Thu, Jan 13, 2022 at 04:55:52PM +0000, Sean Young wrote:
So I had to dig around for a while, but I have the same device here.
After some experimenting I've written a patch. Please could test it out
for me, a `Tested-by:` would be appreciated (if it works of course!).
It is significantly better for the bundled remote control unit (using
the NEC protocol). But it can still lose events. I tested by holding
down the VOL+ and VOL- keys. Also the GNOME Desktop was listening to
those events, so I got some additional visual feedback.
Here is a trace from ir-keytable -t, using the NEC protocol:
Testing events. Please, press CTRL-C to abort.
261.125938: lirc protocol(nec): scancode = 0x1e
261.125959: event type EV_MSC(0x04): scancode = 0x1e
261.125959: event type EV_KEY(0x01) key_down: KEY_VOLUMEUP(0x0073)
261.125959: event type EV_SYN(0x00).
261.189926: lirc protocol(nec): scancode = 0x1e repeat
261.189939: event type EV_MSC(0x04): scancode = 0x1e
261.189939: event type EV_SYN(0x00).
261.309891: lirc protocol(nec): scancode = 0x1e repeat
261.309905: event type EV_MSC(0x04): scancode = 0x1e
261.309905: event type EV_SYN(0x00).
261.429960: lirc protocol(nec): scancode = 0x1e repeat
261.429973: event type EV_MSC(0x04): scancode = 0x1e
261.429973: event type EV_SYN(0x00).
261.553908: lirc protocol(nec): scancode = 0x1e repeat
261.553923: event type EV_MSC(0x04): scancode = 0x1e
261.553923: event type EV_SYN(0x00).
261.617911: lirc protocol(nec): scancode = 0x1e repeat
261.617924: event type EV_MSC(0x04): scancode = 0x1e
261.617924: event type EV_SYN(0x00).
261.628041: event type EV_KEY(0x01) key_down: KEY_VOLUMEUP(0x0073)
261.628041: event type EV_SYN(0x00).
261.737970: lirc protocol(nec): scancode = 0x1e repeat
261.628041: event type EV_MSC(0x04): scancode = 0x1e
261.628041: event type EV_SYN(0x00).
261.760048: event type EV_KEY(0x01) key_down: KEY_VOLUMEUP(0x0073)
261.760048: event type EV_SYN(0x00).
261.857958: lirc protocol(nec): scancode = 0x1e repeat
261.760048: event type EV_MSC(0x04): scancode = 0x1e
261.760048: event type EV_SYN(0x00).
261.892056: event type EV_KEY(0x01) key_down: KEY_VOLUMEUP(0x0073)
261.892056: event type EV_SYN(0x00).
So far, so good. The initial delay between the key_down events is 500ms.
But, keep reading:
262.024055: event type EV_KEY(0x01) key_down: KEY_VOLUMEUP(0x0073)
262.024055: event type EV_SYN(0x00).
262.045960: lirc protocol(nec): scancode = 0x1e repeat
262.024055: event type EV_MSC(0x04): scancode = 0x1e
262.024055: event type EV_SYN(0x00).
262.156052: event type EV_KEY(0x01) key_down: KEY_VOLUMEUP(0x0073)
262.156052: event type EV_SYN(0x00).
262.156052: event type EV_KEY(0x01) key_up: KEY_VOLUMEUP(0x0073)
262.156052: event type EV_SYN(0x00).
264.074505: lirc protocol(nec): scancode = 0x1e repeat
264.074524: event type EV_MSC(0x04): scancode = 0x1e
264.074524: event type EV_SYN(0x00).
264.137961: lirc protocol(nec): scancode = 0xa
264.137979: event type EV_MSC(0x04): scancode = 0x0a
264.137979: event type EV_KEY(0x01) key_down: KEY_VOLUMEDOWN(0x0072)
264.137979: event type EV_SYN(0x00).
264.324062: event type EV_KEY(0x01) key_up: KEY_VOLUMEDOWN(0x0072)
264.324062: event type EV_SYN(0x00).
264.325944: lirc protocol(nec): scancode = 0xa repeat
264.325960: event type EV_MSC(0x04): scancode = 0x0a
264.325960: event type EV_SYN(0x00).
264.445972: lirc protocol(nec): scancode = 0xa repeat
264.445988: event type EV_MSC(0x04): scancode = 0x0a
264.445988: event type EV_SYN(0x00).
264.565937: lirc protocol(nec): scancode = 0xa repeat
264.565952: event type EV_MSC(0x04): scancode = 0x0a
[snip]
266.585974: lirc protocol(nec): scancode = 0xa repeat
266.585989: event type EV_MSC(0x04): scancode = 0x0a
266.585989: event type EV_SYN(0x00).
267.270556: lirc protocol(nec): scancode = 0xa repeat
267.270571: event type EV_MSC(0x04): scancode = 0x0a
267.270571: event type EV_SYN(0x00).
267.389958: lirc protocol(nec): scancode = 0xa
267.389976: event type EV_MSC(0x04): scancode = 0x0a
267.389976: event type EV_KEY(0x01) key_down: KEY_VOLUMEDOWN(0x0072)
267.389976: event type EV_SYN(0x00).
267.509941: lirc protocol(nec): scancode = 0xa repeat
267.509957: event type EV_MSC(0x04): scancode = 0x0a
267.509957: event type EV_SYN(0x00).
267.629971: lirc protocol(nec): scancode = 0xa repeat
267.629986: event type EV_MSC(0x04): scancode = 0x0a
267.629986: event type EV_SYN(0x00).
267.749948: lirc protocol(nec): scancode = 0xa repeat
267.749963: event type EV_MSC(0x04): scancode = 0x0a
267.749963: event type EV_SYN(0x00).
267.873963: lirc protocol(nec): scancode = 0xa repeat
267.873978: event type EV_MSC(0x04): scancode = 0x0a
267.873978: event type EV_SYN(0x00).
267.900054: event type EV_KEY(0x01) key_down: KEY_VOLUMEDOWN(0x0072)
267.900054: event type EV_SYN(0x00).
267.937934: lirc protocol(nec): scancode = 0xa repeat
267.900054: event type EV_MSC(0x04): scancode = 0x0a
267.900054: event type EV_SYN(0x00).
268.032044: event type EV_KEY(0x01) key_down: KEY_VOLUMEDOWN(0x0072)
268.032044: event type EV_SYN(0x00).
Why was there a key_up event at 264.324062 even though I continued to
hold down that button? Maybe shortly before another key_down was finally
generated, I had let the button go and pressed it again.
All in all, I long-pressed VOL+, VOL-, VOL+, VOL-, and only for the
second press (VOL-) I failed to get proper repeat events. So, it almost
works. For comparison, I used the stock kernel module, which never
generated repeat events for the NEC protocol.
Then, I loaded the hauppauge.toml and tested with RC5. It was fairly OK,
except for an anomaly: When I pressed Vol- or Vol+ after just having
long-pressed the other key, I got one more event for the previous key!
Here is a trace of that:
1471.642128: event type EV_MSC(0x04): scancode = 0x1e10
1471.642128: event type EV_SYN(0x00).
1471.676071: event type EV_KEY(0x01) key_down: KEY_VOLUMEUP(0x0073)
1471.676071: event type EV_SYN(0x00).
1471.808059: event type EV_KEY(0x01) key_down: KEY_VOLUMEUP(0x0073)
1471.808059: event type EV_SYN(0x00).
1471.808059: event type EV_KEY(0x01) key_up: KEY_VOLUMEUP(0x0073)
1471.808059: event type EV_SYN(0x00).
1472.266096: lirc protocol(rc5): scancode = 0x1e10 toggle=1
1472.266113: event type EV_MSC(0x04): scancode = 0x1e10
1472.266113: event type EV_KEY(0x01) key_down: KEY_VOLUMEUP(0x0073)
1472.266113: event type EV_SYN(0x00).
1472.386062: lirc protocol(rc5): scancode = 0x1e11
1472.386079: event type EV_KEY(0x01) key_up: KEY_VOLUMEUP(0x0073)
1472.386079: event type EV_MSC(0x04): scancode = 0x1e11
1472.386079: event type EV_KEY(0x01) key_down: KEY_VOLUMEDOWN(0x0072)
1472.386079: event type EV_SYN(0x00).
1472.450104: lirc protocol(rc5): scancode = 0x1e11
1472.450118: event type EV_MSC(0x04): scancode = 0x1e11
1472.450118: event type EV_SYN(0x00).
1472.570090: lirc protocol(rc5): scancode = 0x1e11
1472.570105: event type EV_MSC(0x04): scancode = 0x1e11
1472.570105: event type EV_SYN(0x00).
1472.760061: event type EV_KEY(0x01) key_up: KEY_VOLUMEDOWN(0x0072)
1472.760061: event type EV_SYN(0x00).
The events between 1472.266096 and 1472.386079 are fake. I only pressed
and released Vol+ once. Once I started to press Vol- I got fake key_down
and key_up for KEY_VOLUMEUP instead of getting the initial message for
KEY_VOLUMEDOWN.
I tried this also with short presses, pressing Vol- and Vol+
alternatively. Almost all of the time, the GNOME volume control widget
reacted by getting exactly the wrong event (from the previous key
press).
From f860a05c35a7b0e7b331e61e1b61674c2a9279f0 Mon Sep 17 00:00:00 2001
From: Sean Young <sean@xxxxxxxx>
Date: Thu, 13 Jan 2022 16:33:13 +0000
Subject: [PATCH] media: rtl28xxu: improve IR receiver
In my opinion, this patch is a significant improvement for decoding the
NEC protocol, as well as for the RC5 protocol, because for that one it
no longer sends key_up events before each repeated key_down event for a
held-down button.
But, for the RC5 decoder, there appears to be a serious regression that
instead of sending the event for the last received message, it will
repeat an event for the previously pressed button.
Best regards,
Marko
