The Fujitsu M5MOLS sensor driver is using a reset GPIO number
passed from platform data.
No machine/board descriptor file in the kernel is using this so
let's replace it with a GPIO descriptor.
Cc: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
Cc: Heungjun Kim <riverful.kim@xxxxxxxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
drivers/media/i2c/m5mols/m5mols.h | 2 ++
drivers/media/i2c/m5mols/m5mols_capture.c | 1 -
drivers/media/i2c/m5mols/m5mols_core.c | 29 ++++++++---------------
3 files changed, 12 insertions(+), 20 deletions(-)
diff --git a/drivers/media/i2c/m5mols/m5mols.h b/drivers/media/i2c/m5mols/m5mols.h
index 60c102fa7df5..b56eb0a8ee97 100644
--- a/drivers/media/i2c/m5mols/m5mols.h
+++ b/drivers/media/i2c/m5mols/m5mols.h
@@ -13,6 +13,7 @@
#define M5MOLS_H
#include <linux/sizes.h>
+#include <linux/gpio/consumer.h>
#include <media/v4l2-subdev.h>
#include "m5mols_reg.h"
@@ -224,6 +225,7 @@ struct m5mols_info {
struct v4l2_ctrl *jpeg_quality;
int (*set_power)(struct device *dev, int on);
+ struct gpio_desc *reset;
struct mutex lock;
diff --git a/drivers/media/i2c/m5mols/m5mols_capture.c b/drivers/media/i2c/m5mols/m5mols_capture.c
index e1b1d689c044..275c5b2539fd 100644
--- a/drivers/media/i2c/m5mols/m5mols_capture.c
+++ b/drivers/media/i2c/m5mols/m5mols_capture.c
@@ -15,7 +15,6 @@
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
-#include <linux/gpio.h>
#include <linux/regulator/consumer.h>
#include <linux/videodev2.h>
#include <media/v4l2-ctrls.h>
diff --git a/drivers/media/i2c/m5mols/m5mols_core.c b/drivers/media/i2c/m5mols/m5mols_core.c
index e29be0242f07..c19590389bfe 100644
--- a/drivers/media/i2c/m5mols/m5mols_core.c
+++ b/drivers/media/i2c/m5mols/m5mols_core.c
@@ -14,7 +14,7 @@
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/regulator/consumer.h>
#include <linux/videodev2.h>
#include <linux/module.h>
@@ -752,7 +752,6 @@ static int m5mols_sensor_power(struct m5mols_info *info, bool enable)
{
struct v4l2_subdev *sd = &info->sd;
struct i2c_client *client = v4l2_get_subdevdata(sd);
- const struct m5mols_platform_data *pdata = info->pdata;
int ret;
if (info->power == enable)
@@ -772,7 +771,7 @@ static int m5mols_sensor_power(struct m5mols_info *info, bool enable)
return ret;
}
- gpio_set_value(pdata->gpio_reset, !pdata->reset_polarity);
+ gpiod_set_value(info->reset, 0);
info->power = 1;
return ret;
@@ -785,7 +784,7 @@ static int m5mols_sensor_power(struct m5mols_info *info, bool enable)
if (info->set_power)
info->set_power(&client->dev, 0);
- gpio_set_value(pdata->gpio_reset, pdata->reset_polarity);
+ gpiod_set_value(info->reset, 1);
info->isp_ready = 0;
info->power = 0;
@@ -944,7 +943,6 @@ static int m5mols_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
const struct m5mols_platform_data *pdata = client->dev.platform_data;
- unsigned long gpio_flags;
struct m5mols_info *info;
struct v4l2_subdev *sd;
int ret;
@@ -954,11 +952,6 @@ static int m5mols_probe(struct i2c_client *client,
return -EINVAL;
}
- if (!gpio_is_valid(pdata->gpio_reset)) {
- dev_err(&client->dev, "No valid RESET GPIO specified\n");
- return -EINVAL;
- }
-
if (!client->irq) {
dev_err(&client->dev, "Interrupt not assigned\n");
return -EINVAL;
@@ -968,18 +961,16 @@ static int m5mols_probe(struct i2c_client *client,
if (!info)
return -ENOMEM;
+ /* This asserts reset, descriptor shall have polarity specified */
+ info->reset = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(info->reset))
+ return PTR_ERR(info->reset);
+ /* Notice: the "N" in M5MOLS_NRST implies active low */
+ gpiod_set_consumer_name(info->reset, "M5MOLS_NRST");
+
info->pdata = pdata;
info->set_power = pdata->set_power;
- gpio_flags = pdata->reset_polarity
- ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
- ret = devm_gpio_request_one(&client->dev, pdata->gpio_reset, gpio_flags,
- "M5MOLS_NRST");
- if (ret) {
- dev_err(&client->dev, "Failed to request gpio: %d\n", ret);
- return ret;
- }
-
ret = devm_regulator_bulk_get(&client->dev, ARRAY_SIZE(supplies),
supplies);
if (ret) {
--
2.34.1
