Re: [PATCH v8 2/3] media: dt-bindings: Add Intersil ISL79987 DT bindings

[Michael Tretter <m.tretter@xxxxxxxxxxxxxx>]

On Tue, 23 Nov 2021 13:07:00 +0200, Sakari Ailus wrote:
> On Tue, Nov 23, 2021 at 11:15:16AM +0100, Michael Tretter wrote:
> > From: Marek Vasut <marex@xxxxxxx>
> > 
> > Add bindings for the Intersil ISL79987 analog to MIPI CSI-2 decoder.
> > 
> > Signed-off-by: Marek Vasut <marex@xxxxxxx>
> > Cc: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
> > Cc: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
> > Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> > Cc: devicetree@xxxxxxxxxxxxxxx
> > To: linux-media@xxxxxxxxxxxxxxx
> > Signed-off-by: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> > ---
> > Changelog:
> > 
> > v8: none
> > 
> > v7: none
> > 
> > v6: none
> > 
> > v5: none
> > 
> > v4: none
> > 
> > v3:
> > 
> > - rename pd-gpios property to powerdown-gpios
> > - reference graph.yaml for ports/port properties
> > - remove reference to video-interfaces.txt
> > - remove unnecessary description of ports property
> > 
> > v2:
> > 
> > - convert binding to yaml
> > - change description to match only isl79987
> > - replace num-inputs property with multiple ports
> > - add reset gpio
> > ---
> >  .../bindings/media/i2c/isil,isl79987.yaml     | 100 ++++++++++++++++++
> >  1 file changed, 100 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/i2c/isil,isl79987.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/media/i2c/isil,isl79987.yaml b/Documentation/devicetree/bindings/media/i2c/isil,isl79987.yaml
> > new file mode 100644
> > index 000000000000..aee4a5966df3
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/i2c/isil,isl79987.yaml
> > @@ -0,0 +1,100 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/i2c/isil,isl79987.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Intersil ISL79987 Analog to MIPI CSI-2 decoder
> > +
> > +maintainers:
> > +  - Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
> > +  - Marek Vasut <marex@xxxxxxx>
> > +
> > +description:
> > +  The Intersil ISL79987 is an analog to MIPI CSI-2 decoder which is capable of
> > +  receiving up to four analog stream and multiplexing them into up to four MIPI
> > +  CSI-2 virtual channels, using one MIPI clock lane and 1/2 data lanes.
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - isil,isl79987
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  reset-gpios:
> > +    maxItems: 1
> > +    description:
> > +      A GPIO spec for the RSTB pin (active high)
> > +
> > +  powerdown-gpios:
> > +    maxItems: 1
> > +    description:
> > +      A GPIO spec for the Power Down pin (active high)
> > +
> > +  ports:
> > +    $ref: /schemas/graph.yaml#/properties/ports
> > +    properties:
> > +      port@0:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description: Output port
> 
> I think you need need the data-lanes property for endpoints on this port.

Thanks. The bot also found that the clock-lanes property is missing, too.

The following specification seems to satisfy the checker, but I'm not
completely sure, if it is actually correct:

	port@0:
	  $ref: /schemas/graph.yaml#/$defs/port-base
	  unevaluatedProperties: false
	  description: Output port

	  properties:
	    endpoint:
	      $ref: /schemas/media/video-interfaces.yaml#
	      unevaluatedProperties: false

	      properties:
		clock-lanes:
		  maxItems: 1

		data-lanes:
		  minItems: 1
		  maxItems: 2

	      required:
		- clock-lanes
		- data-lanes

Is this how I can correctly add the clock-lanes and data-lanes properties to
the endpoint?

Michael

> 
> > +
> > +    patternProperties:
> > +      "^port@[1-4]$":
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description: Input ports
> > +
> > +    required:
> > +      - port@0
> > +
> > +additionalProperties: false
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - ports
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/gpio/gpio.h>
> > +
> > +    i2c {
> > +      #address-cells = <1>;
> > +      #size-cells = <0>;
> > +
> > +      isl7998x_mipi@44 {
> > +        compatible = "isil,isl79987";
> > +        reg = <0x44>;
> > +        powerdown-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
> > +        reset-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
> > +
> > +        ports {
> > +          #address-cells = <1>;
> > +          #size-cells = <0>;
> > +
> > +          port@0 {
> > +            reg = <0>;
> > +            isl79987_out: endpoint {
> > +              remote-endpoint = <&mipi_csi2_in>;
> > +              clock-lanes = <0>;
> > +              data-lanes = <1 2>;
> > +            };
> > +          };
> > +
> > +          port@1 {
> > +            reg = <1>;
> > +            endpoint {
> > +              remote-endpoint = <&camera_0>;
> > +            };
> > +          };
> > +
> > +          port@2 {
> > +            reg = <2>;
> > +            endpoint {
> > +              remote-endpoint = <&camera_1>;
> > +            };
> > +          };
> > +        };
> > +      };
> > +    };
> 
> -- 
> Kind regards,
> 
> Sakari Ailus
>