Hi Martin, On Fri, Nov 26, 2021 at 11:02:31AM +0100, Martin Kepplinger wrote: > Am Donnerstag, dem 25.11.2021 um 12:15 +0100 schrieb Geert > Uytterhoeven: > > On Mon, Sep 6, 2021 at 12:30 PM Martin Kepplinger > > <martin.kepplinger@xxxxxxx> wrote: > > > Document the bindings used for the SK Hynix Hi-846 CMOS camera > > > driver. > > > > > > Signed-off-by: Martin Kepplinger <martin.kepplinger@xxxxxxx> > > > Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > > > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > > > --- > > > .../bindings/media/i2c/hynix,hi846.yaml | 120 > > > ++++++++++++++++++ > > > 1 file changed, 120 insertions(+) > > > create mode 100644 > > > Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml > > > > > > diff --git > > > a/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml > > > b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml > > > new file mode 100644 > > > index 000000000000..85a8877c2f38 > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml > > > @@ -0,0 +1,120 @@ > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > > +%YAML 1.2 > > > +--- > > > +$id: http://devicetree.org/schemas/media/i2c/hynix,hi846.yaml# > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > + > > > +title: SK Hynix Hi-846 1/4" 8M Pixel MIPI CSI-2 sensor > > > + > > > +maintainers: > > > + - Martin Kepplinger <martin.kepplinger@xxxxxxx> > > > + > > > +description: |- > > > + The Hi-846 is a raw image sensor with an MIPI CSI-2 image data > > > + interface and CCI (I2C compatible) control bus. The output > > > format > > > + is raw Bayer. > > > + > > > +properties: > > > + compatible: > > > + const: hynix,hi846 > > > + > > > + reg: > > > + maxItems: 1 > > > + > > > + clocks: > > > + items: > > > + - description: Reference to the mclk clock. > > > + > > > + assigned-clocks: > > > + maxItems: 1 > > > + > > > + assigned-clock-rates: > > > + maxItems: 1 > > > + > > > + reset-gpios: > > > + description: Reference to the GPIO connected to the RESETB > > > pin. Active low. > > > + maxItems: 1 > > > + > > > + shutdown-gpios: > > > + description: Reference to the GPIO connected to the XSHUTDOWN > > > pin. Active low. > > > + maxItems: 1 > > > + > > > + vddio-supply: > > > + description: Definition of the regulator used for the VDDIO > > > power supply. > > > + > > > + vdda-supply: > > > + description: Definition of the regulator used for the VDDA > > > power supply. > > > + > > > + vddd-supply: > > > + description: Definition of the regulator used for the VDDD > > > power supply. > > > + > > > + port: > > > + $ref: /schemas/graph.yaml#/properties/port > > > + > > > + properties: > > > + endpoint: > > > + $ref: /schemas/media/video-interfaces.yaml# > > > + unevaluatedProperties: false > > > + > > > + properties: > > > + data-lanes: > > > + oneOf: > > > + - items: > > > + - const: 1 > > > + - const: 2 > > > + - const: 3 > > > + - const: 4 > > > + - items: > > > + - const: 1 > > > + - const: 2 > > > + > > > + required: > > > + - data-lanes > > > + > > > +required: > > > + - compatible > > > + - reg > > > + - clocks > > > + - assigned-clocks > > > + - assigned-clock-rates > > > + - vddio-supply > > > + - vdda-supply > > > + - vddd-supply > > > + - port > > > + > > > +additionalProperties: false > > > + > > > +examples: > > > + - | > > > + #include <dt-bindings/gpio/gpio.h> > > > + > > > + i2c { > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > + hi846: camera@20 { > > > + compatible = "hynix,hi846"; > > > + reg = <0x20>; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pinctrl_csi1>; > > > + clocks = <&clk 0>; > > > + assigned-clocks = <&clk 0>; > > > + assigned-clock-rates = <25000000>; > > > + vdda-supply = <®_camera_vdda>; > > > + vddd-supply = <®_camera_vddd>; > > > + vddio-supply = <®_camera_vddio>; > > > + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; > > > + shutdown-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>; > > > + > > > + port { > > > + camera_out: endpoint { > > > + remote-endpoint = <&csi1_ep1>; > > > + link-frequencies = /bits/ 64 > > > + <80000000 200000000>; > > > + data-lanes = <1 2>; > > > > "make dt_binding_check": > > > > > > Documentation/devicetree/bindings/media/i2c/hynix,hi846.example.dt.ya > > ml: > > camera@20: port:endpoint: Unevaluated properties are not allowed > > ('link-frequencies', 'data-lanes' were unexpected) > > From schema: > > Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml > > > > > + }; > > > + }; > > > + }; > > > + }; > > > > Gr{oetje,eeting}s, > > > > Geert > > > thanks a lot Geert, but I can't reproduce this on linux-next. Which > tree did you run it against? > > What I *do* see is the following during dtbs_check, so I guess I could > remove "orientation" and "rotation" from the example, which would be > kind of sad because these useful properties are not yet too wide know > anyway in the media device driver world... > > /home/martin/dev/purism-forks/linux- > next/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dt.yaml: > camera-front@20: 'orientation', 'rotation' do not match any of the > regexes: 'pinctrl-[0-9]+' > From schema: /home/martin/dev/purism-forks/linux- > next/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml > > > if you can be more speicific I'll definitely try to reproduce again > though. link-frequencies is present in the example (as it needs to be) but missing from required properties. I don't know why there's a complaint about data-lanes though. -- Regards, Sakari Ailus
