[PATCH] dt-bindings: Fix array schemas encoded as matrices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The YAML DT encoding has leaked into some array properties. Properties
which are defined as an array should have a schema that's just an array.
That means there should only be a single level of 'minItems',
'maxItems', and/or 'items'.

Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
---
 .../bindings/media/nxp,imx7-mipi-csi2.yaml    | 12 ++--
 .../bindings/media/nxp,imx8mq-mipi-csi2.yaml  | 12 ++--
 .../bindings/net/can/bosch,m_can.yaml         | 52 ++++++++--------
 .../bindings/net/ethernet-controller.yaml     | 59 +++++++++----------
 4 files changed, 62 insertions(+), 73 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
index 1ef849dc74d7..e2e6e9aa0fe6 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
@@ -81,14 +81,12 @@ properties:
               data-lanes:
                 description:
                   Note that 'fsl,imx7-mipi-csi2' only supports up to 2 data lines.
+                minItems: 1
                 items:
-                  minItems: 1
-                  maxItems: 4
-                  items:
-                    - const: 1
-                    - const: 2
-                    - const: 3
-                    - const: 4
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
 
             required:
               - data-lanes
diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
index d13c9233a7c8..2a14e3b0e004 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
@@ -87,14 +87,12 @@ properties:
 
             properties:
               data-lanes:
+                minItems: 1
                 items:
-                  minItems: 1
-                  maxItems: 4
-                  items:
-                    - const: 1
-                    - const: 2
-                    - const: 3
-                    - const: 4
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
 
             required:
               - data-lanes
diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
index fb547e26c676..401ab7cdb379 100644
--- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
+++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
@@ -76,33 +76,31 @@ properties:
       M_CAN user manual for details.
     $ref: /schemas/types.yaml#/definitions/int32-array
     items:
-      items:
-        - description: The 'offset' is an address offset of the Message RAM where
-            the following elements start from. This is usually set to 0x0 if
-            you're using a private Message RAM.
-          default: 0
-        - description: 11-bit Filter 0-128 elements / 0-128 words
-          minimum: 0
-          maximum: 128
-        - description: 29-bit Filter 0-64 elements / 0-128 words
-          minimum: 0
-          maximum: 64
-        - description: Rx FIFO 0 0-64 elements / 0-1152 words
-          minimum: 0
-          maximum: 64
-        - description: Rx FIFO 1 0-64 elements / 0-1152 words
-          minimum: 0
-          maximum: 64
-        - description: Rx Buffers 0-64 elements / 0-1152 words
-          minimum: 0
-          maximum: 64
-        - description: Tx Event FIFO 0-32 elements / 0-64 words
-          minimum: 0
-          maximum: 32
-        - description: Tx Buffers 0-32 elements / 0-576 words
-          minimum: 0
-          maximum: 32
-    maxItems: 1
+      - description: The 'offset' is an address offset of the Message RAM where
+          the following elements start from. This is usually set to 0x0 if
+          you're using a private Message RAM.
+        default: 0
+      - description: 11-bit Filter 0-128 elements / 0-128 words
+        minimum: 0
+        maximum: 128
+      - description: 29-bit Filter 0-64 elements / 0-128 words
+        minimum: 0
+        maximum: 64
+      - description: Rx FIFO 0 0-64 elements / 0-1152 words
+        minimum: 0
+        maximum: 64
+      - description: Rx FIFO 1 0-64 elements / 0-1152 words
+        minimum: 0
+        maximum: 64
+      - description: Rx Buffers 0-64 elements / 0-1152 words
+        minimum: 0
+        maximum: 64
+      - description: Tx Event FIFO 0-32 elements / 0-64 words
+        minimum: 0
+        maximum: 32
+      - description: Tx Buffers 0-32 elements / 0-576 words
+        minimum: 0
+        maximum: 32
 
   power-domains:
     description:
diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index 47b5f728701d..34c5463abcec 100644
--- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -17,9 +17,8 @@ properties:
     description:
       Specifies the MAC address that was assigned to the network device.
     $ref: /schemas/types.yaml#/definitions/uint8-array
-    items:
-      - minItems: 6
-        maxItems: 6
+    minItems: 6
+    maxItems: 6
 
   mac-address:
     description:
@@ -28,9 +27,8 @@ properties:
       to the device by the boot program is different from the
       local-mac-address property.
     $ref: /schemas/types.yaml#/definitions/uint8-array
-    items:
-      - minItems: 6
-        maxItems: 6
+    minItems: 6
+    maxItems: 6
 
   max-frame-size:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -164,33 +162,30 @@ properties:
           type: array
         then:
           deprecated: true
-          minItems: 1
-          maxItems: 1
           items:
-            items:
-              - minimum: 0
-                maximum: 31
-                description:
-                  Emulated PHY ID, choose any but unique to the all
-                  specified fixed-links
-
-              - enum: [0, 1]
-                description:
-                  Duplex configuration. 0 for half duplex or 1 for
-                  full duplex
-
-              - enum: [10, 100, 1000, 2500, 10000]
-                description:
-                  Link speed in Mbits/sec.
-
-              - enum: [0, 1]
-                description:
-                  Pause configuration. 0 for no pause, 1 for pause
-
-              - enum: [0, 1]
-                description:
-                  Asymmetric pause configuration. 0 for no asymmetric
-                  pause, 1 for asymmetric pause
+            - minimum: 0
+              maximum: 31
+              description:
+                Emulated PHY ID, choose any but unique to the all
+                specified fixed-links
+
+            - enum: [0, 1]
+              description:
+                Duplex configuration. 0 for half duplex or 1 for
+                full duplex
+
+            - enum: [10, 100, 1000, 2500, 10000]
+              description:
+                Link speed in Mbits/sec.
+
+            - enum: [0, 1]
+              description:
+                Pause configuration. 0 for no pause, 1 for pause
+
+            - enum: [0, 1]
+              description:
+                Asymmetric pause configuration. 0 for no asymmetric
+                pause, 1 for asymmetric pause
 
 
       - if:
-- 
2.32.0




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux