Some cx88 video cards may have transport stream status interrupts set
to 1 from cold start, causing errors like this:
cx88xx: cx88_print_irqbits: core:irq mpeg [0x100000] ts_err?*
cx8802: cx8802_mpeg_irq: mpeg:general errors: 0x00100000
According to CX2388x datasheet, the interrupt status register should be
cleared before enabling IRQs to stream video.
Fix it by clearing the Transport Stream Interrupt Status register.
Signed-off-by: Daniel González Cabanelas <dgcbueu@xxxxxxxxx>
---
Changes in v2:
- Added bits 8 and 12 to the clear operation. Now all documented
MO_TS_INTSTAT bits are cleared.
drivers/media/pci/cx88/cx88-mpeg.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/media/pci/cx88/cx88-mpeg.c b/drivers/media/pci/cx88/cx88-mpeg.c
index 680e1e3fe..2c1d5137a 100644
--- a/drivers/media/pci/cx88/cx88-mpeg.c
+++ b/drivers/media/pci/cx88/cx88-mpeg.c
@@ -162,6 +162,9 @@ int cx8802_start_dma(struct cx8802_dev *dev,
cx_write(MO_TS_GPCNTRL, GP_COUNT_CONTROL_RESET);
q->count = 0;
+ /* clear interrupt status register */
+ cx_write(MO_TS_INTSTAT, 0x1f1111);
+
/* enable irqs */
dprintk(1, "setting the interrupt mask\n");
cx_set(MO_PCI_INTMSK, core->pci_irqmask | PCI_INT_TSINT);
--
2.35.1
