Re: [RFC V2 0/2] arm64: imx8mm: Enable Hantro VPUs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Nov 30, 2021 at 5:33 PM Adam Ford <aford173@xxxxxxxxx> wrote:
>
> The i.MX8M has two Hantro video decoders, called G1 and G2 which appear
> to be related to the video decoders used on the i.MX8MQ, but because of
> how the Mini handles the power domains, the VPU driver does not need to
> handle all the functions, nor does it support the post-processor,
> so a new compatible flag is required.
>
> With the suggestion from Hans Verkuil, I was able to get the G2 splat to go away
> with changes to FORCE_MAX_ZONEORDER, but I found I could also set cma=512M, however
> it's unclear to me if that's an acceptable alternative.
>
> At the suggestion of Ezequiel Garcia and Nicolas Dufresne I have some
> results from Fluster. However, the G2 VPU appears to fail most tests.
>
> ./fluster.py run -dGStreamer-H.264-V4L2SL-Gst1.0
> Ran 90/135 tests successfully               in 76.431 secs
>
>  ./fluster.py run -d GStreamer-VP8-V4L2SL-Gst1.0
> Ran 55/61 tests successfully               in 21.454 secs
>
> ./fluster.py run -d GStreamer-VP9-V4L2SL-Gst1.0
> Ran 0/303 tests successfully               in 20.016 secs
>
> Each day seems to show more and more G2 submissions, and gstreamer seems to be
> still working on the VP9, so I am not sure if I should drop G2 as well.
>
>
> Adam Ford (2):
>   media: hantro: Add support for i.MX8M Mini
>   arm64: dts: imx8mm: Enable VPU-G1 and VPU-G2
>
>  arch/arm64/boot/dts/freescale/imx8mm.dtsi   | 41 +++++++++++++++
>  drivers/staging/media/hantro/hantro_drv.c   |  2 +
>  drivers/staging/media/hantro/hantro_hw.h    |  2 +
>  drivers/staging/media/hantro/imx8m_vpu_hw.c | 57 +++++++++++++++++++++
>  4 files changed, 102 insertions(+)
>

Adam,

That's for the patches!

I tested just this series on top of v5.16-rc3 on an
imx8mm-venice-gw73xx-0x and found that if I loop fluster I can end up
getting a hang within 10 to 15 mins or so when imx8m_blk_ctrl_power_on
is called for VPUMIX pd :
while [ 1 ]; do uptime; ./fluster.py run -d GStreamer-VP8-V4L2SL-Gst1.0; done
...
[  618.838436] imx-pgc imx-pgc-domain.6: failed to command PGC
[  618.844407] imx8m-blk-ctrl 38330000.blk-ctrl: failed to power up bus domain

I added prints in imx_pgc_power_{up,down} and
imx8m_blk_ctrl_power_{on,off} to get some more context
...
Ran 55/61 tests successfully               in 8.685 secs
 17:16:34 up 17 min,  0 users,  load average: 3.97, 2.11, 0.93
********************************************************************************
********************
Running test suite VP8-TEST-VECTORS with decoder GStreamer-VP8-V4L2SL-Gst1.0
Using 4 parallel job(s)
********************************************************************************
********************

[TEST SUITE      ] (DECODER                    ) TEST VECTOR               ... R
ESULT
----------------------------------------------------------------------
[ 1023.114806] imx8m_blk_ctrl_power_on vpublk-g1
[ 1023.119669] imx_pgc_power_up vpumix
[ 1023.124307] imx-pgc imx-pgc-domain.6: failed to command PGC
[ 1023.130006] imx8m-blk-ctrl 38330000.blk-ctrl: failed to power up bus domain

While this wouldn't be an issue with this series it does indicate we
still have something racy in blk-ctrl. Can you reproduce this (and if
not what kernel are you based on)? Perhaps you or Lucas have some
ideas?

Best regards,

Tim



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux