Re: [PATCH v11 2/3] dts: arm64: mt8183: add Mediatek MDP3 nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Il 05/01/22 10:37, Moudy Ho ha scritto:
Add device nodes for Media Data Path 3 (MDP3) modules.

Signed-off-by: Moudy Ho <moudy.ho@xxxxxxxxxxxx>
---
  arch/arm64/boot/dts/mediatek/mt8183.dtsi | 108 ++++++++++++++++++++++-
  1 file changed, 107 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index ba4584faca5a..b872ef1ff6b3 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -1325,6 +1325,79 @@
  			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
  		};
+ mdp3_rdma0: mdp3_rdma0@14001000 {
+			compatible = "mediatek,mt8183-mdp3",
+				     "mediatek,mt8183-mdp3-rdma0";
+			mediatek,scp = <&scp>;
+			mediatek,mdp3-comps = "mediatek,mt8183-mdp3-dl1",
+					      "mediatek,mt8183-mdp3-dl2",
+					      "mediatek,mt8183-mdp3-path1",
+					      "mediatek,mt8183-mdp3-path2",
+					      "mediatek,mt8183-mdp3-imgi",
+					      "mediatek,mt8183-mdp3-exto";
+			reg = <0 0x14001000 0 0x1000>,
+			      <0 0x14000000 0 0x1000>,
+			      <0 0x14005000 0 0x1000>,
+			      <0 0x14006000 0 0x1000>,
+			      <0 0x15020000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>,
+						  <&gce SUBSYS_1400XXXX 0 0x1000>,
+						  <&gce SUBSYS_1400XXXX 0x5000 0x1000>,
+						  <&gce SUBSYS_1400XXXX 0x6000 0x1000>,
+						  <&gce SUBSYS_1502XXXX 0 0x1000>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_MDP_RDMA0>,
+				 <&mmsys CLK_MM_MDP_RSZ1>,
+				 <&mmsys CLK_MM_MDP_DL_TXCK>,
+				 <&mmsys CLK_MM_MDP_DL_RX>,
+				 <&mmsys CLK_MM_IPU_DL_TXCK>,
+				 <&mmsys CLK_MM_IPU_DL_RX>;
+			iommus = <&iommu M4U_PORT_MDP_RDMA0>;
+			mediatek,mmsys = <&mmsys>;
+			mediatek,mm-mutex = <&mutex>;
+			mediatek,mailbox-gce = <&gce>;
+			mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST 0>,
+				 <&gce 21 CMDQ_THR_PRIO_LOWEST>,
+				 <&gce 22 CMDQ_THR_PRIO_LOWEST>,
+				 <&gce 23 CMDQ_THR_PRIO_LOWEST>;

Hello Moudy,
the mboxes for gce 21, 22, 23 are missing the third cell. Please fix.

Regards,
Angelo

+			gce-subsys = <&gce 0x14000000 SUBSYS_1400XXXX>,
+				     <&gce 0x14010000 SUBSYS_1401XXXX>,
+				     <&gce 0x14020000 SUBSYS_1402XXXX>,
+				     <&gce 0x15020000 SUBSYS_1502XXXX>;
+		};
+




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux