Add both MIPI CSI-2 nodes in the core bcm2711 tree. Use the 3-cells
interrupt declaration, corresponding clocks and default as disabled.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@xxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/bcm2711.dtsi | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index dff18fc9a906..9ad50d4c0c16 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -3,6 +3,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/soc/bcm2835-pm.h>
+#include <dt-bindings/power/raspberrypi-power.h>
/ {
compatible = "brcm,bcm2711";
@@ -293,6 +294,30 @@ hvs: hvs@7e400000 {
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
};
+ csi0: csi@7e800000 {
+ compatible = "brcm,bcm2835-unicam";
+ reg = <0x7e800000 0x800>,
+ <0x7e802000 0x4>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clocks BCM2835_CLOCK_CAM0>,
+ <&firmware_clocks 4>;
+ clock-names = "lp", "vpu";
+ power-domains = <&power RPI_POWER_DOMAIN_UNICAM0>;
+ status = "disabled";
+ };
+
+ csi1: csi@7e801000 {
+ compatible = "brcm,bcm2835-unicam";
+ reg = <0x7e801000 0x800>,
+ <0x7e802004 0x4>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clocks BCM2835_CLOCK_CAM1>,
+ <&firmware_clocks 4>;
+ clock-names = "lp", "vpu";
+ power-domains = <&power RPI_POWER_DOMAIN_UNICAM1>;
+ status = "disabled";
+ };
+
pixelvalve3: pixelvalve@7ec12000 {
compatible = "brcm,bcm2711-pixelvalve3";
reg = <0x7ec12000 0x100>;
--
2.32.0
