Re: [PATCH v6 04/13] media: atmel: atmel-isc: implement media controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Eugen

On Thu, Mar 03, 2022 at 05:36:09PM +0200, Eugen Hristev wrote:
> Implement the support for media-controller.
> This means that the capabilities of the driver have changed and now
> it also advertises the IO_MC .
> The driver will register its media device, and add the video entity to this
> media device. The subdevices are registered to the same media device.
> The ISC will have a base entity which is auto-detected as atmel_isc_base.
> It will also register a subdevice that allows cropping of the incoming frame
> to the maximum frame size supported by the ISC.
> The ISC will create a link between the subdevice that is asynchronously
> registered and the atmel_isc_scaler entity.
> Then, the atmel_isc_scaler and atmel_isc_base are connected through another
> link.
>
> Signed-off-by: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
> ---
> Changes in v6:
> - reworked a bit as suggested by Jacopo
> - add try crops
>
> Changes in v5:
> - reworked s_fmt to pass the same format from sink to source
> - simplified enum_mbus_code
> - separated tgt and bounds to report correctly in g_sel
>
> Changes in v4:
> As suggested by Jacopo:
> - renamed atmel_isc_mc to atmel_isc_scaler.c
> - moved init_mc/clean_mc to isc_base file
>
> Changes in v2:
> - implement try formats
>
>  drivers/media/platform/atmel/Makefile         |   2 +-
>  drivers/media/platform/atmel/atmel-isc-base.c |  75 ++++-
>  .../media/platform/atmel/atmel-isc-scaler.c   | 271 ++++++++++++++++++
>  drivers/media/platform/atmel/atmel-isc.h      |  37 +++
>  .../media/platform/atmel/atmel-sama5d2-isc.c  |  14 +-
>  .../media/platform/atmel/atmel-sama7g5-isc.c  |  12 +-
>  6 files changed, 403 insertions(+), 8 deletions(-)
>  create mode 100644 drivers/media/platform/atmel/atmel-isc-scaler.c
>
> diff --git a/drivers/media/platform/atmel/Makefile b/drivers/media/platform/atmel/Makefile
> index 794e8f739287..f02d03df89d6 100644
> --- a/drivers/media/platform/atmel/Makefile
> +++ b/drivers/media/platform/atmel/Makefile
> @@ -1,7 +1,7 @@
>  # SPDX-License-Identifier: GPL-2.0-only
>  atmel-isc-objs = atmel-sama5d2-isc.o
>  atmel-xisc-objs = atmel-sama7g5-isc.o
> -atmel-isc-common-objs = atmel-isc-base.o atmel-isc-clk.o
> +atmel-isc-common-objs = atmel-isc-base.o atmel-isc-clk.o atmel-isc-scaler.o
>
>  obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel-isi.o
>  obj-$(CONFIG_VIDEO_ATMEL_ISC_BASE) += atmel-isc-common.o
> diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
> index 67b4a2323fed..448bf281c61a 100644
> --- a/drivers/media/platform/atmel/atmel-isc-base.c
> +++ b/drivers/media/platform/atmel/atmel-isc-base.c
> @@ -1712,6 +1712,7 @@ static int isc_async_bound(struct v4l2_async_notifier *notifier,
>  					      struct isc_device, v4l2_dev);
>  	struct isc_subdev_entity *subdev_entity =
>  		container_of(notifier, struct isc_subdev_entity, notifier);
> +	int pad;
>
>  	if (video_is_registered(&isc->video_dev)) {
>  		v4l2_err(&isc->v4l2_dev, "only supports one sub-device.\n");
> @@ -1720,6 +1721,16 @@ static int isc_async_bound(struct v4l2_async_notifier *notifier,
>
>  	subdev_entity->sd = subdev;
>
> +	pad = media_entity_get_fwnode_pad(&subdev->entity, asd->match.fwnode,
> +					  MEDIA_PAD_FL_SOURCE);
> +	if (pad < 0) {
> +		v4l2_err(&isc->v4l2_dev, "failed to find pad for %s\n",
> +			 subdev->name);
> +		return pad;
> +	}
> +
> +	isc->remote_pad = pad;
> +
>  	return 0;
>  }
>
> @@ -1734,8 +1745,8 @@ static void isc_async_unbind(struct v4l2_async_notifier *notifier,
>  	v4l2_ctrl_handler_free(&isc->ctrls.handler);
>  }
>
> -static struct isc_format *find_format_by_code(struct isc_device *isc,
> -					      unsigned int code, int *index)
> +struct isc_format *isc_find_format_by_code(struct isc_device *isc,
> +					   unsigned int code, int *index)
>  {
>  	struct isc_format *fmt = &isc->formats_list[0];
>  	unsigned int i;
> @@ -1751,6 +1762,7 @@ static struct isc_format *find_format_by_code(struct isc_device *isc,
>
>  	return NULL;
>  }
> +EXPORT_SYMBOL_GPL(isc_find_format_by_code);
>
>  static int isc_formats_init(struct isc_device *isc)
>  {
> @@ -1767,7 +1779,7 @@ static int isc_formats_init(struct isc_device *isc)
>  	       NULL, &mbus_code)) {
>  		mbus_code.index++;
>
> -		fmt = find_format_by_code(isc, mbus_code.code, &i);
> +		fmt = isc_find_format_by_code(isc, mbus_code.code, &i);
>  		if (!fmt) {
>  			v4l2_warn(&isc->v4l2_dev, "Mbus code %x not supported\n",
>  				  mbus_code.code);
> @@ -1893,7 +1905,8 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
>  	vdev->queue		= q;
>  	vdev->lock		= &isc->lock;
>  	vdev->ctrl_handler	= &isc->ctrls.handler;
> -	vdev->device_caps	= V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE;
> +	vdev->device_caps	= V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE |
> +				  V4L2_CAP_IO_MC;
>  	video_set_drvdata(vdev, isc);
>
>  	ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1);
> @@ -1903,8 +1916,19 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
>  		goto isc_async_complete_err;
>  	}
>
> +	ret = isc_scaler_link(isc);
> +	if (ret < 0)
> +		goto isc_async_complete_unregister_device;
> +
> +	ret = media_device_register(&isc->mdev);
> +	if (ret < 0)
> +		goto isc_async_complete_unregister_device;
> +
>  	return 0;
>
> +isc_async_complete_unregister_device:
> +	video_unregister_device(vdev);
> +
>  isc_async_complete_err:
>  	mutex_destroy(&isc->lock);
>  	return ret;
> @@ -1971,6 +1995,49 @@ int isc_pipeline_init(struct isc_device *isc)
>  }
>  EXPORT_SYMBOL_GPL(isc_pipeline_init);
>
> +int isc_mc_init(struct isc_device *isc, u32 ver)
> +{
> +	const struct of_device_id *match;
> +	int ret;
> +
> +	isc->video_dev.entity.function = MEDIA_ENT_F_IO_V4L;
> +	isc->video_dev.entity.flags = MEDIA_ENT_FL_DEFAULT;
> +	isc->pads[ISC_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
> +
> +	ret = media_entity_pads_init(&isc->video_dev.entity, ISC_PADS_NUM,
> +				     isc->pads);
> +	if (ret < 0) {
> +		dev_err(isc->dev, "media entity init failed\n");
> +		return ret;
> +	}
> +
> +	isc->mdev.dev = isc->dev;
> +
> +	match = of_match_node(isc->dev->driver->of_match_table,
> +			      isc->dev->of_node);
> +
> +	strscpy(isc->mdev.driver_name, KBUILD_MODNAME,
> +		sizeof(isc->mdev.driver_name));
> +	strscpy(isc->mdev.model, match->compatible, sizeof(isc->mdev.model));
> +	snprintf(isc->mdev.bus_info, sizeof(isc->mdev.bus_info), "platform:%s",
> +		 isc->v4l2_dev.name);
> +	isc->mdev.hw_revision = ver;
> +
> +	media_device_init(&isc->mdev);
> +
> +	isc->v4l2_dev.mdev = &isc->mdev;
> +
> +	return isc_scaler_init(isc);
> +}
> +EXPORT_SYMBOL_GPL(isc_mc_init);
> +
> +void isc_mc_cleanup(struct isc_device *isc)
> +{
> +	media_entity_cleanup(&isc->video_dev.entity);
> +	media_device_cleanup(&isc->mdev);
> +}
> +EXPORT_SYMBOL_GPL(isc_mc_cleanup);
> +
>  /* regmap configuration */
>  #define ATMEL_ISC_REG_MAX    0xd5c
>  const struct regmap_config isc_regmap_config = {
> diff --git a/drivers/media/platform/atmel/atmel-isc-scaler.c b/drivers/media/platform/atmel/atmel-isc-scaler.c
> new file mode 100644
> index 000000000000..305524c1123e
> --- /dev/null
> +++ b/drivers/media/platform/atmel/atmel-isc-scaler.c
> @@ -0,0 +1,271 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Microchip Image Sensor Controller (ISC) Scaler entity support
> + *
> + * Copyright (C) 2022 Microchip Technology, Inc.
> + *
> + * Author: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
> + *
> + */
> +
> +#include <media/media-device.h>
> +#include <media/media-entity.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-subdev.h>
> +
> +#include "atmel-isc-regs.h"
> +#include "atmel-isc.h"
> +
> +static void isc_scaler_prepare_fmt(struct v4l2_mbus_framefmt *framefmt)
> +{
> +	framefmt->colorspace = V4L2_COLORSPACE_SRGB;
> +	framefmt->field = V4L2_FIELD_NONE;
> +	framefmt->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
> +	framefmt->quantization = V4L2_QUANTIZATION_DEFAULT;
> +	framefmt->xfer_func = V4L2_XFER_FUNC_DEFAULT;
> +};
> +
> +static int isc_scaler_get_fmt(struct v4l2_subdev *sd,
> +			      struct v4l2_subdev_state *sd_state,
> +			      struct v4l2_subdev_format *format)
> +{
> +	struct isc_device *isc = container_of(sd, struct isc_device, scaler_sd);
> +	struct v4l2_mbus_framefmt *v4l2_try_fmt;
> +
> +	if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
> +		v4l2_try_fmt = v4l2_subdev_get_try_format(sd, sd_state,
> +							  format->pad);
> +		format->format = *v4l2_try_fmt;
> +
> +		return 0;
> +	}
> +
> +	format->format = isc->scaler_format[format->pad];
> +
> +	return 0;
> +}
> +
> +static int isc_scaler_set_fmt(struct v4l2_subdev *sd,
> +			      struct v4l2_subdev_state *sd_state,
> +			      struct v4l2_subdev_format *req_fmt)
> +{
> +	struct isc_device *isc = container_of(sd, struct isc_device, scaler_sd);
> +	struct v4l2_mbus_framefmt *v4l2_try_fmt;
> +	struct isc_format *fmt;
> +	unsigned int i;
> +
> +	/* Source format is fixed, we cannot change it */
> +	if (req_fmt->pad == ISC_SCALER_PAD_SOURCE) {
> +		req_fmt->format = isc->scaler_format[ISC_SCALER_PAD_SOURCE];
> +		return 0;
> +	}
> +
> +	/* There is no limit on the frame size on the sink pad */
> +	v4l_bound_align_image(&req_fmt->format.width, 16, UINT_MAX, 0,
> +			      &req_fmt->format.height, 16, UINT_MAX, 0, 0);
> +
> +	isc_scaler_prepare_fmt(&req_fmt->format);
> +
> +	fmt = isc_find_format_by_code(isc, req_fmt->format.code, &i);
> +
> +	if (!fmt)
> +		fmt = &isc->formats_list[0];
> +
> +	req_fmt->format.code = fmt->mbus_code;
> +
> +	if (req_fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
> +		v4l2_try_fmt = v4l2_subdev_get_try_format(sd, sd_state,
> +							  req_fmt->pad);
> +		*v4l2_try_fmt = req_fmt->format;
> +		/* Trying on the sink pad makes the source pad change too */
> +		v4l2_try_fmt = v4l2_subdev_get_try_format(sd, sd_state,
> +							  ISC_SCALER_PAD_SOURCE);
> +		*v4l2_try_fmt = req_fmt->format;
> +
> +		v4l_bound_align_image(&v4l2_try_fmt->width,
> +				      16, isc->max_width, 0,
> +				      &v4l2_try_fmt->height,
> +				      16, isc->max_height, 0, 0);
> +		/* if we are just trying, we are done */
> +		return 0;
> +	}
> +
> +	isc->scaler_format[ISC_SCALER_PAD_SINK] = req_fmt->format;
> +
> +	/* The source pad is the same as the sink, but we have to crop it */
> +	isc->scaler_format[ISC_SCALER_PAD_SOURCE] =
> +		isc->scaler_format[ISC_SCALER_PAD_SINK];
> +	v4l_bound_align_image
> +		(&isc->scaler_format[ISC_SCALER_PAD_SOURCE].width, 16,
> +		 isc->max_width, 0,
> +		 &isc->scaler_format[ISC_SCALER_PAD_SOURCE].height, 16,
> +		 isc->max_height, 0, 0);
> +
> +	return 0;
> +}
> +
> +static int isc_scaler_enum_mbus_code(struct v4l2_subdev *sd,
> +				     struct v4l2_subdev_state *sd_state,
> +				     struct v4l2_subdev_mbus_code_enum *code)
> +{
> +	struct isc_device *isc = container_of(sd, struct isc_device, scaler_sd);
> +
> +	/*
> +	 * All formats supported by the ISC are supported by the scaler.
> +	 * Advertise the formats which the ISC can take as input, as the scaler
> +	 * entity cropping is part of the PFE module (parallel front end)
> +	 */
> +	if (code->index < isc->formats_list_size) {
> +		code->code = isc->formats_list[code->index].mbus_code;
> +		return 0;
> +	}
> +
> +	return -EINVAL;
> +}
> +
> +static int isc_scaler_g_sel(struct v4l2_subdev *sd,
> +			    struct v4l2_subdev_state *sd_state,
> +			    struct v4l2_subdev_selection *sel)
> +{
> +	struct isc_device *isc = container_of(sd, struct isc_device, scaler_sd);
> +
> +	if (sel->pad == ISC_SCALER_PAD_SOURCE)
> +		return -EINVAL;
> +
> +	if (sel->target == V4L2_SEL_TGT_CROP_BOUNDS) {
> +		/* bounds are the input format received */
> +		sel->r.height = isc->scaler_format[ISC_SCALER_PAD_SINK].height;
> +		sel->r.width = isc->scaler_format[ISC_SCALER_PAD_SINK].width;

I'll re-paste our discussion on v4 to make sure we're on the same page

-------------------------------------------------------------------------------
> >> +     if (sel->pad == ISC_SCALER_PAD_SOURCE)
> >> +             return -EINVAL;
> >> +
> >> +     if (sel->target != V4L2_SEL_TGT_CROP_BOUNDS &&
> >> +         sel->target != V4L2_SEL_TGT_CROP)
> >> +             return -EINVAL;
> >> +
> >> +     sel->r.height = isc->max_height;
> >> +     sel->r.width = isc->max_width;
> >
> > The CROP_BOUNDS should be set to the same size as the sink pad image format,
> > as it represents the maximum valid crop rectangle.
> >
> > TGT_CROP should report the configured crop rectangle which can be
> > intiialized to the same size as CROP_BOUNDS, if my understanding of
> > the spec is correct
>
> So you would like to have this differentiated, and report the
> CROP_BOUNDS to whatever is on the sink pad, and the TGT_CROP to what is
> reported now, the maximum size of the ISC frame .
> My understanding is correct ?
>

I didn't know you have an HW limitation, so your _BOUNDS is not the
input image size but rather 3264x2464 ( == max_width x max_height).

What I meant is that _BOUNDS should report the maximum rectangle size
that can be applied to the _CROP target. In you case you have an HW
limitation 3264x2464 and that's the largest rectangle you can apply.
TGT_CROP can be initialized to the same as _BOUND, but if you
implement s_selection it should report what has been there applied.
But as you don't implement s_selection yet, I think this is fine for
now. Maybe a little comment ?
-------------------------------------------------------------------------------

I think then that _BOUNDS should be fixed to 3264x2464 and CROP to
src_fmt.

The rest looks good! Thanks for pushing up to this version and thanks
for addressings comments!

Reviewed-by: Jacopo Mondi <jacopo@xxxxxxxxxx>

Thanks
  j

> +		sel->r.left = 0;
> +		sel->r.top = 0;
> +	} else if (sel->target == V4L2_SEL_TGT_CROP) {
> +		/*
> +		 * crop is done to the output format,
> +		 * limited by ISC maximum size
> +		 */
> +		sel->r.height = isc->scaler_format[ISC_SCALER_PAD_SOURCE].height;
> +		sel->r.width = isc->scaler_format[ISC_SCALER_PAD_SOURCE].width;
> +		sel->r.left = 0;
> +		sel->r.top = 0;
> +	} else {
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static int isc_scaler_init_cfg(struct v4l2_subdev *sd,
> +			       struct v4l2_subdev_state *sd_state)
> +{
> +	struct v4l2_mbus_framefmt *v4l2_try_fmt =
> +		v4l2_subdev_get_try_format(sd, sd_state, 0);
> +	struct v4l2_rect *try_crop;
> +	struct isc_device *isc = container_of(sd, struct isc_device, scaler_sd);
> +
> +	*v4l2_try_fmt = isc->scaler_format[ISC_SCALER_PAD_SOURCE];
> +
> +	try_crop = v4l2_subdev_get_try_crop(sd, sd_state, 0);
> +
> +	try_crop->top = 0;
> +	try_crop->left = 0;
> +	try_crop->width = v4l2_try_fmt->width;
> +	try_crop->height = v4l2_try_fmt->height;
> +
> +	return 0;
> +}
> +
> +static const struct v4l2_subdev_pad_ops isc_scaler_pad_ops = {
> +	.enum_mbus_code = isc_scaler_enum_mbus_code,
> +	.set_fmt = isc_scaler_set_fmt,
> +	.get_fmt = isc_scaler_get_fmt,
> +	.get_selection = isc_scaler_g_sel,
> +	.init_cfg = isc_scaler_init_cfg,
> +};
> +
> +static const struct v4l2_subdev_ops xisc_scaler_subdev_ops = {
> +	.pad = &isc_scaler_pad_ops,
> +};
> +
> +int isc_scaler_init(struct isc_device *isc)
> +{
> +	int ret;
> +
> +	v4l2_subdev_init(&isc->scaler_sd, &xisc_scaler_subdev_ops);
> +
> +	isc->scaler_sd.owner = THIS_MODULE;
> +	isc->scaler_sd.dev = isc->dev;
> +	snprintf(isc->scaler_sd.name, sizeof(isc->scaler_sd.name),
> +		 "atmel_isc_scaler");
> +
> +	isc->scaler_sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> +	isc->scaler_sd.entity.function = MEDIA_ENT_F_PROC_VIDEO_SCALER;
> +	isc->scaler_pads[ISC_SCALER_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
> +	isc->scaler_pads[ISC_SCALER_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
> +
> +	isc_scaler_prepare_fmt(&isc->scaler_format[ISC_SCALER_PAD_SOURCE]);
> +	isc->scaler_format[ISC_SCALER_PAD_SOURCE].height = isc->max_height;
> +	isc->scaler_format[ISC_SCALER_PAD_SOURCE].width = isc->max_width;
> +	isc->scaler_format[ISC_SCALER_PAD_SOURCE].code =
> +		 isc->formats_list[0].mbus_code;
> +
> +	isc->scaler_format[ISC_SCALER_PAD_SINK] =
> +		 isc->scaler_format[ISC_SCALER_PAD_SOURCE];
> +
> +	ret = media_entity_pads_init(&isc->scaler_sd.entity,
> +				     ISC_SCALER_PADS_NUM,
> +				     isc->scaler_pads);
> +	if (ret < 0) {
> +		dev_err(isc->dev, "scaler sd media entity init failed\n");
> +		return ret;
> +	}
> +
> +	ret = v4l2_device_register_subdev(&isc->v4l2_dev, &isc->scaler_sd);
> +	if (ret < 0) {
> +		dev_err(isc->dev, "scaler sd failed to register subdev\n");
> +		return ret;
> +	}
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(isc_scaler_init);
> +
> +int isc_scaler_link(struct isc_device *isc)
> +{
> +	int ret;
> +
> +	ret = media_create_pad_link(&isc->current_subdev->sd->entity,
> +				    isc->remote_pad, &isc->scaler_sd.entity,
> +				    ISC_SCALER_PAD_SINK,
> +				    MEDIA_LNK_FL_ENABLED |
> +				    MEDIA_LNK_FL_IMMUTABLE);
> +
> +	if (ret < 0) {
> +		dev_err(isc->dev, "Failed to create pad link: %s to %s\n",
> +			isc->current_subdev->sd->entity.name,
> +			isc->scaler_sd.entity.name);
> +		return ret;
> +	}
> +
> +	dev_dbg(isc->dev, "link with %s pad: %d\n",
> +		isc->current_subdev->sd->name, isc->remote_pad);
> +
> +	ret = media_create_pad_link(&isc->scaler_sd.entity,
> +				    ISC_SCALER_PAD_SOURCE,
> +				    &isc->video_dev.entity, ISC_PAD_SINK,
> +				    MEDIA_LNK_FL_ENABLED |
> +				    MEDIA_LNK_FL_IMMUTABLE);
> +
> +	if (ret < 0) {
> +		dev_err(isc->dev, "Failed to create pad link: %s to %s\n",
> +			isc->scaler_sd.entity.name,
> +			isc->video_dev.entity.name);
> +		return ret;
> +	}
> +
> +	dev_dbg(isc->dev, "link with %s pad: %d\n", isc->scaler_sd.name,
> +		ISC_SCALER_PAD_SOURCE);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(isc_scaler_link);
> +
> diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h
> index f9ad7ec6bd13..9cc69c3ae26d 100644
> --- a/drivers/media/platform/atmel/atmel-isc.h
> +++ b/drivers/media/platform/atmel/atmel-isc.h
> @@ -183,6 +183,17 @@ struct isc_reg_offsets {
>  	u32 his_entry;
>  };
>
> +enum isc_mc_pads {
> +	ISC_PAD_SINK	= 0,
> +	ISC_PADS_NUM	= 1,
> +};
> +
> +enum isc_scaler_pads {
> +	ISC_SCALER_PAD_SINK	= 0,
> +	ISC_SCALER_PAD_SOURCE	= 1,
> +	ISC_SCALER_PADS_NUM	= 2,
> +};
> +
>  /*
>   * struct isc_device - ISC device driver data/config struct
>   * @regmap:		Register map
> @@ -258,6 +269,12 @@ struct isc_reg_offsets {
>   *			be used as an input to the controller
>   * @controller_formats_size:	size of controller_formats array
>   * @formats_list_size:	size of formats_list array
> + * @pads:		media controller pads for isc video entity
> + * @mdev:		media device that is registered by the isc
> + * @remote_pad:		remote pad on the connected subdevice
> + * @scaler_sd:		subdevice for the scaler that isc registers
> + * @scaler_pads:	media controller pads for the scaler subdevice
> + * @scaler_format:	current format for the scaler subdevice
>   */
>  struct isc_device {
>  	struct regmap		*regmap;
> @@ -346,6 +363,19 @@ struct isc_device {
>  	struct isc_format		*formats_list;
>  	u32				controller_formats_size;
>  	u32				formats_list_size;
> +
> +	struct {
> +		struct media_pad		pads[ISC_PADS_NUM];
> +		struct media_device		mdev;
> +
> +		u32				remote_pad;
> +	};
> +
> +	struct {
> +		struct v4l2_subdev		scaler_sd;
> +		struct media_pad		scaler_pads[ISC_SCALER_PADS_NUM];
> +		struct v4l2_mbus_framefmt	scaler_format[ISC_SCALER_PADS_NUM];
> +	};
>  };
>
>  extern const struct regmap_config isc_regmap_config;
> @@ -357,4 +387,11 @@ int isc_clk_init(struct isc_device *isc);
>  void isc_subdev_cleanup(struct isc_device *isc);
>  void isc_clk_cleanup(struct isc_device *isc);
>
> +int isc_scaler_link(struct isc_device *isc);
> +int isc_scaler_init(struct isc_device *isc);
> +int isc_mc_init(struct isc_device *isc, u32 ver);
> +void isc_mc_cleanup(struct isc_device *isc);
> +
> +struct isc_format *isc_find_format_by_code(struct isc_device *isc,
> +					   unsigned int code, int *index);
>  #endif
> diff --git a/drivers/media/platform/atmel/atmel-sama5d2-isc.c b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
> index c5b9563e36cb..c244682ea22f 100644
> --- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
> +++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
> @@ -553,6 +553,12 @@ static int atmel_isc_probe(struct platform_device *pdev)
>  			break;
>  	}
>
> +	regmap_read(isc->regmap, ISC_VERSION + isc->offsets.version, &ver);
> +
> +	ret = isc_mc_init(isc, ver);
> +	if (ret < 0)
> +		goto isc_probe_mc_init_err;
> +
>  	pm_runtime_set_active(dev);
>  	pm_runtime_enable(dev);
>  	pm_request_idle(dev);
> @@ -562,7 +568,7 @@ static int atmel_isc_probe(struct platform_device *pdev)
>  	ret = clk_prepare_enable(isc->ispck);
>  	if (ret) {
>  		dev_err(dev, "failed to enable ispck: %d\n", ret);
> -		goto cleanup_subdev;
> +		goto isc_probe_mc_init_err;
>  	}
>
>  	/* ispck should be greater or equal to hclock */
> @@ -572,7 +578,6 @@ static int atmel_isc_probe(struct platform_device *pdev)
>  		goto unprepare_clk;
>  	}
>
> -	regmap_read(isc->regmap, ISC_VERSION + isc->offsets.version, &ver);
>  	dev_info(dev, "Microchip ISC version %x\n", ver);
>
>  	return 0;
> @@ -580,6 +585,9 @@ static int atmel_isc_probe(struct platform_device *pdev)
>  unprepare_clk:
>  	clk_disable_unprepare(isc->ispck);
>
> +isc_probe_mc_init_err:
> +	isc_mc_cleanup(isc);
> +
>  cleanup_subdev:
>  	isc_subdev_cleanup(isc);
>
> @@ -600,6 +608,8 @@ static int atmel_isc_remove(struct platform_device *pdev)
>
>  	pm_runtime_disable(&pdev->dev);
>
> +	isc_mc_cleanup(isc);
> +
>  	isc_subdev_cleanup(isc);
>
>  	v4l2_device_unregister(&isc->v4l2_dev);
> diff --git a/drivers/media/platform/atmel/atmel-sama7g5-isc.c b/drivers/media/platform/atmel/atmel-sama7g5-isc.c
> index 07a80b08bc54..9dc75eed0098 100644
> --- a/drivers/media/platform/atmel/atmel-sama7g5-isc.c
> +++ b/drivers/media/platform/atmel/atmel-sama7g5-isc.c
> @@ -547,15 +547,23 @@ static int microchip_xisc_probe(struct platform_device *pdev)
>  			break;
>  	}
>
> +	regmap_read(isc->regmap, ISC_VERSION + isc->offsets.version, &ver);
> +
> +	ret = isc_mc_init(isc, ver);
> +	if (ret < 0)
> +		goto isc_probe_mc_init_err;
> +
>  	pm_runtime_set_active(dev);
>  	pm_runtime_enable(dev);
>  	pm_request_idle(dev);
>
> -	regmap_read(isc->regmap, ISC_VERSION + isc->offsets.version, &ver);
>  	dev_info(dev, "Microchip XISC version %x\n", ver);
>
>  	return 0;
>
> +isc_probe_mc_init_err:
> +	isc_mc_cleanup(isc);
> +
>  cleanup_subdev:
>  	isc_subdev_cleanup(isc);
>
> @@ -576,6 +584,8 @@ static int microchip_xisc_remove(struct platform_device *pdev)
>
>  	pm_runtime_disable(&pdev->dev);
>
> +	isc_mc_cleanup(isc);
> +
>  	isc_subdev_cleanup(isc);
>
>  	v4l2_device_unregister(&isc->v4l2_dev);
> --
> 2.25.1
>



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux