The OV5670 has a powerdown and reset pin, named respectively "PWDN" and "XSHUTDOWN". Optionally probe the gpios connected to the pins during the driver probe routine. Signed-off-by: Jacopo Mondi <jacopo@xxxxxxxxxx> --- drivers/media/i2c/ov5670.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/drivers/media/i2c/ov5670.c b/drivers/media/i2c/ov5670.c index cba310aec011..ca5191d043ce 100644 --- a/drivers/media/i2c/ov5670.c +++ b/drivers/media/i2c/ov5670.c @@ -1842,6 +1842,10 @@ struct ov5670 { /* Regulators */ struct regulator_bulk_data supplies[OV5670_NUM_SUPPLIES]; + /* Power-down and reset gpios. */ + struct gpio_desc *pwdn_gpio; /* PWDNB pin. */ + struct gpio_desc *reset_gpio; /* XSHUTDOWN pin. */ + /* To serialize asynchronus callbacks */ struct mutex mutex; @@ -2494,6 +2498,23 @@ static int ov5670_regulators_probe(struct ov5670 *ov5670) ov5670->supplies); } +static int ov5670_gpio_probe(struct ov5670 *ov5670) +{ + struct i2c_client *client = v4l2_get_subdevdata(&ov5670->sd); + + ov5670->pwdn_gpio = devm_gpiod_get_optional(&client->dev, "pwdn", + GPIOD_OUT_LOW); + if (IS_ERR(ov5670->pwdn_gpio)) + return PTR_ERR(ov5670->pwdn_gpio); + + ov5670->reset_gpio = devm_gpiod_get_optional(&client->dev, "reset", + GPIOD_OUT_LOW); + if (IS_ERR(ov5670->reset_gpio)) + return PTR_ERR(ov5670->reset_gpio); + + return 0; +} + static int ov5670_probe(struct i2c_client *client) { struct ov5670 *ov5670; @@ -2522,6 +2543,12 @@ static int ov5670_probe(struct i2c_client *client) goto error_print; } + ret = ov5670_gpio_probe(ov5670); + if (ret) { + err_msg = "GPIO probe failed"; + goto error_print; + } + full_power = acpi_dev_state_d0(&client->dev); if (full_power) { /* Check module identity */ -- 2.35.1