Hi Jean-Michel On Thu, 27 Jan 2022 at 10:09, Jean-Michel Hautbois <jeanmichel.hautbois@xxxxxxxxxxxxxxxx> wrote: > > MEDIA_BUS_FMT_UYVY8_2X8 isn't correct for CSI-2. Use > MEDIA_BUS_FMT_UYVY8_1X16 instead. 2X8 isn't correct for CSI-2, but it is correct for the parallel configuration that is also supported by this driver. Referencing the adv7180 datasheet[1] page 76, OF_SEL (bits [5:2] of register 0x03) are 0010b for 16bit, or 0011b for 8 bit. [2] in the driver sets these bits to 0011b, so it is in 2x8 mode. You may be able to get away with a simple check of if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2) fmt->code = MEDIA_BUS_FMT_UYVY8_1X16; else fmt->code = MEDIA_BUS_FMT_UYVY8_2X8; but I haven't examined all the potential options. Dave [1] https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7180.pdf [2] https://github.com/torvalds/linux/blob/master/drivers/media/i2c/adv7180.c#L1006 > Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@xxxxxxxxxxxxxxxx> > --- > drivers/media/i2c/adv7180.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c > index d9a99fcfacb1..cbededfb6b3f 100644 > --- a/drivers/media/i2c/adv7180.c > +++ b/drivers/media/i2c/adv7180.c > @@ -655,7 +655,7 @@ static int adv7180_enum_mbus_code(struct v4l2_subdev *sd, > if (code->index != 0) > return -EINVAL; > > - code->code = MEDIA_BUS_FMT_UYVY8_2X8; > + code->code = MEDIA_BUS_FMT_UYVY8_1X16; > > return 0; > } > @@ -665,7 +665,7 @@ static int adv7180_mbus_fmt(struct v4l2_subdev *sd, > { > struct adv7180_state *state = to_state(sd); > > - fmt->code = MEDIA_BUS_FMT_UYVY8_2X8; > + fmt->code = MEDIA_BUS_FMT_UYVY8_1X16; > fmt->colorspace = V4L2_COLORSPACE_SMPTE170M; > fmt->width = 720; > fmt->height = state->curr_norm & V4L2_STD_525_60 ? 480 : 576; > -- > 2.32.0 >
