Re: [PATCH v2 2/2] media: cec: seco: add newlines in debug messages

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 15/02/2022 19:13, ektor5 wrote:
> From: Ettore Chimenti <ek5.chimenti@xxxxxxxxx>
> 
> Newlines were missing in almost all regular and debug printk.

Thank you. I'll take this patch, so no need to repost this one in a v3.

Regards,

	Hans

> 
> Signed-off-by: Ettore Chimenti <ek5.chimenti@xxxxxxxxx>
> ---
>  drivers/media/cec/platform/seco/seco-cec.c | 54 +++++++++++-----------
>  1 file changed, 27 insertions(+), 27 deletions(-)
> 
> diff --git a/drivers/media/cec/platform/seco/seco-cec.c b/drivers/media/cec/platform/seco/seco-cec.c
> index ae138cc253fd..78856a55e637 100644
> --- a/drivers/media/cec/platform/seco/seco-cec.c
> +++ b/drivers/media/cec/platform/seco/seco-cec.c
> @@ -129,7 +129,7 @@ static int secocec_adap_enable(struct cec_adapter *adap, bool enable)
>  		if (status)
>  			goto err;
>  
> -		dev_dbg(dev, "Device enabled");
> +		dev_dbg(dev, "Device enabled\n");
>  	} else {
>  		/* Clear the status register */
>  		status = smb_rd16(SECOCEC_STATUS_REG_1, &val);
> @@ -141,7 +141,7 @@ static int secocec_adap_enable(struct cec_adapter *adap, bool enable)
>  				  ~SECOCEC_ENABLE_REG_1_CEC &
>  				  ~SECOCEC_ENABLE_REG_1_IR);
>  
> -		dev_dbg(dev, "Device disabled");
> +		dev_dbg(dev, "Device disabled\n");
>  	}
>  
>  	return 0;
> @@ -264,12 +264,12 @@ static void secocec_rx_done(struct cec_adapter *adap, u16 status_val)
>  
>  	if (status_val & SECOCEC_STATUS_RX_OVERFLOW_MASK) {
>  		/* NOTE: Untested, it also might not be necessary */
> -		dev_warn(dev, "Received more than 16 bytes. Discarding");
> +		dev_warn(dev, "Received more than 16 bytes. Discarding\n");
>  		flag_overflow = true;
>  	}
>  
>  	if (status_val & SECOCEC_STATUS_RX_ERROR_MASK) {
> -		dev_warn(dev, "Message received with errors. Discarding");
> +		dev_warn(dev, "Message received with errors. Discarding\n");
>  		status = -EIO;
>  		goto rxerr;
>  	}
> @@ -390,12 +390,12 @@ static int secocec_ir_probe(void *priv)
>  	if (status != 0)
>  		goto err;
>  
> -	dev_dbg(dev, "IR enabled");
> +	dev_dbg(dev, "IR enabled\n");
>  
>  	status = devm_rc_register_device(dev, cec->ir);
>  
>  	if (status) {
> -		dev_err(dev, "Failed to prepare input device");
> +		dev_err(dev, "Failed to prepare input device\n");
>  		cec->ir = NULL;
>  		goto err;
>  	}
> @@ -408,7 +408,7 @@ static int secocec_ir_probe(void *priv)
>  	smb_wr16(SECOCEC_ENABLE_REG_1,
>  		 val & ~SECOCEC_ENABLE_REG_1_IR);
>  
> -	dev_dbg(dev, "IR disabled");
> +	dev_dbg(dev, "IR disabled\n");
>  	return status;
>  }
>  
> @@ -431,13 +431,13 @@ static int secocec_ir_rx(struct secocec_data *priv)
>  
>  	rc_keydown(cec->ir, RC_PROTO_RC5, RC_SCANCODE_RC5(addr, key), toggle);
>  
> -	dev_dbg(dev, "IR key pressed: 0x%02x addr 0x%02x toggle 0x%02x", key,
> +	dev_dbg(dev, "IR key pressed: 0x%02x addr 0x%02x toggle 0x%02x\n", key,
>  		addr, toggle);
>  
>  	return 0;
>  
>  err:
> -	dev_err(dev, "IR Receive message failed (%d)", status);
> +	dev_err(dev, "IR Receive message failed (%d)\n", status);
>  	return -EIO;
>  }
>  #else
> @@ -497,7 +497,7 @@ static irqreturn_t secocec_irq_handler(int irq, void *priv)
>  	return IRQ_HANDLED;
>  
>  err:
> -	dev_err_once(dev, "IRQ: R/W SMBus operation failed (%d)", status);
> +	dev_err_once(dev, "IRQ: R/W SMBus operation failed %d\n", status);
>  
>  	/*  Reset status register */
>  	val = SECOCEC_STATUS_REG_1_CEC | SECOCEC_STATUS_REG_1_IR;
> @@ -553,16 +553,16 @@ static int secocec_acpi_probe(struct secocec_data *sdev)
>  
>  	gpio = devm_gpiod_get(dev, NULL, GPIOF_IN);
>  	if (IS_ERR(gpio)) {
> -		dev_err(dev, "Cannot request interrupt gpio");
> +		dev_err(dev, "Cannot request interrupt gpio\n");
>  		return PTR_ERR(gpio);
>  	}
>  
>  	irq = gpiod_to_irq(gpio);
>  	if (irq < 0) {
> -		dev_err(dev, "Cannot find valid irq");
> +		dev_err(dev, "Cannot find valid irq\n");
>  		return -ENODEV;
>  	}
> -	dev_dbg(dev, "irq-gpio is bound to IRQ %d", irq);
> +	dev_dbg(dev, "irq-gpio is bound to IRQ %d\n", irq);
>  
>  	sdev->irq = irq;
>  
> @@ -590,7 +590,7 @@ static int secocec_probe(struct platform_device *pdev)
>  
>  	/* Request SMBus regions */
>  	if (!request_muxed_region(BRA_SMB_BASE_ADDR, 7, "CEC00001")) {
> -		dev_err(dev, "Request memory region failed");
> +		dev_err(dev, "Request memory region failed\n");
>  		return -ENXIO;
>  	}
>  
> @@ -598,14 +598,14 @@ static int secocec_probe(struct platform_device *pdev)
>  	secocec->dev = dev;
>  
>  	if (!has_acpi_companion(dev)) {
> -		dev_dbg(dev, "Cannot find any ACPI companion");
> +		dev_dbg(dev, "Cannot find any ACPI companion\n");
>  		ret = -ENODEV;
>  		goto err;
>  	}
>  
>  	ret = secocec_acpi_probe(secocec);
>  	if (ret) {
> -		dev_err(dev, "Cannot assign gpio to IRQ");
> +		dev_err(dev, "Cannot assign gpio to IRQ\n");
>  		ret = -ENODEV;
>  		goto err;
>  	}
> @@ -613,11 +613,11 @@ static int secocec_probe(struct platform_device *pdev)
>  	/* Firmware version check */
>  	ret = smb_rd16(SECOCEC_VERSION, &val);
>  	if (ret) {
> -		dev_err(dev, "Cannot check fw version");
> +		dev_err(dev, "Cannot check fw version\n");
>  		goto err;
>  	}
>  	if (val < SECOCEC_LATEST_FW) {
> -		dev_err(dev, "CEC Firmware not supported (v.%04x). Use ver > v.%04x",
> +		dev_err(dev, "CEC Firmware not supported (v.%04x). Use ver > v.%04x\n",
>  			val, SECOCEC_LATEST_FW);
>  		ret = -EINVAL;
>  		goto err;
> @@ -631,7 +631,7 @@ static int secocec_probe(struct platform_device *pdev)
>  					dev_name(&pdev->dev), secocec);
>  
>  	if (ret) {
> -		dev_err(dev, "Cannot request IRQ %d", secocec->irq);
> +		dev_err(dev, "Cannot request IRQ %d\n", secocec->irq);
>  		ret = -EIO;
>  		goto err;
>  	}
> @@ -666,7 +666,7 @@ static int secocec_probe(struct platform_device *pdev)
>  
>  	platform_set_drvdata(pdev, secocec);
>  
> -	dev_dbg(dev, "Device registered");
> +	dev_dbg(dev, "Device registered\n");
>  
>  	return ret;
>  
> @@ -691,14 +691,14 @@ static int secocec_remove(struct platform_device *pdev)
>  
>  		smb_wr16(SECOCEC_ENABLE_REG_1, val & ~SECOCEC_ENABLE_REG_1_IR);
>  
> -		dev_dbg(&pdev->dev, "IR disabled");
> +		dev_dbg(&pdev->dev, "IR disabled\n");
>  	}
>  	cec_notifier_cec_adap_unregister(secocec->notifier, secocec->cec_adap);
>  	cec_unregister_adapter(secocec->cec_adap);
>  
>  	release_region(BRA_SMB_BASE_ADDR, 7);
>  
> -	dev_dbg(&pdev->dev, "CEC device removed");
> +	dev_dbg(&pdev->dev, "CEC device removed\n");
>  
>  	return 0;
>  }
> @@ -709,7 +709,7 @@ static int secocec_suspend(struct device *dev)
>  	int status;
>  	u16 val;
>  
> -	dev_dbg(dev, "Device going to suspend, disabling");
> +	dev_dbg(dev, "Device going to suspend, disabling\n");
>  
>  	/* Clear the status register */
>  	status = smb_rd16(SECOCEC_STATUS_REG_1, &val);
> @@ -733,7 +733,7 @@ static int secocec_suspend(struct device *dev)
>  	return 0;
>  
>  err:
> -	dev_err(dev, "Suspend failed (err: %d)", status);
> +	dev_err(dev, "Suspend failed: %d\n", status);
>  	return status;
>  }
>  
> @@ -742,7 +742,7 @@ static int secocec_resume(struct device *dev)
>  	int status;
>  	u16 val;
>  
> -	dev_dbg(dev, "Resuming device from suspend");
> +	dev_dbg(dev, "Resuming device from suspend\n");
>  
>  	/* Clear the status register */
>  	status = smb_rd16(SECOCEC_STATUS_REG_1, &val);
> @@ -762,12 +762,12 @@ static int secocec_resume(struct device *dev)
>  	if (status)
>  		goto err;
>  
> -	dev_dbg(dev, "Device resumed from suspend");
> +	dev_dbg(dev, "Device resumed from suspend\n");
>  
>  	return 0;
>  
>  err:
> -	dev_err(dev, "Resume failed (err: %d)", status);
> +	dev_err(dev, "Resume failed: %d\n", status);
>  	return status;
>  }
>  




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux