_nb = ARRAY_SIZE(vgx661_mode_data); >>>> + sensor->current_mode = &vgx661_mode_data[VGX661_DEFAULT_MODE]; >>>> + sensor->rot_term = VGX661_SHORT_ROT_TERM; >>>> + sensor->sensor_rates = vgx661_sensor_frame_rates; >>>> + sensor->sensor_rates_nb = ARRAY_SIZE(vgx661_sensor_frame_rates); >>>> + } >>>> + >>>> + ret = vgxy61_wait_state(sensor, SW_STBY); >>>> + if (ret) >>>> + return ret; >>>> + >>>> + ret = vgxy61_read_reg(sensor, DEVICE_NVM, &st); >>>> + if (ret) >>>> + return ret; >>>> + if (st != NVM_OK) >>>> + dev_warn(&client->dev, "Bad nvm state got %d\n", st); >>>> + >>>> + /* Detect cut version */ >>>> + ret = vgxy61_detect_cut_version(sensor); >>>> + if (ret) >>>> + return ret; >>>> + >>>> + return 0; >>>> +} >>>> + >>>> +static int vgxy61_probe(struct i2c_client *client) >>>> +{ >>>> + struct device *dev = &client->dev; >>>> + struct fwnode_handle *endpoint; >>>> + struct vgxy61_dev *sensor; >>>> + int ret; >>>> + >>>> + sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL); >>>> + if (!sensor) >>>> + return -ENOMEM; >>>> + >>>> + sensor->i2c_client = client; >>>> + sensor->streaming = false; >>>> + sensor->fmt.code = MEDIA_BUS_FMT_SGBRG8_1X8; >>>> + sensor->fmt.field = V4L2_FIELD_NONE; >>>> + sensor->fmt.colorspace = V4L2_COLORSPACE_SRGB; >>>> + sensor->frame_interval.numerator = 1; >>>> + sensor->frame_interval.denominator = 60; >>>> + sensor->hdr = NO_HDR; >>>> + sensor->expo_long = 200; >>>> + sensor->expo_short = 0; >>>> + sensor->hflip = false; >>>> + sensor->vflip = false; >>>> + >>>> + endpoint = fwnode_graph_get_next_endpoint(of_fwnode_handle(dev->of_node), NULL); >>>> + if (!endpoint) { >>>> + dev_err(dev, "endpoint node not found\n"); >>>> + return -EINVAL; >>>> + } >>>> + >>>> + ret = vgxy61_tx_from_ep(sensor, endpoint); >>>> + fwnode_handle_put(endpoint); >>>> + if (ret) { >>>> + dev_err(dev, "Failed to parse endpoint %d\n", ret); >>>> + return ret; >>>> + } >>>> + >>>> + sensor->xclk = devm_clk_get(dev, "xclk"); >>>> + if (IS_ERR(sensor->xclk)) { >>>> + dev_err(dev, "failed to get xclk\n"); >>>> + return PTR_ERR(sensor->xclk); >>>> + } >>>> + sensor->clk_freq = clk_get_rate(sensor->xclk); >>>> + if (sensor->clk_freq < 6000000 || sensor->clk_freq > 27000000) { >>>> + dev_err(dev, "Only 6Mhz-27Mhz clock range supported. provide %d Hz\n", >>>> + sensor->clk_freq); >>>> + return -EINVAL; >>>> + } >>>> + sensor->gpios_polarity = of_property_read_bool(dev->of_node, "invert-gpios-polarity"); >>>> + sensor->slave_mode = of_property_read_bool(dev->of_node, "slave-mode"); >>>> + >>>> + v4l2_i2c_subdev_init(&sensor->sd, client, &vgxy61_subdev_ops); >>>> + sensor->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; >>>> + sensor->pad.flags = MEDIA_PAD_FL_SOURCE; >>>> + sensor->sd.entity.ops = &vgxy61_subdev_entity_ops; >>>> + sensor->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; >>>> + >>>> + ret = media_entity_pads_init(&sensor->sd.entity, 1, &sensor->pad); >>>> + if (ret) { >>>> + dev_err(&client->dev, "pads init failed %d\n", ret); >>>> + return ret; >>>> + } >>>> + >>>> + /* Request optional reset pin */ >>>> + sensor->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); >>>> + >>>> + ret = vgxy61_get_regulators(sensor); >>>> + if (ret) { >>>> + dev_err(&client->dev, "failed to get regulators %d\n", ret); >>>> + goto entity_cleanup; >>>> + } >>>> + >>>> + ret = regulator_bulk_enable(VGXY61_NUM_SUPPLIES, sensor->supplies); >>>> + if (ret) { >>>> + dev_err(&client->dev, "failed to enable regulators %d\n", ret); >>>> + goto entity_cleanup; >>>> + } >>>> + >>>> + ret = clk_prepare_enable(sensor->xclk); >>>> + if (ret) { >>>> + dev_err(&client->dev, "failed to enable clock %d\n", ret); >>>> + goto disable_bulk; >>>> + } >>>> + >>>> + mutex_init(&sensor->lock); >>>> + >>>> + /* Apply reset sequence */ >>>> + if (sensor->reset_gpio) { >>>> + ret = vgxy61_apply_reset(sensor); >>>> + if (ret) { >>>> + dev_err(&client->dev, "sensor reset failed %d\n", ret); >>>> + goto disable_clock; >>>> + } >>>> + } >>>> + >>>> + ret = vgxy61_detect(sensor); >>>> + if (ret) { >>>> + dev_err(&client->dev, "sensor detect failed %d\n", ret); >>>> + goto disable_clock; >>>> + } >>>> + sensor->fmt.width = sensor->current_mode->width; >>>> + sensor->fmt.height = sensor->current_mode->height; >>>> + >>>> + ret = vgxy61_patch(sensor); >>>> + if (ret) { >>>> + dev_err(&client->dev, "sensor patch failed %d\n", ret); >>>> + goto disable_clock; >>>> + } >>>> + >>>> + ret = vgxy61_configure(sensor); >>>> + if (ret) { >>>> + dev_err(&client->dev, "sensor configuration failed %d\n", ret); >>>> + goto disable_clock; >>>> + } >>>> + >>>> + ret = vgxy61_init_controls(sensor); >>>> + if (ret) { >>>> + dev_err(&client->dev, "controls initialization failed %d\n", ret); >>>> + goto disable_clock; >>>> + } >>>> + >>>> + ret = v4l2_async_register_subdev(&sensor->sd); >>>> + if (ret) { >>>> + dev_err(&client->dev, "async subdev register failed %d\n", ret); >>>> + goto disable_clock; >>>> + } >>>> + >>>> + dev_info(&client->dev, "vgxy61 probe successfully\n"); >>>> + >>>> + return 0; >>>> + >>>> +disable_clock: >>>> + clk_disable_unprepare(sensor->xclk); >>>> +disable_bulk: >>>> + regulator_bulk_disable(VGXY61_NUM_SUPPLIES, sensor->supplies); >>>> +entity_cleanup: >>>> + mutex_destroy(&sensor->lock); >>>> + media_entity_cleanup(&sensor->sd.entity); >>>> + return ret; >>>> +} >>>> + >>>> +static int vgxy61_remove(struct i2c_client *client) >>>> +{ >>>> + struct v4l2_subdev *sd = i2c_get_clientdata(client); >>>> + struct vgxy61_dev *sensor = to_vgxy61_dev(sd); >>>> + >>>> + v4l2_async_unregister_subdev(&sensor->sd); >>>> + clk_disable_unprepare(sensor->xclk); >>>> + mutex_destroy(&sensor->lock); >>>> + media_entity_cleanup(&sensor->sd.entity); >>>> + regulator_bulk_disable(VGXY61_NUM_SUPPLIES, sensor->supplies); >>>> + >>>> + return 0; >>>> +} >>>> + >>>> +static const struct of_device_id vgxy61_dt_ids[] = { >>>> + { .compatible = "st,st-vgxy61" }, >>>> + { /* sentinel */ } >>>> +}; >>>> +MODULE_DEVICE_TABLE(of, vgxy61_dt_ids); >>>> + >>>> +static struct i2c_driver vgxy61_i2c_driver = { >>>> + .driver = { >>>> + .name = "st-vgxy61", >>>> + .of_match_table = vgxy61_dt_ids, >>>> + }, >>>> + .probe_new = vgxy61_probe, >>>> + .remove = vgxy61_remove, >>>> +}; >>>> + >>>> +module_i2c_driver(vgxy61_i2c_driver); >>>> + >>>> +MODULE_AUTHOR("Benjamin Mugnier <benjamin.mugnier@xxxxxxxxxxx>"); >>>> +MODULE_AUTHOR("Mickael Guene <mickael.guene@xxxxxx>"); >>>> +MODULE_AUTHOR("Sylvain Petinot <sylvain.petinot@xxxxxxxxxxx>"); >>>> +MODULE_DESCRIPTION("VGXY61 camera subdev driver"); >>>> +MODULE_LICENSE("GPL v2"); >>>> -- >>>> 2.25.1 >>>>
