I am trying to use an OV5640 camera sensor that I've used on both an
i.MX6Q and an i.MX8M Mini (with good success) on an RZ/G2[MNH] board
connected to the 2-lane CSI interface.
I can get the media-ctl to show the routings, and sometimes I can get
streaming. Often, I get a timeout:
rcar-csi2 fea80000.csi2: Timeout waiting for LP-11 state
Looking at the various mailing list e-mails for the LP-11, it's
unclear to me if the timeout is caused by the sensor not doing
something correctly or the CSI2 misbehaving.
I was hoping someone might have some suggestions of things I can try.
Thank you,
adam
