Please ignore this, only the cover letter was sent out. Sorry for the resend On Thu, Feb 10, 2022 at 12:03:07PM +0100, Jacopo Mondi wrote: > v1: > https://patchwork.linuxtv.org/project/linux-media/list/?series=7249 > > A branch for testing based on the most recent media-master is available at > https://git.sr.ht/~jmondi_/linux #jmondi/media-master/ov5640-v2 > > If anyone with a DVP setup could verify I have not broken their use case > I would very much appreciate that :) > > v1 -> v2: > - rework the modes definition to process the full pixel array > - rework get_selection to report the correct BOUND and DEFAULT targets > - implement init_cfg > - minor style changes as suggested by Laurent > - test with 1 data lane > > Thanks > j > > Jacopo Mondi (23): > media: ov5640: Add pixel rate to modes > media: ov5604: Re-arrange modes definition > media: ov5640: Add ov5640_is_csi2() function > media: ov5640: Associate bpp with formats > media: ov5640: Add LINK_FREQ control > media: ov5640: Update pixel_rate and link_freq > media: ov5640: Rework CSI-2 clock tree > media: ov5640: Rework timings programming > media: ov5640: Fix 720x480 in RGB888 mode > media: ov5640: Rework analog crop rectangles > media: ov5640: Re-sort per-mode register tables > media: ov5640: Remove ov5640_mode_init_data > media: ov5640: Add HBLANK control > media: ov5640: Add VBLANK control > media: ov5640: Fix durations to comply with FPS > media: ov5640: Implement init_cfg > media: ov5640: Implement get_selection > media: ov5640: Limit frame_interval to DVP mode only > media: ov5640: Register device properties > media: ov5640: Add RGB565_1X16 format > media: ov5640: Add RGB888/BGR888 formats > media: ov5640: Restrict sizes to mbus code > media: ov5640: Adjust format to bpp in s_fmt > > drivers/media/i2c/ov5640.c | 1143 ++++++++++++++++++++++++++---------- > 1 file changed, 830 insertions(+), 313 deletions(-) > > -- > 2.35.0 >
