On Mon, 15 Nov 2021 14:19:17 +0000
Paul Cercueil <paul@xxxxxxxxxxxxxxx> wrote:
> Add the necessary infrastructure to the IIO core to support a new DMABUF
> based interface.
>
> The advantage of this new DMABUF based interface vs. the read()
> interface, is that it avoids an extra copy of the data between the
> kernel and userspace. This is particularly userful for high-speed
> devices which produce several megabytes or even gigabytes of data per
> second.
>
> The data in this new DMABUF interface is managed at the granularity of
> DMABUF objects. Reducing the granularity from byte level to block level
> is done to reduce the userspace-kernelspace synchronization overhead
> since performing syscalls for each byte at a few Mbps is just not
> feasible.
>
> This of course leads to a slightly increased latency. For this reason an
> application can choose the size of the DMABUFs as well as how many it
> allocates. E.g. two DMABUFs would be a traditional double buffering
> scheme. But using a higher number might be necessary to avoid
> underflow/overflow situations in the presence of scheduling latencies.
>
> As part of the interface, 2 new IOCTLs have been added:
>
> IIO_BUFFER_DMABUF_ALLOC_IOCTL(struct iio_dmabuf_alloc_req *):
> Each call will allocate a new DMABUF object. The return value (if not
> a negative errno value as error) will be the file descriptor of the new
> DMABUF.
>
> IIO_BUFFER_DMABUF_ENQUEUE_IOCTL(struct iio_dmabuf *):
> Place the DMABUF object into the queue pending for hardware process.
>
> These two IOCTLs have to be performed on the IIO buffer's file
> descriptor (either opened from the corresponding /dev/iio:deviceX, or
> obtained using the IIO_BUFFER_GET_FD_IOCTL() ioctl).
Unrelated to this patch except tangentially. Maybe we should enable
new buffer features only on the IIO_BUFFER_GET_FD_IOCTL() route as
we probably want to deprecate the old interfaces due to the it only
supporting a single buffer / datastream per device.
Possibly something for another day...
Nothing to add on actual code...
Jonathan
>
> To access the data stored in a block by userspace the block must be
> mapped to the process's memory. This is done by calling mmap() on the
> DMABUF's file descriptor.
>
> Before accessing the data through the map, you must use the
> DMA_BUF_IOCTL_SYNC(struct dma_buf_sync *) ioctl, with the
> DMA_BUF_SYNC_START flag, to make sure that the data is available.
> This call may block until the hardware is done with this block. Once
> you are done reading or writing the data, you must use this ioctl again
> with the DMA_BUF_SYNC_END flag, before enqueueing the DMABUF to the
> kernel's queue.
>
> If you need to know when the hardware is done with a DMABUF, you can
> poll its file descriptor for the EPOLLOUT event.
>
> Finally, to destroy a DMABUF object, simply call close() on its file
> descriptor.
>
> A typical workflow for the new interface is:
>
> for block in blocks:
> DMABUF_ALLOC block
> mmap block
>
> enable buffer
>
> while !done
> for block in blocks:
> DMABUF_ENQUEUE block
>
> DMABUF_SYNC_START block
> process data
> DMABUF_SYNC_END block
>
> disable buffer
>
> for block in blocks:
> close block
>
> Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> ---
> drivers/iio/industrialio-buffer.c | 44 +++++++++++++++++++++++++++++++
> include/linux/iio/buffer_impl.h | 8 ++++++
> include/uapi/linux/iio/buffer.h | 29 ++++++++++++++++++++
> 3 files changed, 81 insertions(+)
>
> diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c
> index e180728914c0..30910e6c2346 100644
> --- a/drivers/iio/industrialio-buffer.c
> +++ b/drivers/iio/industrialio-buffer.c
> @@ -17,6 +17,7 @@
> #include <linux/fs.h>
> #include <linux/cdev.h>
> #include <linux/slab.h>
> +#include <linux/mm.h>
> #include <linux/poll.h>
> #include <linux/sched/signal.h>
>
> @@ -1585,12 +1586,55 @@ static long iio_device_buffer_getfd(struct iio_dev *indio_dev, unsigned long arg
> return ret;
> }
>
> +static int iio_buffer_enqueue_dmabuf(struct iio_buffer *buffer,
> + struct iio_dmabuf __user *user_buf)
> +{
> + struct iio_dmabuf dmabuf;
> +
> + if (!buffer->access->enqueue_dmabuf)
> + return -EPERM;
> +
> + if (copy_from_user(&dmabuf, user_buf, sizeof(dmabuf)))
> + return -EFAULT;
> +
> + if (dmabuf.flags & ~IIO_BUFFER_DMABUF_SUPPORTED_FLAGS)
> + return -EINVAL;
> +
> + return buffer->access->enqueue_dmabuf(buffer, &dmabuf);
> +}
> +
> +static int iio_buffer_alloc_dmabuf(struct iio_buffer *buffer,
> + struct iio_dmabuf_alloc_req __user *user_req)
> +{
> + struct iio_dmabuf_alloc_req req;
> +
> + if (!buffer->access->alloc_dmabuf)
> + return -EPERM;
> +
> + if (copy_from_user(&req, user_req, sizeof(req)))
> + return -EFAULT;
> +
> + if (req.resv)
> + return -EINVAL;
> +
> + return buffer->access->alloc_dmabuf(buffer, &req);
> +}
> +
> static long iio_device_buffer_ioctl(struct iio_dev *indio_dev, struct file *filp,
> unsigned int cmd, unsigned long arg)
> {
> + struct iio_dev_buffer_pair *ib = filp->private_data;
> + struct iio_buffer *buffer = ib->buffer;
> + void __user *_arg = (void __user *)arg;
> +
> switch (cmd) {
> case IIO_BUFFER_GET_FD_IOCTL:
> return iio_device_buffer_getfd(indio_dev, arg);
> + case IIO_BUFFER_DMABUF_ALLOC_IOCTL:
> + return iio_buffer_alloc_dmabuf(buffer, _arg);
> + case IIO_BUFFER_DMABUF_ENQUEUE_IOCTL:
> + /* TODO: support non-blocking enqueue operation */
> + return iio_buffer_enqueue_dmabuf(buffer, _arg);
> default:
> return IIO_IOCTL_UNHANDLED;
> }
> diff --git a/include/linux/iio/buffer_impl.h b/include/linux/iio/buffer_impl.h
> index e2ca8ea23e19..728541bc2c63 100644
> --- a/include/linux/iio/buffer_impl.h
> +++ b/include/linux/iio/buffer_impl.h
> @@ -39,6 +39,9 @@ struct iio_buffer;
> * device stops sampling. Calles are balanced with @enable.
> * @release: called when the last reference to the buffer is dropped,
> * should free all resources allocated by the buffer.
> + * @alloc_dmabuf: called from userspace via ioctl to allocate one DMABUF.
> + * @enqueue_dmabuf: called from userspace via ioctl to queue this DMABUF
> + * object to this buffer. Requires a valid DMABUF fd.
> * @modes: Supported operating modes by this buffer type
> * @flags: A bitmask combination of INDIO_BUFFER_FLAG_*
> *
> @@ -68,6 +71,11 @@ struct iio_buffer_access_funcs {
>
> void (*release)(struct iio_buffer *buffer);
>
> + int (*alloc_dmabuf)(struct iio_buffer *buffer,
> + struct iio_dmabuf_alloc_req *req);
> + int (*enqueue_dmabuf)(struct iio_buffer *buffer,
> + struct iio_dmabuf *block);
> +
> unsigned int modes;
> unsigned int flags;
> };
> diff --git a/include/uapi/linux/iio/buffer.h b/include/uapi/linux/iio/buffer.h
> index 13939032b3f6..e4621b926262 100644
> --- a/include/uapi/linux/iio/buffer.h
> +++ b/include/uapi/linux/iio/buffer.h
> @@ -5,6 +5,35 @@
> #ifndef _UAPI_IIO_BUFFER_H_
> #define _UAPI_IIO_BUFFER_H_
>
> +#include <linux/types.h>
> +
> +#define IIO_BUFFER_DMABUF_SUPPORTED_FLAGS 0x00000000
> +
> +/**
> + * struct iio_dmabuf_alloc_req - Descriptor for allocating IIO DMABUFs
> + * @size: the size of a single DMABUF
> + * @resv: reserved
> + */
> +struct iio_dmabuf_alloc_req {
> + __u64 size;
> + __u64 resv;
> +};
> +
> +/**
> + * struct iio_dmabuf - Descriptor for a single IIO DMABUF object
> + * @fd: file descriptor of the DMABUF object
> + * @flags: one or more IIO_BUFFER_DMABUF_* flags
> + * @bytes_used: number of bytes used in this DMABUF for the data transfer.
> + * If zero, the full buffer is used.
> + */
> +struct iio_dmabuf {
> + __u32 fd;
> + __u32 flags;
> + __u64 bytes_used;
> +};
> +
> #define IIO_BUFFER_GET_FD_IOCTL _IOWR('i', 0x91, int)
> +#define IIO_BUFFER_DMABUF_ALLOC_IOCTL _IOW('i', 0x92, struct iio_dmabuf_alloc_req)
> +#define IIO_BUFFER_DMABUF_ENQUEUE_IOCTL _IOW('i', 0x93, struct iio_dmabuf)
>
> #endif /* _UAPI_IIO_BUFFER_H_ */
