Implement the get_frame_desc subdev pad operation.
Implement the get_frame_desc pad operation to allow retrieving the
stream configuration of the adv748x csi2 subdevice.
Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
---
drivers/media/i2c/adv748x/adv748x-csi2.c | 93 ++++++++++++++++++++++++
1 file changed, 93 insertions(+)
diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
index 549c3cd96006..9824ebe44eb1 100644
--- a/drivers/media/i2c/adv748x/adv748x-csi2.c
+++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
@@ -14,6 +14,50 @@
#include "adv748x.h"
+/* Describes a format bit depth and CSI-2 defined Data Type. */
+struct adv748x_csi2_format_info {
+ u8 dt;
+ u8 bpp;
+};
+
+static int adv748x_csi2_get_format_info(struct adv748x_csi2 *tx,
+ u32 mbus_code,
+ struct adv748x_csi2_format_info *fmt)
+{
+ switch (mbus_code) {
+ case MEDIA_BUS_FMT_YUYV8_1X16:
+ case MEDIA_BUS_FMT_YUYV8_2X8:
+ fmt->dt = 0x1e;
+ fmt->bpp = 16;
+ break;
+ case MEDIA_BUS_FMT_YUYV10_2X10:
+ case MEDIA_BUS_FMT_YUYV10_1X20:
+ fmt->dt = 0x1f;
+ fmt->bpp = 20;
+ break;
+ case MEDIA_BUS_FMT_RGB565_1X16:
+ case MEDIA_BUS_FMT_RGB565_2X8_LE:
+ case MEDIA_BUS_FMT_RGB565_2X8_BE:
+ fmt->dt = 0x22;
+ fmt->bpp = 16;
+ break;
+ case MEDIA_BUS_FMT_RGB666_1X18:
+ fmt->dt = 0x23;
+ fmt->bpp = 18;
+ break;
+ case MEDIA_BUS_FMT_RGB888_1X24:
+ fmt->dt = 0x24;
+ fmt->bpp = 24;
+ break;
+ default:
+ dev_err(tx->state->dev,
+ "Unsupported media bus code: %u\n", mbus_code);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
int adv748x_csi2_set_virtual_channel(struct adv748x_csi2 *tx, unsigned int vc)
{
return tx_write(tx, ADV748X_CSI_VC_REF, vc << ADV748X_CSI_VC_REF_SHIFT);
@@ -248,11 +292,60 @@ static int adv748x_csi2_get_mbus_config(struct v4l2_subdev *sd, unsigned int pad
return 0;
}
+static int adv748x_csi2_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad,
+ struct v4l2_mbus_frame_desc *fd)
+{
+ struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd);
+ struct adv748x_csi2_format_info info = {};
+ struct v4l2_mbus_frame_desc_entry *entry;
+ struct v4l2_subdev_route *route;
+ struct v4l2_subdev_state *state;
+ struct v4l2_mbus_framefmt *fmt;
+ int ret;
+
+ if (pad != ADV748X_CSI2_SOURCE)
+ return -EINVAL;
+
+ state = v4l2_subdev_lock_active_state(sd);
+
+ /* A single route is available. */
+ route = &state->routing.routes[0];
+ fmt = v4l2_state_get_stream_format(state, pad, route->source_stream);
+ if (!fmt) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ ret = adv748x_csi2_get_format_info(tx, fmt->code, &info);
+ if (ret)
+ goto out;
+
+ memset(fd, 0, sizeof(*fd));
+
+ /* A single stream is available. */
+ fd->num_entries = 1;
+ fd->type = V4L2_MBUS_FRAME_DESC_TYPE_CSI2;
+
+ entry = &fd->entry[0];
+ entry->stream = 0;
+ entry->flags = V4L2_MBUS_FRAME_DESC_FL_LEN_MAX;
+ entry->length = fmt->width * fmt->height * info.bpp / 8;
+ entry->pixelcode = fmt->code;
+ entry->bus.csi2.vc = route->source_stream;
+ entry->bus.csi2.dt = info.dt;
+
+out:
+ v4l2_subdev_unlock_state(state);
+
+ return ret;
+}
+
static const struct v4l2_subdev_pad_ops adv748x_csi2_pad_ops = {
.init_cfg = adv748x_csi2_init_cfg,
.get_fmt = v4l2_subdev_get_fmt,
.set_fmt = adv748x_csi2_set_format,
.get_mbus_config = adv748x_csi2_get_mbus_config,
+ .get_frame_desc = adv748x_csi2_get_frame_desc,
};
/* -----------------------------------------------------------------------------
--
2.33.1
