Re: [PATCH 3/7] media: hantro: vp9: add support for legacy register set

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jernej,

W dniu 22.11.2021 o 19:46, Jernej Skrabec pisze:
Some older G2 cores uses slightly different register set for HEVC and
VP9. Since vast majority of registers and logic is the same, it doesn't
make sense to introduce another drivers.

Add legacy_regs quirk and implement only VP9 changes for now. HEVC
changes will be introduced later, if needed.

Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxxx>
---
  drivers/staging/media/hantro/hantro.h         |  2 +
  drivers/staging/media/hantro/hantro_g2_regs.h | 19 +++++
  .../staging/media/hantro/hantro_g2_vp9_dec.c  | 74 ++++++++++++++-----
  3 files changed, 78 insertions(+), 17 deletions(-)

diff --git a/drivers/staging/media/hantro/hantro.h b/drivers/staging/media/hantro/hantro.h
index d03824fa3222..83ed25d9657b 100644
--- a/drivers/staging/media/hantro/hantro.h
+++ b/drivers/staging/media/hantro/hantro.h
@@ -74,6 +74,7 @@ struct hantro_irq {
   * @reg_names:			array of register range names
   * @num_regs:			number of register range names in the array
   * @double_buffer:		core needs double buffering
+ * @legacy_regs:		core uses legacy register set
   */
  struct hantro_variant {
  	unsigned int enc_offset;
@@ -96,6 +97,7 @@ struct hantro_variant {
  	const char * const *reg_names;
  	int num_regs;
  	unsigned int double_buffer : 1;
+	unsigned int legacy_regs : 1;
  };
/**
diff --git a/drivers/staging/media/hantro/hantro_g2_regs.h b/drivers/staging/media/hantro/hantro_g2_regs.h
index 15a391a4650e..d7c2ff05208e 100644
--- a/drivers/staging/media/hantro/hantro_g2_regs.h
+++ b/drivers/staging/media/hantro/hantro_g2_regs.h
@@ -37,6 +37,13 @@
#define g2_strm_swap G2_DEC_REG(2, 28, 0xf)
  #define g2_dirmv_swap		G2_DEC_REG(2, 20, 0xf)
+/* used on older variants */
+#define g2_strm_swap_old	G2_DEC_REG(2, 27, 0x1f)
+#define g2_pic_swap		G2_DEC_REG(2, 22, 0x1f)
+#define g2_dirmv_swap_old	G2_DEC_REG(2, 17, 0x1f)
+#define g2_tab0_swap		G2_DEC_REG(2, 12, 0x1f)
+#define g2_tab1_swap		G2_DEC_REG(2, 7, 0x1f)
+#define g2_tab2_swap		G2_DEC_REG(2, 2, 0x1f)\

Please rename g2_tab[0-2]_swap to g2_tab[0-2]_swap_old. Similar names
exist in newer variants (even if not used at the moment).

It is rather difficult to come up with a consistent rule with regard
to in what sequence to arrange these register definitions. It seems
to me that you use a hybrid approach: if the definitions being added
fall "out of order" then you annotate with a comment about older variants,
and if they are "in order" then you simply fold them into their place.

I don't have a very strong opinion, but maybe they all should be
just "in bitfield order" and without comments?

#define g2_mode G2_DEC_REG(3, 27, 0x1f)
  #define g2_compress_swap	G2_DEC_REG(3, 20, 0xf)
@@ -45,6 +52,8 @@
  #define g2_out_dis		G2_DEC_REG(3, 15, 0x1)
  #define g2_out_filtering_dis	G2_DEC_REG(3, 14, 0x1)
  #define g2_write_mvs_e		G2_DEC_REG(3, 12, 0x1)
+#define g2_tab3_swap		G2_DEC_REG(3, 7, 0x1f)

g2_tab3_swap_old

With all the above addressed you can add my

Reviewied-by: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxxxx>

+#define g2_rscan_swap		G2_DEC_REG(3, 2, 0x1f)
#define g2_pic_width_in_cbs G2_DEC_REG(4, 19, 0x1fff)
  #define g2_pic_height_in_cbs	G2_DEC_REG(4, 6,  0x1fff)
@@ -58,6 +67,7 @@
  #define g2_tempor_mvp_e		G2_DEC_REG(5, 11, 0x1)
  #define g2_max_cu_qpd_depth	G2_DEC_REG(5, 5,  0x3f)
  #define g2_cu_qpd_e		G2_DEC_REG(5, 4,  0x1)
+#define g2_pix_shift		G2_DEC_REG(5, 0,  0xf)
#define g2_stream_len G2_DEC_REG(6, 0, 0xffffffff) @@ -80,6 +90,8 @@ #define g2_const_intra_e G2_DEC_REG(8, 31, 0x1)
  #define g2_filt_ctrl_pres	G2_DEC_REG(8, 30, 0x1)
+#define g2_bit_depth_y		G2_DEC_REG(8, 21, 0xf)
+#define g2_bit_depth_c		G2_DEC_REG(8, 17, 0xf)
  #define g2_idr_pic_e		G2_DEC_REG(8, 16, 0x1)
  #define g2_bit_depth_pcm_y	G2_DEC_REG(8, 12, 0xf)
  #define g2_bit_depth_pcm_c	G2_DEC_REG(8, 8,  0xf)
@@ -87,6 +99,9 @@
  #define g2_bit_depth_c_minus8	G2_DEC_REG(8, 4,  0x3)
  #define g2_output_8_bits	G2_DEC_REG(8, 3,  0x1)
  #define g2_output_format	G2_DEC_REG(8, 0,  0x7)
+/* used on older variants */
+#define g2_rs_out_bit_depth	G2_DEC_REG(8, 4,  0xf)
+#define g2_pp_pix_shift		G2_DEC_REG(8, 0,  0xf)
#define g2_refidx1_active G2_DEC_REG(9, 19, 0x1f)
  #define g2_refidx0_active	G2_DEC_REG(9, 14, 0x1f)
@@ -98,6 +113,10 @@
  #define g2_num_tile_rows	G2_DEC_REG(10, 14, 0x1f)
  #define g2_tile_e		G2_DEC_REG(10, 1,  0x1)
  #define g2_entropy_sync_e	G2_DEC_REG(10, 0,  0x1)
+/* used on older variants */
+#define g2_init_qp_old		G2_DEC_REG(10, 25, 0x3f)
+#define g2_num_tile_cols_old	G2_DEC_REG(10, 20, 0x1f)
+#define g2_num_tile_rows_old	G2_DEC_REG(10, 15, 0x1f)
#define vp9_transform_mode G2_DEC_REG(11, 27, 0x7)
  #define vp9_filt_sharpness	G2_DEC_REG(11, 21, 0x7)
diff --git a/drivers/staging/media/hantro/hantro_g2_vp9_dec.c b/drivers/staging/media/hantro/hantro_g2_vp9_dec.c
index d4fc649a4da1..5aac32700cd0 100644
--- a/drivers/staging/media/hantro/hantro_g2_vp9_dec.c
+++ b/drivers/staging/media/hantro/hantro_g2_vp9_dec.c
@@ -150,7 +150,8 @@ static void config_output(struct hantro_ctx *ctx,
  	dma_addr_t luma_addr, chroma_addr, mv_addr;
hantro_reg_write(ctx->dev, &g2_out_dis, 0);
-	hantro_reg_write(ctx->dev, &g2_output_format, 0);
+	if (!ctx->dev->variant->legacy_regs)
+		hantro_reg_write(ctx->dev, &g2_output_format, 0);
luma_addr = hantro_get_dec_buf_addr(ctx, &dst->base.vb.vb2_buf);
  	hantro_write_addr(ctx->dev, G2_OUT_LUMA_ADDR, luma_addr);
@@ -327,6 +328,7 @@ config_tiles(struct hantro_ctx *ctx,
  	struct hantro_aux_buf *tile_edge = &vp9_ctx->tile_edge;
  	dma_addr_t addr;
  	unsigned short *tile_mem;
+	unsigned int rows, cols;
addr = misc->dma + vp9_ctx->tile_info_offset;
  	hantro_write_addr(ctx->dev, G2_TILE_SIZES_ADDR, addr);
@@ -344,17 +346,24 @@ config_tiles(struct hantro_ctx *ctx,
fill_tile_info(ctx, tile_r, tile_c, sbs_r, sbs_c, tile_mem); + cols = tile_c;
+		rows = tile_r;
  		hantro_reg_write(ctx->dev, &g2_tile_e, 1);
-		hantro_reg_write(ctx->dev, &g2_num_tile_cols, tile_c);
-		hantro_reg_write(ctx->dev, &g2_num_tile_rows, tile_r);
-
  	} else {
  		tile_mem[0] = hantro_vp9_num_sbs(dst->vp9.width);
  		tile_mem[1] = hantro_vp9_num_sbs(dst->vp9.height);
+ cols = 1;
+		rows = 1;
  		hantro_reg_write(ctx->dev, &g2_tile_e, 0);
-		hantro_reg_write(ctx->dev, &g2_num_tile_cols, 1);
-		hantro_reg_write(ctx->dev, &g2_num_tile_rows, 1);
+	}
+
+	if (ctx->dev->variant->legacy_regs) {
+		hantro_reg_write(ctx->dev, &g2_num_tile_cols_old, cols);
+		hantro_reg_write(ctx->dev, &g2_num_tile_rows_old, rows);
+	} else {
+		hantro_reg_write(ctx->dev, &g2_num_tile_cols, cols);
+		hantro_reg_write(ctx->dev, &g2_num_tile_rows, rows);
  	}
/* provide aux buffers even if no tiles are used */
@@ -505,8 +514,22 @@ static void config_picture_dimensions(struct hantro_ctx *ctx, struct hantro_deco
  static void
  config_bit_depth(struct hantro_ctx *ctx, const struct v4l2_ctrl_vp9_frame *dec_params)
  {
-	hantro_reg_write(ctx->dev, &g2_bit_depth_y_minus8, dec_params->bit_depth - 8);
-	hantro_reg_write(ctx->dev, &g2_bit_depth_c_minus8, dec_params->bit_depth - 8);
+	if (ctx->dev->variant->legacy_regs) {
+		u8 pp_shift = 0;
+
+		hantro_reg_write(ctx->dev, &g2_bit_depth_y, dec_params->bit_depth);
+		hantro_reg_write(ctx->dev, &g2_bit_depth_c, dec_params->bit_depth);
+		hantro_reg_write(ctx->dev, &g2_rs_out_bit_depth, dec_params->bit_depth);
+
+		if (dec_params->bit_depth > 8)
+			pp_shift = 16 - dec_params->bit_depth;
+
+		hantro_reg_write(ctx->dev, &g2_pp_pix_shift, pp_shift);
+		hantro_reg_write(ctx->dev, &g2_pix_shift, 0);
+	} else {
+		hantro_reg_write(ctx->dev, &g2_bit_depth_y_minus8, dec_params->bit_depth - 8);
+		hantro_reg_write(ctx->dev, &g2_bit_depth_c_minus8, dec_params->bit_depth - 8);
+	}
  }
static inline bool is_lossless(const struct v4l2_vp9_quantization *quant)
@@ -784,9 +807,13 @@ config_source(struct hantro_ctx *ctx, const struct v4l2_ctrl_vp9_frame *dec_para
  		     + dec_params->compressed_header_size;
stream_base = vb2_dma_contig_plane_dma_addr(&vb2_src->vb2_buf, 0);
-	hantro_write_addr(ctx->dev, G2_STREAM_ADDR, stream_base);
tmp_addr = stream_base + headres_size;
+	if (ctx->dev->variant->legacy_regs)
+		hantro_write_addr(ctx->dev, G2_STREAM_ADDR, (tmp_addr & ~0xf));
+	else
+		hantro_write_addr(ctx->dev, G2_STREAM_ADDR, stream_base);
+
  	start_bit = (tmp_addr & 0xf) * 8;
  	hantro_reg_write(ctx->dev, &g2_start_bit, start_bit);
@@ -794,10 +821,12 @@ config_source(struct hantro_ctx *ctx, const struct v4l2_ctrl_vp9_frame *dec_para
  	src_len += start_bit / 8 - headres_size;
  	hantro_reg_write(ctx->dev, &g2_stream_len, src_len);
- tmp_addr &= ~0xf;
-	hantro_reg_write(ctx->dev, &g2_strm_start_offset, tmp_addr - stream_base);
-	src_buf_len = vb2_plane_size(&vb2_src->vb2_buf, 0);
-	hantro_reg_write(ctx->dev, &g2_strm_buffer_len, src_buf_len);
+	if (!ctx->dev->variant->legacy_regs) {
+		tmp_addr &= ~0xf;
+		hantro_reg_write(ctx->dev, &g2_strm_start_offset, tmp_addr - stream_base);
+		src_buf_len = vb2_plane_size(&vb2_src->vb2_buf, 0);
+		hantro_reg_write(ctx->dev, &g2_strm_buffer_len, src_buf_len);
+	}
  }
static void
@@ -837,13 +866,24 @@ config_registers(struct hantro_ctx *ctx, const struct v4l2_ctrl_vp9_frame *dec_p
/* configure basic registers */
  	hantro_reg_write(ctx->dev, &g2_mode, VP9_DEC_MODE);
-	hantro_reg_write(ctx->dev, &g2_strm_swap, 0xf);
-	hantro_reg_write(ctx->dev, &g2_dirmv_swap, 0xf);
-	hantro_reg_write(ctx->dev, &g2_compress_swap, 0xf);
+	if (!ctx->dev->variant->legacy_regs) {
+		hantro_reg_write(ctx->dev, &g2_strm_swap, 0xf);
+		hantro_reg_write(ctx->dev, &g2_dirmv_swap, 0xf);
+		hantro_reg_write(ctx->dev, &g2_compress_swap, 0xf);
+		hantro_reg_write(ctx->dev, &g2_ref_compress_bypass, 1);
+	} else {
+		hantro_reg_write(ctx->dev, &g2_strm_swap_old, 0x1f);
+		hantro_reg_write(ctx->dev, &g2_pic_swap, 0x10);
+		hantro_reg_write(ctx->dev, &g2_dirmv_swap_old, 0x10);
+		hantro_reg_write(ctx->dev, &g2_tab0_swap, 0x10);
+		hantro_reg_write(ctx->dev, &g2_tab1_swap, 0x10);
+		hantro_reg_write(ctx->dev, &g2_tab2_swap, 0x10);
+		hantro_reg_write(ctx->dev, &g2_tab3_swap, 0x10);
+		hantro_reg_write(ctx->dev, &g2_rscan_swap, 0x10);
+	}
  	hantro_reg_write(ctx->dev, &g2_buswidth, BUS_WIDTH_128);
  	hantro_reg_write(ctx->dev, &g2_max_burst, 16);
  	hantro_reg_write(ctx->dev, &g2_apf_threshold, 8);
-	hantro_reg_write(ctx->dev, &g2_ref_compress_bypass, 1);
  	hantro_reg_write(ctx->dev, &g2_clk_gate_e, 1);
  	hantro_reg_write(ctx->dev, &g2_max_cb_size, 6);
  	hantro_reg_write(ctx->dev, &g2_min_cb_size, 3);





[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux