Hello, On Fri, Jul 2, 2010 at 10:47 AM, Torsten Krah <tkrah@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote: > Am Freitag, 2. Juli 2010, um 02:59:57 schrieb Douglas Schilling Landgraf: >> humm, not really :-/ Are you sure em28xx/device get loaded when your >> device is plugged? >> >> A good test: >> >> - unplug your device >> - dmesg -c (clear the dmesg) >> - plug your device >> - check your dmesg, see if there is any error or message and please >> send to us the output. >> - lsmod could help also. >> - if it's ok, load the i2c modules > > The em28xx device gets not loaded because the usb id has changed and e1ba:2871 > is not associated to the em28xx-cards. > the usb id is wrong like i mentioned before - that may be the cause. > I provide you with dmesg later on. > > Maybe i need the patch Thorsten did too, to patch the em28xx-cards.c to get > the "new" wrong usb id regognized as a em28xx device so that i can reflash the > eeprom of the device. I might give this a try later this day. Please try it, should be the root cause. > @Thorsten: Did you reflash the device eeprom with your patched em28xx driver > or without the patch? > >> >> What's the message of rewirte_eeprom.pl? The same as Throsten? > > No, all ok.My distribution is lacking any i2c_smbus module - can't load this > one. Maybe Ubuntu does not build or 2.6.32 does not habe this one (looking > through the source i did not find it yet - maybe i missed that). Well,in my tests never needed to load i2c_smbus. Let me know if you need any additional help. Cheers Douglas -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
