On Mon, Sep 6, 2021 at 5:29 AM Martin Kepplinger <martin.kepplinger@xxxxxxx> wrote: > > Document the bindings used for the SK Hynix Hi-846 CMOS camera driver. > > Signed-off-by: Martin Kepplinger <martin.kepplinger@xxxxxxx> > Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > --- > .../bindings/media/i2c/hynix,hi846.yaml | 120 ++++++++++++++++++ > 1 file changed, 120 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml > > diff --git a/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml > new file mode 100644 > index 000000000000..85a8877c2f38 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml > @@ -0,0 +1,120 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/i2c/hynix,hi846.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: SK Hynix Hi-846 1/4" 8M Pixel MIPI CSI-2 sensor > + > +maintainers: > + - Martin Kepplinger <martin.kepplinger@xxxxxxx> > + > +description: |- > + The Hi-846 is a raw image sensor with an MIPI CSI-2 image data > + interface and CCI (I2C compatible) control bus. The output format > + is raw Bayer. > + > +properties: > + compatible: > + const: hynix,hi846 > + > + reg: > + maxItems: 1 > + > + clocks: > + items: > + - description: Reference to the mclk clock. > + > + assigned-clocks: > + maxItems: 1 > + > + assigned-clock-rates: > + maxItems: 1 > + > + reset-gpios: > + description: Reference to the GPIO connected to the RESETB pin. Active low. > + maxItems: 1 > + > + shutdown-gpios: > + description: Reference to the GPIO connected to the XSHUTDOWN pin. Active low. > + maxItems: 1 > + > + vddio-supply: > + description: Definition of the regulator used for the VDDIO power supply. > + > + vdda-supply: > + description: Definition of the regulator used for the VDDA power supply. > + > + vddd-supply: > + description: Definition of the regulator used for the VDDD power supply. > + > + port: > + $ref: /schemas/graph.yaml#/properties/port This needs to be: $ref: /schemas/graph.yaml#/$defs/port-base to fix the warning reported. You have to use the 'main' branch of dtschema which has unevaluatedProperties support. I'll be making a release soonish. Rob
