Re: [PATCH v4 1/6] staging: media: wave5: Add vpuapi layer

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 04.12.21 15:43, Daniel Palmer wrote:
Hi Dafna,

Sorry for the piecemeal emails..

On Thu, 2 Dec 2021 at 02:56, Dafna Hirschfeld
<dafna.hirschfeld@xxxxxxxxxxxxx> wrote:
diff --git a/drivers/staging/media/wave5/wave5-hw.c b/drivers/staging/media/wave5/wave5-hw.c

... snip ...

+static int wave5_wait_bus_busy(struct vpu_device *vpu_dev, int timeout, unsigned int addr)
+{
+       u32 gdi_status_check_value = 0x3f;
+       u32 data;
+
+       if (vpu_dev->product_code == WAVE521C_CODE ||
+           vpu_dev->product_code == WAVE521_CODE ||
+        vpu_dev->product_code == WAVE521E1_CODE)
+               gdi_status_check_value = 0x00ff1f3f;
+
+       return read_poll_timeout(wave5_vdi_read_register, data, data == gdi_status_check_value,
+                                0, timeout * 1000, false, vpu_dev, addr);
+}
+

This looks like it should be s/wave5_vdi_read_register/wave5_read_register/.
For wave511 addr passed in here is 0x8e14 so well outside of what is
directly accessible.

Hi, I didn't understand this explanation. I see that
wave5_read_register eventually calls 'wave5_vdi_read_register'.
Could you please explain in more detail why you think
calling wave5_vdi_read_register is wrong?

Actually the name 'wave5_read_register' is a bad name for that
func since it eventually return the value of the W5_VPU_FIO_DATA
register upon success and not the address sent to it.



Also it seems that this can either return 0 or -ETIMEDOUT...

... snip ...

+int wave5_vpu_reset(struct device *dev, enum sw_reset_mode reset_mode)
+{
+       u32 val = 0;
+       int ret = 0;
+       struct vpu_device *vpu_dev = dev_get_drvdata(dev);
+       struct vpu_attr *p_attr = &vpu_dev->attr;
+       // VPU doesn't send response. force to set BUSY flag to 0.
+       vpu_write_reg(vpu_dev, W5_VPU_BUSY_STATUS, 0);
+
+       if (reset_mode == SW_RESET_SAFETY) {
+               ret = wave5_vpu_sleep_wake(dev, true, NULL, 0);
+               if (ret)
+                       return ret;
+       }
+
+       val = vpu_read_reg(vpu_dev, W5_VPU_RET_VPU_CONFIG0);
+       if ((val >> 16) & 0x1)
+               p_attr->support_backbone = true;
+       if ((val >> 22) & 0x1)
+               p_attr->support_vcore_backbone = true;
+       if ((val >> 28) & 0x1)
+               p_attr->support_vcpu_backbone = true;
+
+       val = vpu_read_reg(vpu_dev, W5_VPU_RET_VPU_CONFIG1);
+       if ((val >> 26) & 0x1)
+               p_attr->support_dual_core = true;
+
+       // waiting for completion of bus transaction
+       if (p_attr->support_backbone) {
+               if (p_attr->support_dual_core) {
+                       // check CORE0
+                       wave5_write_register(vpu_dev, W5_BACKBONE_BUS_CTRL_VCORE0, 0x7);
+
+                       ret = wave5_wait_bus_busy(vpu_dev, VPU_BUSY_CHECK_TIMEOUT,
+                                                 W5_BACKBONE_BUS_STATUS_VCORE0);
+                       if (ret) {
+                               wave5_write_register(vpu_dev, W5_BACKBONE_BUS_CTRL_VCORE0, 0x00);
+                               return ret;
+                       }
+
+                       // check CORE1
+                       wave5_write_register(vpu_dev, W5_BACKBONE_BUS_CTRL_VCORE1, 0x7);
+
+                       ret = wave5_wait_bus_busy(vpu_dev, VPU_BUSY_CHECK_TIMEOUT,
+                                                 W5_BACKBONE_BUS_STATUS_VCORE1);
+                       if (ret) {
+                               wave5_write_register(vpu_dev, W5_BACKBONE_BUS_CTRL_VCORE1, 0x00);
+                               return ret;
+                       }
+
+               } else if (p_attr->support_vcore_backbone) {
+                       if (p_attr->support_vcpu_backbone) {
+                               // step1 : disable request
+                               wave5_write_register(vpu_dev, W5_BACKBONE_BUS_CTRL_VCPU,
+                                                    0xFF);
+
+                               // step2 : waiting for completion of bus transaction
+                               ret = wave5_wait_vcpu_bus_busy(vpu_dev, VPU_BUSY_CHECK_TIMEOUT,
+                                                              W5_BACKBONE_BUS_STATUS_VCPU);
+                               if (ret) {
+                                       wave5_write_register(vpu_dev,
+                                                            W5_BACKBONE_BUS_CTRL_VCPU, 0x00);
+                                       return ret;
+                               }
+                       }
+                       // step1 : disable request
+                       wave5_write_register(vpu_dev, W5_BACKBONE_BUS_CTRL_VCORE0, 0x7);
+
+                       // step2 : waiting for completion of bus transaction
+                       if (wave5_wait_bus_busy(vpu_dev, VPU_BUSY_CHECK_TIMEOUT,
+                                               W5_BACKBONE_BUS_STATUS_VCORE0) == -1) {
+                               wave5_write_register(vpu_dev, W5_BACKBONE_BUS_CTRL_VCORE0, 0x00);
+                               return -EBUSY;
+                       }

but this is looking for -1 on failure.

right, thanks for finding this, I see that wave5_read_register return -1 on failure so maybe
this is the source of the confusion.

Thanks,
Dafna


+               } else {
+                       // step1 : disable request
+                       wave5_write_register(vpu_dev, W5_COMBINED_BACKBONE_BUS_CTRL, 0x7);
+
+                       // step2 : waiting for completion of bus transaction
+                       if (wave5_wait_bus_busy(vpu_dev, VPU_BUSY_CHECK_TIMEOUT,
+                                               W5_COMBINED_BACKBONE_BUS_STATUS) == -1) {
+                               wave5_write_register(vpu_dev, W5_COMBINED_BACKBONE_BUS_CTRL, 0x00);
+                               return -EBUSY;
+                       }
+               }

Here too.

Cheers,

Daniel




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux