Hi Jean-Michel,
Thank you for the patch.
On Thu, Feb 03, 2022 at 06:50:03PM +0100, Jean-Michel Hautbois wrote:
> Add both MIPI CSI-2 nodes in the core bcm2711 tree. Use the 3-cells
> interrupt declaration, corresponding clocks and default as disabled.
>
> Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@xxxxxxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/bcm2711-rpi.dtsi | 15 +++++++++++++++
> arch/arm/boot/dts/bcm2711.dtsi | 16 ++++++++++++++++
> 2 files changed, 31 insertions(+)
>
> diff --git a/arch/arm/boot/dts/bcm2711-rpi.dtsi b/arch/arm/boot/dts/bcm2711-rpi.dtsi
> index ca266c5d9f9b..97ee494891af 100644
> --- a/arch/arm/boot/dts/bcm2711-rpi.dtsi
> +++ b/arch/arm/boot/dts/bcm2711-rpi.dtsi
> @@ -1,6 +1,7 @@
> // SPDX-License-Identifier: GPL-2.0
> #include "bcm2835-rpi.dtsi"
>
> +#include <dt-bindings/power/raspberrypi-power.h>
> #include <dt-bindings/reset/raspberrypi,firmware-reset.h>
>
> / {
> @@ -18,6 +19,20 @@ aliases {
> };
> };
>
> +&csi0 {
> + clocks = <&clocks BCM2835_CLOCK_CAM0>,
> + <&firmware_clocks 4>;
> + clock-names = "lp", "vpu";
> + power-domains = <&power RPI_POWER_DOMAIN_UNICAM0>;
> +};
> +
> +&csi1 {
> + clocks = <&clocks BCM2835_CLOCK_CAM1>,
> + <&firmware_clocks 4>;
> + clock-names = "lp", "vpu";
> + power-domains = <&power RPI_POWER_DOMAIN_UNICAM1>;
> +};
> +
> &firmware {
> firmware_clocks: clocks {
> compatible = "raspberrypi,firmware-clocks";
> diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
> index dff18fc9a906..312a74601839 100644
> --- a/arch/arm/boot/dts/bcm2711.dtsi
> +++ b/arch/arm/boot/dts/bcm2711.dtsi
> @@ -293,6 +293,22 @@ hvs: hvs@7e400000 {
> interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> + csi0: csi@7e800000 {
> + compatible = "brcm,bcm2835-unicam";
> + reg = <0x7e800000 0x800>,
> + <0x7e802000 0x4>;
You should add reg-names here.
> + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
And I'd add
port {
};
too, as it's listed as required in the bindings.
The two comments apply to csi1 too.
With these fixed,
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> + };
> +
> + csi1: csi@7e801000 {
> + compatible = "brcm,bcm2835-unicam";
> + reg = <0x7e801000 0x800>,
> + <0x7e802004 0x4>;
> + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> pixelvalve3: pixelvalve@7ec12000 {
> compatible = "brcm,bcm2711-pixelvalve3";
> reg = <0x7ec12000 0x100>;
--
Regards,
Laurent Pinchart
