Re: [PATCH 11/15] iio: buffer-dma: Boost performance using write-combine cache setting

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jonathan,

Le dim., nov. 21 2021 at 17:43:20 +0000, Paul Cercueil <paul@xxxxxxxxxxxxxxx> a écrit :
Hi Jonathan,

Le dim., nov. 21 2021 at 15:00:37 +0000, Jonathan Cameron <jic23@xxxxxxxxxx> a écrit :
On Mon, 15 Nov 2021 14:19:21 +0000
Paul Cercueil <paul@xxxxxxxxxxxxxxx> wrote:

 We can be certain that the input buffers will only be accessed by
userspace for reading, and output buffers will mostly be accessed by
 userspace for writing.

Mostly?  Perhaps a little more info on why that's not 'only'.

Just like with a framebuffer, it really depends on what the application does. Most of the cases it will just read sequentially an input buffer, or write sequentially an output buffer. But then you get the exotic application that will try to do something like alpha blending, which means read+write. Hence "mostly".


Therefore, it makes more sense to use only fully cached input buffers, and to use the write-combine cache coherency setting for output buffers.

This boosts performance, as the data written to the output buffers does not have to be sync'd for coherency. It will halve performance if the userspace application tries to read from the output buffer, but this
 should never happen.

Since we don't need to sync the cache when disabling CPU access either for input buffers or output buffers, the .end_cpu_access() callback can
 be dropped completely.

We have an odd mix of coherent and non coherent DMA in here as you noted,
but are you sure this is safe on all platforms?

The mix isn't safe, but using only coherent or only non-coherent should be safe, yes.



 Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>

Any numbers to support this patch?  The mapping types are performance
optimisations so nice to know how much of a difference they make.

Output buffers are definitely faster in write-combine mode. On a ZedBoard with a AD9361 transceiver set to 66 MSPS, and buffer/size set to 8192, I would get about 185 MiB/s before, 197 MiB/s after.

Input buffers... early results are mixed. On ARM32 it does look like it is slightly faster to read from *uncached* memory than reading from cached memory. The cache sync does take a long time.

Other architectures might have a different result, for instance on MIPS invalidating the cache is a very fast operation, so using cached buffers would be a huge win in performance.

Setups where the DMA operations are coherent also wouldn't require any cache sync and this patch would give a huge win in performance.

I'll run some more tests next week to have some fresh numbers.

I think I mixed things up before, because I get different results now.

Here are some fresh benchmarks, triple-checked, using libiio's iio_readdev and iio_writedev tools, with 64K samples buffers at 61.44 MSPS (max. theorical throughput: 234 MiB/s):
 iio_readdev -b 65536 cf-ad9361-lpc voltage0 voltage1 | pv > /dev/null
pv /dev/zero | iio_writedev -b 65536 cf-ad9361-dds-core-lpc voltage0 voltage1

Coherent mapping:
- fileio:
   read:	125 MiB/s
   write:	141 MiB/s
- dmabuf:
   read:	171 MiB/s
   write:	210 MiB/s

Coherent reads + Write-combine writes:
- fileio:
   read:	125 MiB/s
   write:	141 MiB/s
- dmabuf:
   read:	171 MiB/s
   write:	210 MiB/s

Non-coherent mapping:
- fileio:
   read:	119 MiB/s
   write:	124 MiB/s
- dmabuf:
   read:	159 MiB/s
   write:	124 MiB/s

Non-coherent reads + write-combine writes:
- fileio:
   read:	119 MiB/s
   write:	140 MiB/s
- dmabuf:
   read:	159 MiB/s
   write:	210 MiB/s

Non-coherent mapping with no cache sync:
- fileio:
   read:	156 MiB/s
   write:	123 MiB/s
- dmabuf:
   read:	234 MiB/s (capped by sample rate)
   write:	182 MiB/s

Non-coherent reads with no cache sync + write-combine writes:
- fileio:
   read:	156 MiB/s
   write:	140 MiB/s
- dmabuf:
   read:	234 MiB/s (capped by sample rate)
   write:	210 MiB/s


A few things we can deduce from this:

* Write-combine is not available on Zynq/ARM? If it was working, it should give a better performance than the coherent mapping, but it doesn't seem to do anything at all. At least it doesn't harm performance.

* Non-coherent + cache invalidation is definitely a good deal slower than using coherent mapping, at least on ARM32. However, when the cache sync is disabled (e.g. if the DMA operations are coherent) the reads are much faster.

* The new dma-buf based API is a great deal faster than the fileio API.

So in the future we could use coherent reads + write-combine writes, unless we know the DMA operations are coherent, and in this case use non-coherent reads + write-combine writes.

Regarding this patch, unfortunately I cannot prove that write-combine is faster, so I'll just drop this patch for now.

Cheers,
-Paul





[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux