Few comments and questions. On Wed, Dec 1, 2021 at 7:46 PM Yunfei Dong <yunfei.dong@xxxxxxxxxxxx> wrote: > > There are more than two hardwares for decoder: LAT0, LAT1 and CORE. In order to > manage these hardwares, register each hardware as independent platform device > for the larbs are different. basic question: what is "larbs"? > > Each hardware module controls its own information which includes interrupt/power/ > clocks/registers. > > Calling of_platform_populate in parent device, and use subdev_bitmap to record > whether the hardwares are registered done. nit: s/registered done/registered/ ? > > Signed-off-by: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx> > --- > drivers/media/platform/mtk-vcodec/Makefile | 5 +- > .../platform/mtk-vcodec/mtk_vcodec_dec_drv.c | 111 +++++++---- > .../platform/mtk-vcodec/mtk_vcodec_dec_hw.c | 172 ++++++++++++++++++ > .../platform/mtk-vcodec/mtk_vcodec_dec_hw.h | 51 ++++++ > .../mtk-vcodec/mtk_vcodec_dec_stateful.c | 1 + > .../mtk-vcodec/mtk_vcodec_dec_stateless.c | 2 + > .../platform/mtk-vcodec/mtk_vcodec_drv.h | 19 ++ > 7 files changed, 329 insertions(+), 32 deletions(-) > create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.c > create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.h > > diff --git a/drivers/media/platform/mtk-vcodec/Makefile b/drivers/media/platform/mtk-vcodec/Makefile > index ca8e9e7a9c4e..c61bfb179bcc 100644 > --- a/drivers/media/platform/mtk-vcodec/Makefile > +++ b/drivers/media/platform/mtk-vcodec/Makefile > @@ -2,7 +2,8 @@ > > obj-$(CONFIG_VIDEO_MEDIATEK_VCODEC) += mtk-vcodec-dec.o \ > mtk-vcodec-enc.o \ > - mtk-vcodec-common.o > + mtk-vcodec-common.o \ > + mtk-vcodec-dec-hw.o > > mtk-vcodec-dec-y := vdec/vdec_h264_if.o \ > vdec/vdec_vp8_if.o \ > @@ -16,6 +17,8 @@ mtk-vcodec-dec-y := vdec/vdec_h264_if.o \ > mtk_vcodec_dec_stateless.o \ > mtk_vcodec_dec_pm.o \ > > +mtk-vcodec-dec-hw-y := mtk_vcodec_dec_hw.o > + > mtk-vcodec-enc-y := venc/venc_vp8_if.o \ > venc/venc_h264_if.o \ > mtk_vcodec_enc.o \ > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c > index b7a51e96d4ba..95fbe9be3f6d 100644 > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c > @@ -18,19 +18,40 @@ > > #include "mtk_vcodec_drv.h" > #include "mtk_vcodec_dec.h" > +#include "mtk_vcodec_dec_hw.h" > #include "mtk_vcodec_dec_pm.h" > #include "mtk_vcodec_intr.h" > #include "mtk_vcodec_util.h" > #include "mtk_vcodec_fw.h" > > -#define VDEC_HW_ACTIVE 0x10 > -#define VDEC_IRQ_CFG 0x11 > -#define VDEC_IRQ_CLR 0x10 > -#define VDEC_IRQ_CFG_REG 0xa4 > - > module_param(mtk_v4l2_dbg_level, int, 0644); > module_param(mtk_vcodec_dbg, bool, 0644); > > +static int mtk_vcodec_subdev_device_check(struct mtk_vcodec_dev *vdec_dev) > +{ > + struct platform_device *pdev = vdec_dev->plat_dev; > + struct device_node *subdev_node; > + enum mtk_vdec_hw_id hw_idx; > + const struct of_device_id *of_id; > + int i; > + > + for (i = 0; i < ARRAY_SIZE(mtk_vdec_hw_match); i++) { > + of_id = &mtk_vdec_hw_match[i]; > + subdev_node = of_find_compatible_node(NULL, NULL, > + of_id->compatible); > + if (!subdev_node) > + continue; > + > + hw_idx = (enum mtk_vdec_hw_id)(uintptr_t)of_id->data; > + if (!test_bit(hw_idx, vdec_dev->subdev_bitmap)) { > + dev_err(&pdev->dev, "Vdec %d is not ready", hw_idx); > + return -EAGAIN; > + } > + } > + > + return 0; > +} > + > static irqreturn_t mtk_vcodec_dec_irq_handler(int irq, void *priv) > { > struct mtk_vcodec_dev *dev = priv; > @@ -95,6 +116,42 @@ static int mtk_vcodec_get_reg_bases(struct mtk_vcodec_dev *dev) > return 0; > } > > +static int mtk_vcodec_init_dec_resources(struct mtk_vcodec_dev *dev) > +{ > + struct platform_device *pdev = dev->plat_dev; > + int ret; > + > + ret = mtk_vcodec_get_reg_bases(dev); > + if (ret) > + return ret; > + > + if (dev->vdec_pdata->is_subdev_supported) > + return 0; > + > + dev->dec_irq = platform_get_irq(pdev, 0); > + if (dev->dec_irq < 0) { > + dev_err(&pdev->dev, "failed to get irq number"); > + return dev->dec_irq; > + } > + > + irq_set_status_flags(dev->dec_irq, IRQ_NOAUTOEN); > + ret = devm_request_irq(&pdev->dev, dev->dec_irq, > + mtk_vcodec_dec_irq_handler, 0, pdev->name, dev); > + if (ret) { > + dev_err(&pdev->dev, "failed to install dev->dec_irq %d (%d)", > + dev->dec_irq, ret); > + return ret; > + } > + > + ret = mtk_vcodec_init_dec_pm(pdev, &dev->pm); > + if (ret < 0) { > + dev_err(&pdev->dev, "failed to get mt vcodec clock source"); > + return ret; > + } > + > + return 0; > +} > + > static int fops_vcodec_open(struct file *file) > { > struct mtk_vcodec_dev *dev = video_drvdata(file); > @@ -116,6 +173,12 @@ static int fops_vcodec_open(struct file *file) > init_waitqueue_head(&ctx->queue); > mutex_init(&ctx->lock); > > + ret = mtk_vcodec_subdev_device_check(dev); > + if (ret) { > + mtk_v4l2_err("Failed to check vdec comp device."); basic question: what is "comp" device? > + goto err_ctrls_setup; > + } > + > ctx->type = MTK_INST_DECODER; > ret = dev->vdec_pdata->ctrls_setup(ctx); > if (ret) { > @@ -220,7 +283,6 @@ static int mtk_vcodec_probe(struct platform_device *pdev) > { > struct mtk_vcodec_dev *dev; > struct video_device *vfd_dec; > - struct resource *res; > phandle rproc_phandle; > enum mtk_vcodec_fw_type fw_type; > int ret; > @@ -249,32 +311,10 @@ static int mtk_vcodec_probe(struct platform_device *pdev) > if (IS_ERR(dev->fw_handler)) > return PTR_ERR(dev->fw_handler); > > - ret = mtk_vcodec_init_dec_pm(dev->plat_dev, &dev->pm); > - if (ret < 0) { > - dev_err(&pdev->dev, "Failed to get mt vcodec clock source"); > - goto err_dec_pm; > - } > - > - ret = mtk_vcodec_get_reg_bases(dev); > - if (ret) > - goto err_res; > - > - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); > - if (res == NULL) { > - dev_err(&pdev->dev, "failed to get irq resource"); > - ret = -ENOENT; > - goto err_res; > - } > - > - dev->dec_irq = platform_get_irq(pdev, 0); > - irq_set_status_flags(dev->dec_irq, IRQ_NOAUTOEN); > - ret = devm_request_irq(&pdev->dev, dev->dec_irq, > - mtk_vcodec_dec_irq_handler, 0, pdev->name, dev); > + ret = mtk_vcodec_init_dec_resources(dev); > if (ret) { > - dev_err(&pdev->dev, "Failed to install dev->dec_irq %d (%d)", > - dev->dec_irq, > - ret); > - goto err_res; > + dev_err(&pdev->dev, "Failed to init dec resources"); > + goto err_dec_pm; > } > > mutex_init(&dev->dec_mutex); > @@ -329,6 +369,15 @@ static int mtk_vcodec_probe(struct platform_device *pdev) > goto err_event_workq; > } > > + if (dev->vdec_pdata->is_subdev_supported) { > + ret = of_platform_populate(pdev->dev.of_node, NULL, NULL, > + &pdev->dev); > + if (ret) { > + mtk_v4l2_err("Main device of_platform_populate failed."); > + goto err_event_workq; > + } > + } > + > if (dev->vdec_pdata->uses_stateless_api) { > dev->mdev_dec.dev = &pdev->dev; > strscpy(dev->mdev_dec.model, MTK_VCODEC_DEC_NAME, > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.c > new file mode 100644 > index 000000000000..025a103008ba > --- /dev/null > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.c > @@ -0,0 +1,172 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2021 MediaTek Inc. > + * Author: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx> > + */ > + > +#include <linux/interrupt.h> > +#include <linux/irq.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_device.h> > +#include <linux/slab.h> > + > +#include "mtk_vcodec_drv.h" > +#include "mtk_vcodec_dec.h" > +#include "mtk_vcodec_dec_hw.h" > +#include "mtk_vcodec_dec_pm.h" > +#include "mtk_vcodec_intr.h" > +#include "mtk_vcodec_util.h" > + > +const struct of_device_id mtk_vdec_hw_match[] = { > + { > + .compatible = "mediatek,mtk-vcodec-lat", > + .data = (void *)MTK_VDEC_LAT0, > + }, Are we supposed to have LAT1 here as well? > + { > + .compatible = "mediatek,mtk-vcodec-core", > + .data = (void *)MTK_VDEC_CORE, > + }, > + {}, > +}; > +EXPORT_SYMBOL_GPL(mtk_vdec_hw_match); > + > +MODULE_DEVICE_TABLE(of, mtk_vdec_hw_match); > + > +static irqreturn_t mtk_vdec_hw_irq_handler(int irq, void *priv) > +{ > + struct mtk_vdec_hw_dev *dev = priv; > + struct mtk_vcodec_ctx *ctx; > + u32 cg_status; > + unsigned int dec_done_status; > + void __iomem *vdec_misc_addr = dev->reg_base[VDEC_HW_MISC] + > + VDEC_IRQ_CFG_REG; > + > + ctx = mtk_vcodec_get_curr_ctx(dev->main_dev); > + > + /* check if HW active or not */ > + cg_status = readl(dev->reg_base[VDEC_HW_SYS]); > + if (cg_status & VDEC_HW_ACTIVE) { > + mtk_v4l2_err("vdec active is not 0x0 (0x%08x)", > + cg_status); > + return IRQ_HANDLED; > + } > + > + dec_done_status = readl(vdec_misc_addr); > + if ((dec_done_status & MTK_VDEC_IRQ_STATUS_DEC_SUCCESS) != > + MTK_VDEC_IRQ_STATUS_DEC_SUCCESS) > + return IRQ_HANDLED; > + > + /* clear interrupt */ > + writel(dec_done_status | VDEC_IRQ_CFG, vdec_misc_addr); Is VDEC_IRQ_CFG also intended for clear interrupt? > + writel(dec_done_status & ~VDEC_IRQ_CLR, vdec_misc_addr); > + > + wake_up_ctx(ctx, MTK_INST_IRQ_RECEIVED); > + > + mtk_v4l2_debug(3, "wake up ctx %d, dec_done_status=%x", > + ctx->id, dec_done_status); > + > + return IRQ_HANDLED; > +} > + > +static int mtk_vdec_hw_init_irq(struct mtk_vdec_hw_dev *dev) > +{ > + struct platform_device *pdev = dev->plat_dev; > + int ret; > + > + dev->dec_irq = platform_get_irq(pdev, 0); > + if (dev->dec_irq < 0) { > + dev_err(&pdev->dev, "Failed to get irq resource"); > + return dev->dec_irq; > + } > + > + irq_set_status_flags(dev->dec_irq, IRQ_NOAUTOEN); > + ret = devm_request_irq(&pdev->dev, dev->dec_irq, > + mtk_vdec_hw_irq_handler, 0, pdev->name, dev); > + if (ret) { > + dev_err(&pdev->dev, "Failed to install dev->dec_irq %d (%d)", > + dev->dec_irq, ret); > + return ret; > + } > + > + return 0; > +} > + > +static int mtk_vdec_hw_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct mtk_vdec_hw_dev *subdev_dev; > + struct mtk_vcodec_dev *main_dev; > + const struct of_device_id *of_id; > + int hw_idx; > + int ret; > + > + if (!dev->parent) { > + dev_err(dev, "no parent for hardware devices.\n"); > + return -ENODEV; > + } > + > + main_dev = dev_get_drvdata(dev->parent); > + if (!main_dev) { > + dev_err(dev, "failed to get parent driver data"); > + return -EINVAL; > + } > + > + subdev_dev = devm_kzalloc(dev, sizeof(*subdev_dev), GFP_KERNEL); > + if (!subdev_dev) > + return -ENOMEM; > + > + subdev_dev->plat_dev = pdev; > + ret = mtk_vcodec_init_dec_pm(pdev, &subdev_dev->pm); > + if (ret) > + return ret; > + > + subdev_dev->reg_base[VDEC_HW_MISC] = > + devm_platform_ioremap_resource(pdev, 0); > + if (IS_ERR((__force void *)subdev_dev->reg_base[VDEC_HW_MISC])) { > + ret = PTR_ERR((__force void *)subdev_dev->reg_base[VDEC_HW_MISC]); > + goto err; > + } > + > + ret = mtk_vdec_hw_init_irq(subdev_dev); > + if (ret) > + goto err; > + > + of_id = of_match_device(mtk_vdec_hw_match, dev); > + if (!of_id) { > + dev_err(dev, "Can't get vdec subdev id.\n"); > + ret = -EINVAL; > + goto err; > + } > + > + hw_idx = (enum mtk_vdec_hw_id)(uintptr_t)of_id->data; > + if (hw_idx >= MTK_VDEC_HW_MAX) { > + dev_err(dev, "Hardware index %d not correct.\n", hw_idx); > + ret = -EINVAL; > + goto err; > + } > + > + main_dev->subdev_dev[hw_idx] = subdev_dev; > + subdev_dev->hw_idx = hw_idx; > + subdev_dev->main_dev = main_dev; > + subdev_dev->reg_base[VDEC_HW_SYS] = main_dev->reg_base[VDEC_HW_SYS]; > + set_bit(subdev_dev->hw_idx, main_dev->subdev_bitmap); > + > + platform_set_drvdata(pdev, subdev_dev); > + return 0; > +err: > + mtk_vcodec_release_dec_pm(&subdev_dev->pm); > + return ret; > +} > + > +static struct platform_driver mtk_vdec_driver = { > + .probe = mtk_vdec_hw_probe, > + .driver = { > + .name = "mtk-vdec-comp", > + .of_match_table = mtk_vdec_hw_match, > + }, > +}; > +module_platform_driver(mtk_vdec_driver); > + > +MODULE_LICENSE("GPL v2"); > +MODULE_DESCRIPTION("Mediatek video decoder hardware driver"); > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.h > new file mode 100644 > index 000000000000..f7f36790629d > --- /dev/null > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.h > @@ -0,0 +1,51 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2021 MediaTek Inc. > + * Author: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx> > + */ > + > +#ifndef _MTK_VCODEC_DEC_HW_H_ > +#define _MTK_VCODEC_DEC_HW_H_ > + > +#include <linux/io.h> > +#include <linux/platform_device.h> > + > +#include "mtk_vcodec_drv.h" > + > +#define VDEC_HW_ACTIVE 0x10 > +#define VDEC_IRQ_CFG 0x11 > +#define VDEC_IRQ_CLR 0x10 > +#define VDEC_IRQ_CFG_REG 0xa4 > + > +extern const struct of_device_id mtk_vdec_hw_match[MTK_VDEC_HW_MAX]; > + > +/** > + * enum mtk_vdec_hw_reg_idx - subdev hardware register base index > + */ > +enum mtk_vdec_hw_reg_idx { > + VDEC_HW_SYS, > + VDEC_HW_MISC, > + VDEC_HW_MAX > +}; > + > +/** > + * struct mtk_vdec_hw_dev - vdec hardware driver data > + * @plat_dev: platform device > + * @main_dev: main device > + * @reg_base: Mapped address of MTK Vcodec registers. > + * > + * @dec_irq: decoder irq resource > + * @pm: power management control > + * @hw_idx: each hardware index > + */ > +struct mtk_vdec_hw_dev { > + struct platform_device *plat_dev; > + struct mtk_vcodec_dev *main_dev; > + void __iomem *reg_base[VDEC_HW_MAX]; > + > + int dec_irq; > + struct mtk_vcodec_pm pm; > + int hw_idx; > +}; > + > +#endif /* _MTK_VCODEC_DEC_HW_H_ */ > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateful.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateful.c > index bef49244e61b..c7f9259ad094 100644 > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateful.c > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateful.c > @@ -625,4 +625,5 @@ const struct mtk_vcodec_dec_pdata mtk_vdec_8173_pdata = { > .num_framesizes = NUM_SUPPORTED_FRAMESIZE, > .worker = mtk_vdec_worker, > .flush_decoder = mtk_vdec_flush_decoder, > + .is_subdev_supported = false, > }; > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c > index 26e4d6f4ec04..2d285515b625 100644 > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c > @@ -357,6 +357,7 @@ const struct mtk_vcodec_dec_pdata mtk_vdec_8183_pdata = { 8173 might be only one for stateful. But we have multiple platforms for 8183. Shouldn't this name reflect this? > .uses_stateless_api = true, > .worker = mtk_vdec_worker, > .flush_decoder = mtk_vdec_flush_decoder, > + .is_subdev_supported = false, > }; > > const struct mtk_vcodec_dec_pdata mtk_lat_sig_core_pdata = { > @@ -373,4 +374,5 @@ const struct mtk_vcodec_dec_pdata mtk_lat_sig_core_pdata = { Which platforms is this supposed to be used? Some comments on this might be helpful. > .uses_stateless_api = true, > .worker = mtk_vdec_worker, > .flush_decoder = mtk_vdec_flush_decoder, > + .is_subdev_supported = true, > }; > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h > index 0fa9d85114b9..2160f26263ef 100644 > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h > @@ -93,6 +93,17 @@ enum mtk_fmt_type { > MTK_FMT_FRAME = 2, > }; > > +/** > + * struct mtk_vdec_hw_id - Hardware index used to separate > + * different hardware > + */ > +enum mtk_vdec_hw_id { > + MTK_VDEC_CORE, > + MTK_VDEC_LAT0, > + MTK_VDEC_LAT1, > + MTK_VDEC_HW_MAX, > +}; > + > /* > * struct mtk_video_fmt - Structure used to store information about pixelformats > */ > @@ -332,6 +343,7 @@ enum mtk_chip { > * > * @chip: chip this decoder is compatible with > * > + * @is_subdev_supported: whether support parent-node architecture(subdev) > * @uses_stateless_api: whether the decoder uses the stateless API with requests > */ > > @@ -353,6 +365,7 @@ struct mtk_vcodec_dec_pdata { > > enum mtk_chip chip; > > + bool is_subdev_supported; > bool uses_stateless_api; > }; > > @@ -423,6 +436,9 @@ struct mtk_vcodec_enc_pdata { > * @pm: power management control > * @dec_capability: used to identify decode capability, ex: 4k > * @enc_capability: used to identify encode capability > + * > + * @subdev_dev: subdev hardware device > + * @subdev_bitmap: used to record hardware is ready or not > */ > struct mtk_vcodec_dev { > struct v4l2_device v4l2_dev; > @@ -460,6 +476,9 @@ struct mtk_vcodec_dev { > struct mtk_vcodec_pm pm; > unsigned int dec_capability; > unsigned int enc_capability; > + > + void *subdev_dev[MTK_VDEC_HW_MAX]; > + DECLARE_BITMAP(subdev_bitmap, MTK_VDEC_HW_MAX); > }; > > static inline struct mtk_vcodec_ctx *fh_to_ctx(struct v4l2_fh *fh) > -- > 2.25.1 >